89rs305-DP

Selling my 1989 Camaro RS. I've had the car for 5 years now and just want something different. It originally came with a 305 TBI, but I swapped it for a 350. The car makes about an estimated 400hp and runs a 12.3 1/4 mile. It could easily be in the 11's with an aftermarket torque converter. The body of the car is in decent shape, but not perfect. There is some rust just starting to bubble up on the rear wheel wells. The underside of the car has some rust and has been patched in a few places. The car runs and drives perfect and has plenty of power. I tuned the carb using an AEM wideband a/f gauge and it starts easy and idles nice, great throttle response. It doesn't leak any oil, and needs nothing. $4500. Located in Green Bay WI

Engine mods:
358ci (bored .040)
Flat top pistons
Vortec heads- with the valve guides machined down for a high lift cam
Edelbrock Performer RPM intake
Comp Cams Magnum 270h camshaft
Stiffer valvesprings
Hooker competition shorty headers
HEI distributor
Holley 670 Street Avenger carb
Nitrous kit -175 shot, Edelbrock nitrous plate, NOS solonoids, NOS bottle, fuel pressure saftey switch, RPM window switch, bottle heater, bottle blanket, WOT switch
8mm spark plug wires
New alternator
New water pump
Quick Fuel fuel pressure regulator
New walbro fuel pump
Custom exhaust done by Exhaust Pros in Green Bay. Magnaflow muffler with dual 3" stainless Magnaflow tips. It has a removable cutout flange just before the rear tire


Trasmisson & Drivetrain Mods
Powertrax ratcheting locker in the differential
3:43 gears
700r4 transmission was rebuilt about 2 years ago and shifts perfectly
New torque converter with lockup
Corvette trans servo
I have a transgo shift kit for it that i never installed

Chassis & Suspension Mods
Founders Performance tubular lower control arms
Founders panhard rod
Founders lower control arm relocation brackets
Polyurethane transmission mount
Polyurethane torque arm bushing
Z28 "Wonder Bar" steering stabilizer
Z28 Larger sway bars
Polyurethane sway bar links & bushings
Drive shaft safety loop
1" rear wheel spacers

Other
3" Harwood fiberglass cowl hood
Iroc-Z wheels - 2 tires are good, 2 are pretty bald
A pair of Mickey Thompson drag slicks mounted on Weld Prostar rims
Grant Steering wheel
Dash cover is in excellent condition- no cracks at all, which is pretty rare
Power windows work, and hatch pull-down works


$4500 Located in Green Bay, WI
Contact me with any questions at 920-544-3335
Please leave a voicemail if I dont answer

89rs305-DP

Bump. Price lowered to $3900. That's a steal!

89rs305-DP

SOLD!