Convertibles Discussed here are problems and solutions to convertible specific questions, including difficult to find part numbers and other convertible tech help.

Why is there no uniformity with vert specific pieces on the car

Thread Tools
 
Search this Thread
 
Old 09-13-2013, 09:30 PM
  #1  
Supreme Member

Thread Starter
iTrader: (1)
 
86FyrBrd's Avatar
 
Join Date: Jan 2001
Location: Quakertown, PA
Posts: 2,117
Likes: 0
Received 18 Likes on 7 Posts
Car: 1992 Camaro Z28 Convertible Z03
Engine: 383 SuperRam
Transmission: 700R4
Axle/Gears: 2.73
Why is there no uniformity with vert specific pieces on the car

Some have the tonneau releases in the console, some in the cover itself.

Some have pull down hatches, some don't.

Some have plastic trunk panels, some have like a rigid carpet.

Some have lights under the speakers, some don't.

Black deluxe interior speaker side panels have the hatch pattern, red doesn't

I don't know the differences but apparently some have different style seat belts too.

A lot of this stuff is mixed in the same model years. I am sure there is much much more but is there any reason for any of it? I can't make sense of it but it makes figuring out originality much harder.
Old 09-14-2013, 10:15 AM
  #2  
Member

 
Da Spudro's Avatar
 
Join Date: Aug 2007
Location: Panhandle of Florida
Posts: 386
Received 0 Likes on 0 Posts
Car: 85 IROC / 92 Z28 Vert / 57 210
Engine: L69 / LB9 / LQ4
Transmission: T5 / T56 / 4L65E
Axle/Gears: 3:73 / 3.73 / ?.??
Re: Why is there no uniformity with vert specific pieces on the car

There are a lot of possible answers to this. Some could be as simple as since there were not lot of convertibles made, parts are hard to get, so when they break they get swapped from different years and made to work - leading to inconsistency.

Another is that since these cars were all converted and were never truly "factory" made like the mustang convertibles which were actually built and designed as a convertible, it could be when they updated the design of certain features they didn't have enough of the new style and because of this change they had to keep up with demand and to avoid getting backed up on the line so they used the older style on the shelves to push the car through.

I believe I also heard somewhere that some of these updates and upgrades happened mid year production which probably adds to the inconsistency. For example I think the tonnue switch was moved mid 91. The seatbelt risers were mid 92 if I remember right. All of these were probably on the fly design changes to make things work better and eliminate some complaints or problems people may have had with them. As these cars were all "custom" made in a sence its not surprising to me the level of inconsistancy..

Last edited by Da Spudro; 09-14-2013 at 10:18 AM.
Old 10-23-2013, 09:46 AM
  #3  
Moderator

 
okfoz's Avatar
 
Join Date: Mar 2001
Location: Doghouse ······································ Car: 1989 Formula 350 Vert Engine: 350 L98 Transmission: 700R4 Axle/Gears: B&W 3.27
Posts: 14,235
Received 163 Likes on 118 Posts
Car: 87 Formula T-Top, 87 Formula HT
Engine: 5.1L TPI, 5.0L TPI
Transmission: 700R4, M5
Axle/Gears: Sag 3.73, B&W 3.45
Re: Why is there no uniformity with vert specific pieces on the car

Originally Posted by 86FyrBrd
Some have the tonneau releases in the console, some in the cover itself.
This is a mid year change, starting at 1991 VIN 177403 and up used the switch in the Tonneau cover. Prior to that had the switch in the center console. All "Factory" Firebird Convertibles had the switch in the tonneau...

Originally Posted by 86FyrBrd
Some have pull down hatches, some don't.
Again, year to year changes. Since the Convertibles were basically T-top cars converted, and all T-top cars had the pull down (I think 1987-1991) the later 1991 and 1992 (again) had a different pull down mechanism. They were smaller, the advantage to this design was they could incorporate the earlier non hatch pull-down type mechanism. I ran into this on accident, I had an early 1991 that needed a hatch pulldown, and I went to the junkyard, found a 91 or 92 and got the mechanism, only to realize it was smaller than the one on my 87, 89 and early 1991...


Originally Posted by 86FyrBrd
Some have plastic trunk panels, some have like a rigid carpet.
Again change in 1991

The rear compartment plastic panels, and later carpet, there was 3 styles.
1) early thru 1989 VIN 158142 (Design 1)
2) (89) 158143 thru (91) 177402 (Design 2)
3) 177403 and up used the Carpet,

I believe all "factory" Firebirds had the carpet from 1991 & up.

Technically the plastic panels in the early cars I believe were all trimmed coupe panels... so if you like them, find them in a junkyard, cut and install.

Originally Posted by 86FyrBrd
Some have lights under the speakers, some don't.
Never seen lighting in the rear seat areas, only on the 4th gens have I seen this... not saying it does not exist, but not noticed them.

Originally Posted by 86FyrBrd
Black deluxe interior speaker side panels have the hatch pattern, red doesn't
May be a limit of material availability. Keep in mind 85-92 convertibles were hand made, all of them were, (actually the 4th gens were too) Because these are limitied production runs, they probably did not want to buy a batch of material for a handful of red interior cars.

Originally Posted by 86FyrBrd
I don't know the differences but apparently some have different style seat belts too.
Early/late, there was a change somewhere along the lines to how the belts mounted to the body.

Originally Posted by 86FyrBrd

A lot of this stuff is mixed in the same model years. I am sure there is much much more but is there any reason for any of it? I can't make sense of it but it makes figuring out originality much harder.
1991 is probably the most miserable year to figure this out. I might be able to help a little, As an example the Firebird, you might find two production figures. The reason is for 1990 was a partial year, however for dealer production information, the information went from August 1 of Year 1 to September 30 of Year 2 therefore the number may be higher... So if you look at some sources they will site the dealer production information, not the Model year production information.

For example there was 20,532 Firebird's made for the 1990 model year because production stopped on Dec 31, 1989, Production of the 1991 started in Feb 1990, (oddly there was 13 1991 Firebirds and 13 1991 Camaros that were made in October of 1989) however one source shows 46760 because they included 26228 cars that would have been built if the model year was a normal model year. Some of this is available,

Last edited by okfoz; 10-23-2013 at 09:59 AM.
Old 10-23-2013, 01:09 PM
  #4  
Member

 
Prime's Avatar
 
Join Date: Aug 2001
Location: Flatwoods WV
Posts: 193
Likes: 0
Received 0 Likes on 0 Posts
Car: 91 Firebird Vert
Engine: LO3
Transmission: 700R4
Axle/Gears: 3.42
Re: Why is there no uniformity with vert specific pieces on the car

Originally Posted by 86FyrBrd
Some have lights under the speakers, some don't.
Originally Posted by okfoz
Never seen lighting in the rear seat areas, only on the 4th gens have I seen this... not saying it does not exist, but not noticed them.
My 91 Firebird vert has the rear pass compartment lighting so it does exist.
Old 10-23-2013, 01:22 PM
  #5  
Supreme Member

iTrader: (9)
 
yankeecarman's Avatar
 
Join Date: Sep 2002
Location: Melbourne Australia but from South Carolina
Posts: 1,084
Received 19 Likes on 17 Posts
Car: 1991 Trans Am convertible
Engine: 305 TPI
Transmission: Auto
Re: Why is there no uniformity with vert specific pieces on the car

mine does too
Old 10-23-2013, 02:06 PM
  #6  
Moderator

 
okfoz's Avatar
 
Join Date: Mar 2001
Location: Doghouse ······································ Car: 1989 Formula 350 Vert Engine: 350 L98 Transmission: 700R4 Axle/Gears: B&W 3.27
Posts: 14,235
Received 163 Likes on 118 Posts
Car: 87 Formula T-Top, 87 Formula HT
Engine: 5.1L TPI, 5.0L TPI
Transmission: 700R4, M5
Axle/Gears: Sag 3.73, B&W 3.45
Re: Why is there no uniformity with vert specific pieces on the car

Might have been something introduced in 1991 then... Never noticed, sorry...

I wish mine did, it is a real pain seeing at night, could only imagine if the interior was black.

Could you get a pic? I wonder if it is not the same as the 4th gens...
Old 10-23-2013, 05:54 PM
  #7  
Member

 
Prime's Avatar
 
Join Date: Aug 2001
Location: Flatwoods WV
Posts: 193
Likes: 0
Received 0 Likes on 0 Posts
Car: 91 Firebird Vert
Engine: LO3
Transmission: 700R4
Axle/Gears: 3.42
Re: Why is there no uniformity with vert specific pieces on the car

No problem. Here is mine. Overlook the mess please, I am in the process of getting the car ready for the road again (for the first time in almost 6 years) over the winter. I have no idea if it is the same as fourth gens or not.

Name:  20131023_184528.jpg
Views: 73
Size:  87.7 KB
Old 10-24-2013, 12:43 PM
  #8  
Moderator

 
okfoz's Avatar
 
Join Date: Mar 2001
Location: Doghouse ······································ Car: 1989 Formula 350 Vert Engine: 350 L98 Transmission: 700R4 Axle/Gears: B&W 3.27
Posts: 14,235
Received 163 Likes on 118 Posts
Car: 87 Formula T-Top, 87 Formula HT
Engine: 5.1L TPI, 5.0L TPI
Transmission: 700R4, M5
Axle/Gears: Sag 3.73, B&W 3.45
Re: Why is there no uniformity with vert specific pieces on the car

I had a 1995 Formula Vert... All I remember is it was rectangular... It kind of looked like that but I just do not remember the specifics...

Wish mine had that...

The Courtesy Lamp part number is 12511358, includes the Cover and the housing with apparently a wire that goes to the harness.

I did just learn that you could still get the 16163615 speakers for the rear from GM... $31.20 each...

John

Last edited by okfoz; 10-24-2013 at 12:47 PM.
Old 10-24-2013, 03:11 PM
  #9  
Supreme Member

Thread Starter
iTrader: (1)
 
86FyrBrd's Avatar
 
Join Date: Jan 2001
Location: Quakertown, PA
Posts: 2,117
Likes: 0
Received 18 Likes on 7 Posts
Car: 1992 Camaro Z28 Convertible Z03
Engine: 383 SuperRam
Transmission: 700R4
Axle/Gears: 2.73
Re: Why is there no uniformity with vert specific pieces on the car

Yeah, here in these pics you can see two differences mentioned. The black panel in the car now has the light and the patterned fabric up top. The red panel going into the car has no light (It will) and even though it came out of a car with the same pattern interior... solid textured fabric.
Attached Thumbnails Why is there no uniformity with vert specific pieces on the car-photo-1.jpg   Why is there no uniformity with vert specific pieces on the car-photo-2.jpg  
Old 12-17-2013, 12:36 PM
  #10  
Senior Member
 
86T/A_Ram_Air's Avatar
 
Join Date: Mar 2009
Location: Brick, NJ
Posts: 870
Likes: 0
Received 0 Likes on 0 Posts
Car: 91 Trans Am
Engine: 355 TPI
Transmission: Built T-5
Re: Why is there no uniformity with vert specific pieces on the car

I also had those lights in my Z28 vert. That car was a 91. I do not have a pic of the light though
Old 12-27-2016, 04:39 AM
  #11  
Member
iTrader: (2)
 
1992 Trans Am's Avatar
 
Join Date: May 2015
Location: Los Angeles, CA
Posts: 453
Received 8 Likes on 8 Posts
Car: 1992 Pontiac Trans Am Convertible
Engine: 5.0L 305ci TPI
Transmission: 5 Speed Manual, World Class T-5
Axle/Gears: 3.08
Re: Why is there no uniformity with vert specific pieces on the car

My 92 TA does as well.
Old 12-27-2016, 06:16 PM
  #12  
Member

 
cougar20th's Avatar
 
Join Date: Jun 2000
Location: Amherst NH
Posts: 125
Likes: 0
Received 1 Like on 1 Post
Car: Black 88 Iroc Convertable
Re: Why is there no uniformity with vert specific pieces on the car

My 88 Irocs rear speaker panels were originally solid black even with the rest of the interior having the textured black/gray.

Eventually found a matching black/gray set in a junkyard.
Old 12-28-2016, 10:23 AM
  #13  
Moderator

 
okfoz's Avatar
 
Join Date: Mar 2001
Location: Doghouse ······································ Car: 1989 Formula 350 Vert Engine: 350 L98 Transmission: 700R4 Axle/Gears: B&W 3.27
Posts: 14,235
Received 163 Likes on 118 Posts
Car: 87 Formula T-Top, 87 Formula HT
Engine: 5.1L TPI, 5.0L TPI
Transmission: 700R4, M5
Axle/Gears: Sag 3.73, B&W 3.45
Re: Why is there no uniformity with vert specific pieces on the car

Speaker has been discontinued :< Should have bought them when I could have
Old 12-28-2016, 12:36 PM
  #14  
Supreme Member

iTrader: (10)
 
blacksunshine'91's Avatar
 
Join Date: Sep 2000
Location: Moorpark, CA
Posts: 2,376
Likes: 0
Received 138 Likes on 98 Posts
Car: '91 GTA, '92 T/A Convertible
Engine: GTA: 350 w/Vortec heads, T/A: 305
Transmission: Pro-built 700R4
Axle/Gears: GTA: 3.27, T/A: 2.73
Re: Why is there no uniformity with vert specific pieces on the car

Originally Posted by okfoz
Speaker has been discontinued :< Should have bought them when I could have
I have one if you are interested. Pulled it from my '92 a couple months ago. Still works fine. PM me if you want it.

Eldon
Old 01-02-2017, 09:10 PM
  #15  
Supreme Member

iTrader: (101)
 
my82roc's Avatar
 
Join Date: Feb 2004
Location: Levittown Pa
Posts: 1,914
Likes: 0
Received 17 Likes on 16 Posts
Car: 89 Iroc Convertible
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: 3.27 Posi 9 bolt PBR
Re: Why is there no uniformity with vert specific pieces on the car

I have 3 pairs of factory rear convertible speakers if your interested
Old 01-03-2017, 02:41 AM
  #16  
Member
iTrader: (2)
 
1992 Trans Am's Avatar
 
Join Date: May 2015
Location: Los Angeles, CA
Posts: 453
Received 8 Likes on 8 Posts
Car: 1992 Pontiac Trans Am Convertible
Engine: 5.0L 305ci TPI
Transmission: 5 Speed Manual, World Class T-5
Axle/Gears: 3.08
Re: Why is there no uniformity with vert specific pieces on the car

Im definitely interested in one of those sets. Are they new or used? Can you send me pics of the best set you have and let me know how much you'd like for the set? Thanks!

Originally Posted by my82roc
I have 3 pairs of factory rear convertible speakers if your interested
Old 01-03-2017, 06:20 PM
  #17  
Supreme Member

iTrader: (101)
 
my82roc's Avatar
 
Join Date: Feb 2004
Location: Levittown Pa
Posts: 1,914
Likes: 0
Received 17 Likes on 16 Posts
Car: 89 Iroc Convertible
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: 3.27 Posi 9 bolt PBR
Re: Why is there no uniformity with vert specific pieces on the car

pics....the other pair I have is still attached to the rear speaker panels so i dont have any pics of those
Attached Thumbnails Why is there no uniformity with vert specific pieces on the car-img_4371.jpg   Why is there no uniformity with vert specific pieces on the car-img_4372.jpg   Why is there no uniformity with vert specific pieces on the car-img_4373.jpg   Why is there no uniformity with vert specific pieces on the car-img_4374.jpg  
Old 01-07-2017, 07:06 AM
  #18  
Member
 
chris schaner's Avatar
 
Join Date: Mar 2009
Location: wa
Posts: 107
Likes: 0
Received 2 Likes on 2 Posts
Car: 1990 irocz camaro
Engine: 350 tpi
Transmission: auto
Axle/Gears: 3.42 posi disc 10 bolt
Re: Why is there no uniformity with vert specific pieces on the car

how much for the speaker rear pair
Old 01-10-2017, 06:05 PM
  #19  
Supreme Member

iTrader: (101)
 
my82roc's Avatar
 
Join Date: Feb 2004
Location: Levittown Pa
Posts: 1,914
Likes: 0
Received 17 Likes on 16 Posts
Car: 89 Iroc Convertible
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: 3.27 Posi 9 bolt PBR
Re: Why is there no uniformity with vert specific pieces on the car

Originally Posted by chris schaner
how much for the speaker rear pair
Where are you located?
Old 01-14-2017, 12:15 PM
  #20  
Member
 
chris schaner's Avatar
 
Join Date: Mar 2009
Location: wa
Posts: 107
Likes: 0
Received 2 Likes on 2 Posts
Car: 1990 irocz camaro
Engine: 350 tpi
Transmission: auto
Axle/Gears: 3.42 posi disc 10 bolt
Re: Why is there no uniformity with vert specific pieces on the car

washington ,kent
Old 01-18-2017, 05:33 PM
  #21  
Senior Member

 
ThePain's Avatar
 
Join Date: Jul 2008
Location: Alaska
Posts: 623
Received 13 Likes on 12 Posts
Car: 1992 RS
Transmission: Automatic
Re: Why is there no uniformity with vert specific pieces on the car

How do you change the rear light bulbs under the speaker? Mine are okay but it would be good to know how to get in there just in case.
Old 01-18-2017, 07:40 PM
  #22  
Supreme Member

Thread Starter
iTrader: (1)
 
86FyrBrd's Avatar
 
Join Date: Jan 2001
Location: Quakertown, PA
Posts: 2,117
Likes: 0
Received 18 Likes on 7 Posts
Car: 1992 Camaro Z28 Convertible Z03
Engine: 383 SuperRam
Transmission: 700R4
Axle/Gears: 2.73
Re: Why is there no uniformity with vert specific pieces on the car

the whole housing clips into the panel. think you just carefully pry it out.
Old 01-18-2017, 07:53 PM
  #23  
Member
iTrader: (2)
 
1992 Trans Am's Avatar
 
Join Date: May 2015
Location: Los Angeles, CA
Posts: 453
Received 8 Likes on 8 Posts
Car: 1992 Pontiac Trans Am Convertible
Engine: 5.0L 305ci TPI
Transmission: 5 Speed Manual, World Class T-5
Axle/Gears: 3.08
Re: Why is there no uniformity with vert specific pieces on the car

The lenses are miunted in the panel with pressure clips. Just gently pull/pry the lens assembly away from the trim panel.

Originally Posted by ThePain
How do you change the rear light bulbs under the speaker? Mine are okay but it would be good to know how to get in there just in case.
Old 01-25-2017, 03:41 AM
  #24  
Senior Member

 
ThePain's Avatar
 
Join Date: Jul 2008
Location: Alaska
Posts: 623
Received 13 Likes on 12 Posts
Car: 1992 RS
Transmission: Automatic
Re: Why is there no uniformity with vert specific pieces on the car

Nice, thanks for the heads up guys.


As for the topic at hand.... I always assumed they just ran out of the nice plastic panels as others have speculated.


I wish I had the plastic ones instead of my dumb black carpet.
Old 01-25-2017, 09:41 AM
  #25  
Senior Member

 
Vanilla Ice's Avatar
 
Join Date: Aug 2002
Location: ARIZONA
Posts: 948
Likes: 0
Received 4 Likes on 4 Posts
Car: 92 Trans Am Conv
Engine: LB9
Transmission: T5
Axle/Gears: 3.08
Re: Why is there no uniformity with vert specific pieces on the car

Originally Posted by ThePain
Nice, thanks for the heads up guys.


As for the topic at hand.... I always assumed they just ran out of the nice plastic panels as others have speculated.


I wish I had the plastic ones instead of my dumb black carpet.
You could always buy some.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
05-10-2023 07:19 PM
midge54
LTX and LSX
21
12-27-2019 04:14 PM
Poncho92
Group Purchases
4
08-25-2015 02:17 PM
MY87LT
Transmissions and Drivetrain
12
08-17-2015 08:43 AM
Poncho92
Body
0
08-07-2015 08:15 PM



Quick Reply: Why is there no uniformity with vert specific pieces on the car



All times are GMT -5. The time now is 05:55 PM.