Auto Meter Fuel gauge wiring?
08-03-2015, 08:49 PM
#1
Junior Member
Thread Starter
iTrader: (1)
Join Date: Mar 2004
Location: IL
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROC-Z
Engine: L-98 350 TPI
Transmission: 700R4
Auto Meter Fuel gauge wiring?
I bought the compleat 6 gauge panel with auto meter gauges and wire harness from hawksthirdgenparts. All gauges are wired and working besides the fuel level gauge. Fuel level gauge only works from 1/2 to full. The gauge goes from full to 1/2 when puting gas in it. Opposite of what it should be. Never a full sweap from full to empty.
Wires going to fuel level gauge. Pink wire to (Sender). 2 pink with black stripe
To (I) 12v ignition source. Black wire to ground. All wires listed are part of the wire harness made by American Autowire. The harness requires you to wire gauge harness to factory wires.
American Autowire harness wires- pink to factory sender wire pink/purple. Pink/black to factory (3) pink/black. Black wire to ground. Sorry if this sounds confusing. A lot going on and hard to explain. Any help would be appreciated. Thanks!!
Wires going to fuel level gauge. Pink wire to (Sender). 2 pink with black stripe
To (I) 12v ignition source. Black wire to ground. All wires listed are part of the wire harness made by American Autowire. The harness requires you to wire gauge harness to factory wires.
American Autowire harness wires- pink to factory sender wire pink/purple. Pink/black to factory (3) pink/black. Black wire to ground. Sorry if this sounds confusing. A lot going on and hard to explain. Any help would be appreciated. Thanks!!
Thread
Thread Starter
Forum
Replies
Last Post
Ghettobird52
Tech / General Engine
15
12-29-2023 08:23 AM
db057
TBI
10
08-11-2015 10:11 PM
