1988 IROC rolling Chassis ++
#1
Junior Member
Thread Starter
Join Date: Mar 2006
Location: Gardendale Al
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1982 Camaro SC
Engine: Slightly modded SB
Transmission: Turbo 350-modded
Axle/Gears: 3.42 Z-28 Rear
1988 IROC rolling Chassis ++
I have a Black T-top IROC that I'm never gonna finish. I can sell this car as a rolling chassis with no TPI stuff for 1000$, a Rolling chassis with TPI stuff and a fresh 305 with a new XE256 cam and fresh heads for 1500. I would consider trades but NO VEHICLES. I am completely out of room. The car is in nice shape for the age, it has been repainted and the paint was nice and shiny when I parked it outside about 2 years ago. It is dirty now but other than the bumpers (someone used an ATV to "move" it around before I bought it) the car still looks great. I have 2 core trannies, one was sold to me as good but I don't trust it-- therefore they are cores. I also have the aluminum driveshaft that goes with the car, good 16" Z rated tires, stock black IROC wheels, Flowmaster exhaust and other odds and ends. All of this goes with the car for $1500. I do not frequent this site, so please email me at jbelcher337@charter.net with any questions. Thanks
Jason
Jason
#3
Junior Member
Thread Starter
Join Date: Mar 2006
Location: Gardendale Al
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1982 Camaro SC
Engine: Slightly modded SB
Transmission: Turbo 350-modded
Axle/Gears: 3.42 Z-28 Rear
Re: 1988 IROC rolling Chassis ++
What exactly would you like to see pictures of? I can go take all you want, but as of earlier today I moved it to my folks farm, about 20 minutes away. Just want to make sure I get everything you'd like to see on the first trip. Where in GA are you? I have lots of family over there so I could bring it with me on my next trip if your interested in seeing it.
JAson
JAson
#4
Junior Member
Thread Starter
Join Date: Mar 2006
Location: Gardendale Al
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1982 Camaro SC
Engine: Slightly modded SB
Transmission: Turbo 350-modded
Axle/Gears: 3.42 Z-28 Rear
Re: 1988 IROC rolling Chassis ++
Just found the thread I bought it from, here are the pictures he posted: https://www.thirdgen.org/forums/cama...z-rolling.html Car is pretty much the same, I have added a few parts here and there but close to the same. The paint still looks as good, just needs to be washed and waxed so it will shine like that again!
Jason
Jason
#6
Junior Member
Thread Starter
Join Date: Mar 2006
Location: Gardendale Al
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1982 Camaro SC
Engine: Slightly modded SB
Transmission: Turbo 350-modded
Axle/Gears: 3.42 Z-28 Rear
Re: 1988 IROC rolling Chassis ++
Nope, but I can get some ASAP. I'll see if I can get my niece to take a few for me. The carpet is nice, there is a trim panel missing, its the one on the drivers door that holds the carpet in. Not exactly sure where it got off to. The seats are grey and the drivers has one tear that could be repaired fairly easily, IIRC they are power seats, the mirrors and windows are power and seem to work properly. I'll see what I can do about some interior shots, whats your email address?
Jason
Jason
Trending Topics
#8
Junior Member
iTrader: (1)
Join Date: Feb 2007
Location: Silver Creek, Georgia
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 Iroc Z
Engine: 5.0 TPI
Transmission: 700R4
Axle/Gears: 3.42
Re: 1988 IROC rolling Chassis ++
I read the other thread about the car. Have you already wired it up for tpi? If I got it I would put my carb V8 in it.
Thread
Thread Starter
Forum
Replies
Last Post
mustangman65_79
Body
3
08-11-2015 03:17 PM