Engine Scanner
#1
Member
Thread Starter
iTrader: (4)
Join Date: Nov 2003
Location: Virginia
Posts: 260
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 GTA
Engine: 5.7 ltr.
Transmission: 700R4
Axle/Gears: 3:27 9 Bolt Borg Warner
Engine Scanner
Can anybody recommend me a descent engine scanner to run and clear codes on my 89, 5.7ltr. tpi transam gta. Is there a ALDL cable out there with USB to connect to your laptop, with cd, (software) ?
Thanks in advance.
Thanks in advance.
#2
Supreme Member
iTrader: (13)
Join Date: Apr 2005
Location: Not in Kansas anymore
Posts: 7,732
Likes: 0
Received 11 Likes
on
11 Posts
Car: 82 Z28
Engine: 383 SP EFI/ 4150 TB
Transmission: T400
Axle/Gears: QP 9" 3.73
Re: Engine Scanner
If all you want to do is see stored codes then jumpering A and B on the ALDL connector will make the Chk engine light flash the codes.
For a Vette but same for F-Body
http://www.corvettebuyers.com/c4vettes/codes.htm
On a '89 disconnecting the battery clears the stored codes.
Cable to connect to ECM
http://www.aldlcable.com/
and use free software like TunerPro on a laptop.
http://www.tunerpro.net/
Lets you monitor the engine sensors in real time as it is running
For a Vette but same for F-Body
http://www.corvettebuyers.com/c4vettes/codes.htm
On a '89 disconnecting the battery clears the stored codes.
Cable to connect to ECM
http://www.aldlcable.com/
and use free software like TunerPro on a laptop.
http://www.tunerpro.net/
Lets you monitor the engine sensors in real time as it is running
#3
Supreme Member
Join Date: Sep 2002
Location: Cary, North Carolina
Posts: 9,192
Likes: 0
Received 16 Likes
on
16 Posts
Car: 1992 RS
Engine: Carbed 350
Transmission: 700R4
Axle/Gears: 3.42 posi
Re: Engine Scanner
Best scan tool for the money is a paperclip and this: https://www.thirdgen.org/service-eng...ht-error-codes
To clear codes, disconnect the battery for a few minutes.
To clear codes, disconnect the battery for a few minutes.
Thread
Thread Starter
Forum
Replies
Last Post