PB Blaster.....
#1
PB Blaster.....
I'm sure we're all well aware of the amazing product known as PB blaster. It seems to be the can I reach for the most when I'm doing just about anything, because there is always something that needs to move that doesn't. Shoot it with PB blaster and boom, it breaks loose.
It just occurred to me, the can is always covered in the "As seen on T.V." logo. In 25 years I don't remember ever seeing a commercial for PB Blaster. I know I'm a little on the young side, so I was hoping that someone on here may have? Was it on in the early 80's/late 70's?
It just occurred to me, the can is always covered in the "As seen on T.V." logo. In 25 years I don't remember ever seeing a commercial for PB Blaster. I know I'm a little on the young side, so I was hoping that someone on here may have? Was it on in the early 80's/late 70's?
#2
Supreme Member
Join Date: Apr 2006
Location: Northern, CA
Posts: 4,482
Likes: 0
Received 8 Likes
on
8 Posts
Car: 1989 Iroc-Z Camaro
Engine: TBI,5.0
Transmission: Automatic 700R4
Axle/Gears: Eaton Posi,3.42,LPW Ultimate Cover
Re: PB Blaster.....
I have never actually seen one on TV but found this interesting. = With theses videos also = https://www.youtube.com/user/BlasterCorpVideos
Last edited by Ron U.S.M.C.; 05-06-2015 at 12:07 PM.
#4
Supreme Member
iTrader: (2)
Join Date: Apr 2000
Location: Huntsville AL
Posts: 3,938
Received 97 Likes
on
62 Posts
Car: 88GTA
Engine: 5.7TPI
Transmission: Auto
Axle/Gears: 3.27
Re: PB Blaster.....
Never seen it either, but since 1957
This is a really good video though!
https://www.google.com/url?sa=t&rct=...92291466,d.b2w
This is a really good video though!
https://www.google.com/url?sa=t&rct=...92291466,d.b2w
Last edited by Bob88GTA; 05-06-2015 at 01:00 PM.
Trending Topics
#8
Member
Join Date: Jun 2014
Location: South Jersey
Posts: 360
Likes: 0
Received 3 Likes
on
3 Posts
Car: 88 GTA Notch/01'WS-6 VERT
Engine: 5.0 LB-9/5.7 LS-1
Transmission: 700R-4/4L60
Axle/Gears: borg warner 3.27's
Re: PB Blaster.....
pb blaster and kroil have worked well for me in the past but I recently tried this with good results..
http://www.mscdirect.com/product/det...S_010=05037460
http://www.mscdirect.com/product/det...S_010=05037460
#11
Supreme Member
iTrader: (2)
Join Date: Apr 2000
Location: Huntsville AL
Posts: 3,938
Received 97 Likes
on
62 Posts
Car: 88GTA
Engine: 5.7TPI
Transmission: Auto
Axle/Gears: 3.27
Re: PB Blaster.....
No biggie Chris, it's all good. I had fun and its done. Drove it to work last Friday,40 mile R/T,
drove like a new car. Co-workers were drooling and asking all kinds of questions. Could of sold it 3 times so far!
Now, as for the PB Blaster........AMAZING STUFF!
drove like a new car. Co-workers were drooling and asking all kinds of questions. Could of sold it 3 times so far!
Now, as for the PB Blaster........AMAZING STUFF!
#12
Member
Join Date: Jun 2012
Location: San Tan Valley, AZ
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
Car: Silver 1985 IROC-Z
Engine: 350 TPI
Transmission: 700-R4
Re: PB Blaster.....
lol first time I used it was on the brakes on my 85, funny coincidence... or i haven't had enough coffee yet... not sure
#13
Junior Member
Join Date: Nov 2013
Location: Oregon
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1982 Camaro Berlinetta
Engine: Chevy Performance 350
Transmission: Turbo 350
Re: PB Blaster.....
Isn't PB Blaster sort of like WD40? What's different about them? I'm curious.
#15
Supreme Member
Join Date: Apr 2006
Location: Northern, CA
Posts: 4,482
Likes: 0
Received 8 Likes
on
8 Posts
Car: 1989 Iroc-Z Camaro
Engine: TBI,5.0
Transmission: Automatic 700R4
Axle/Gears: Eaton Posi,3.42,LPW Ultimate Cover
Re: PB Blaster.....
I just used it on a O2 Sensor and a Coolant temp sensor.
They would not budge.
A little bit around them and tried it again after 3 hours and it took some effort but they came out.
For hard to reach spots that I don't want to have to blast a stream at I put a small diameter clear plastic hose a foot or two long over the blasters red stem and work the end of the hose to the item.
Gently apply pressure to the can and watch it go slowly down the line .
They would not budge.
A little bit around them and tried it again after 3 hours and it took some effort but they came out.
For hard to reach spots that I don't want to have to blast a stream at I put a small diameter clear plastic hose a foot or two long over the blasters red stem and work the end of the hose to the item.
Gently apply pressure to the can and watch it go slowly down the line .