Cruise control wiring
#1
Junior Member
Thread Starter
Join Date: Jun 2004
Location: hollywood maryland (st. mary's county)
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87coupe,91RS Camaro's, 00 Suburban
Engine: LSX427HO w/D-1SC and intercooler
Transmission: RPM Tremec T-56 Magnum
Axle/Gears: DTS 12bolt, 3.42
Cruise control wiring
One more time, I have a 91 camaro with factory cruise control in it and have stuffed a LSX427 w/D-1 on it into the car. The motor came from Mast Motorsports with a full harness and computer(M-90) also a wired Vette pedal.
I would like to know how to hook the Mast to stock harness up. The Mast has the wires coded but need to know what to cut and splice on the stock cruise. The vaccum doesn't have to be used.....Any ideas
tks for your time
I would like to know how to hook the Mast to stock harness up. The Mast has the wires coded but need to know what to cut and splice on the stock cruise. The vaccum doesn't have to be used.....Any ideas
tks for your time
#2
Supreme Member
iTrader: (24)
Join Date: Jun 2005
Location: NC
Posts: 7,890
Likes: 0
Received 59 Likes
on
43 Posts
Car: 92 Firebird
Engine: Supercharged 6.0
Transmission: T56
Axle/Gears: 8.8 3.73
Re: Cruise control wiring
90-92 cars have all the necessary cruise wires in a connector under the pass side of the dash near the ECM
C209 in this diagram
http://www.austinthirdgen.org/mkport...se_control.jpg
All 4 run to the TAC module in your DBW harness
C209 in this diagram
http://www.austinthirdgen.org/mkport...se_control.jpg
All 4 run to the TAC module in your DBW harness
#3
Supreme Member
Re: Cruise control wiring
Apologies, wrong forum. Did a search and realized this was in electronics instead of LTX/LSX swap.
Chuck
Chuck
Last edited by Chuck!; 07-06-2015 at 03:06 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Ghettobird52
Tech / General Engine
15
12-29-2023 08:23 AM
eightsixseven
Tech / General Engine
1
08-14-2015 03:09 PM
Street Lethal
Engine/Drivetrain/Suspension Parts for Sale
3
08-13-2015 08:28 PM
1988, 1990, 1991, 90, camaro, connections, control, cruise, ecm, gen, m90, suburban, troubleshoot, troubleshooting, wiring