What year has no gfx on rear bumper?
#1
Junior Member
Thread Starter
Join Date: Dec 2016
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Camaro
Engine: 2.8
Transmission: 700r4
What year has no gfx on rear bumper?
I'm getting new body parts for my 88 camaro and I'm wonder what year did not have gfx on the rear bumper?
#2
Supreme Member
iTrader: (11)
Join Date: Aug 2013
Location: MICHIGAN
Posts: 4,637
Received 751 Likes
on
577 Posts
Car: 1988 Trans Am
Engine: L03
Transmission: 700R4
Axle/Gears: 10 Bolt 2.73 Open
Re: What year has no gfx on rear bumper?
I'm no expert, but I don't think it's as much of an issue of "year" as it is "model" or trim level. I think the base Camaro in almost all years used a "plain" rear bumper cover.
I'll let one of the real Camaro experts set us both straight.
Oh, and Welcome aboard!
I'll let one of the real Camaro experts set us both straight.
Oh, and Welcome aboard!
#3
Supreme Member
Join Date: Nov 2011
Location: CT
Posts: 2,743
Received 258 Likes
on
149 Posts
Car: 1984 Chevrolet Camaro Z28
Engine: 5.0 Liter 4-BBL V8 High Output
Transmission: 5-Speed Manual
Axle/Gears: 3.73
Re: What year has no gfx on rear bumper?
1982-1986 Sport Coupe And Berlinetta
1987 Sport Coupe And LT
1987 Sport Coupe And LT
#4
Supreme Member
iTrader: (15)
Re: What year has no gfx on rear bumper?
Remember though that if your's came with GFX and you remove them it will be evident. The front bumper may have a lip where the lower spoiler attached, the sides (doors and fenders) will have 1/2" holes and the rear fenders will also have holes.
#5
Junior Member
Thread Starter
Join Date: Dec 2016
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Camaro
Engine: 2.8
Transmission: 700r4
Re: What year has no gfx on rear bumper?
Thanks, I ended up filling in the holes on and below the door while i repaired the rust, as for the front and rear bumpers I'm just gonna get new ones.
#6
Supreme Member
iTrader: (167)
Re: What year has no gfx on rear bumper?
Keep I mind:
If your going to swap the bumper covers from the "Z28" cover to the "coupe" bumper cover than you might also need to swap the impact bar "eggshell" impact cushion too. I know the eggshells' are different on the "z28" style and the "coupe" style impact bars,...... but not sure how compatible they are when used together because when I've swapped bumper covers in the past I always swapped the eggshell too.
If your going to swap the bumper covers from the "Z28" cover to the "coupe" bumper cover than you might also need to swap the impact bar "eggshell" impact cushion too. I know the eggshells' are different on the "z28" style and the "coupe" style impact bars,...... but not sure how compatible they are when used together because when I've swapped bumper covers in the past I always swapped the eggshell too.