MC87SS

iTrader: (33)

I can try to get you one with the rubber isolator but won't be able to have them until next weekend.
From what i can tell they only came that way 1 year so they are harder to find.

MC87SS

iTrader: (33)

Thanks, Glad your happy with it.


Sold out of this batch.
PM me to get on the waiting list for the next batch.

92-Formula

iTrader: (4)

Another happy customer here. One of the best upgrades you can do. Also - installing the astro bearing is a breeze, definitely worth the $10. Just keep in Mind you will have to shave a bit off the top of the steering column end as mentioned before - I tapped it with a dremel a few times and it was more than enough.

Johnny Blaze

iTrader: (15)

Does the bearing go into the steering column itself?

MC87SS

iTrader: (33)

Yes it does.

Johnny Blaze

iTrader: (15)

I'll be interested in a bearing when you have some avalible. Not tearing into my car for at least another month.

N.J.-SLICK-1

I got mine today and I'm proud to see all the attention to detail you have put into your product, it will really make the rest of my engine bay look bad!lol. No really it looks great and I thank you for looking out for me on the payment arrangement deal!

Dueling73s

iTrader: (4)

Got my bearing this week to go with the new shaft. Nice combination and MC is great to deal with Thanks!!

MC87SS

iTrader: (33)

Thanks Guys.
Glad everyone is happy.
I pride myself on 100% satisfaction & super fast shipping and communication.
Others may try to sell for less but cheaper isn't always better.
Mine are nice, rust free southern shafts.
Have more shafts & bearings on the way, pm me if you want one.

MC87SS

iTrader: (33)

PM Sent.

I have plenty of bearings now ready to ship with the shafts.
Jeep & GM Shafts will be ready to ship by the end of the week.

PM me if you want one.

galletti

PM sent

DiabloWS6

iTrader: (8)

Oh well the only reason it has the rubber isolator is to help stop road vibration right

6SIX6

iTrader: (35)

Got mine today. Sweet piece

MC87SS

iTrader: (33)

Thats the theory, i personally did not notice a difference but i only tried one for a few miles then put my chrome Jeep shaft back on. I only did it to test it.

DiabloWS6

iTrader: (8)

Well looks like i would need that isolater roads are not all that great were i live

MC87SS

iTrader: (33)

I have some Jeep Shafts ready, $60 shipped in the states.

I should have a couple GM Shafts ready after this weekend, have 5 on the way and 3 are already spoken for.

MC87SS

iTrader: (33)

Just got some more GM Shafts & Bearings.
PM me if you are interested.

Still have a few Jeep Shafts also.

cc 82Z-28

iTrader: (7)

MC87SS I have sent you a pm about one of you steering shafts for GM. Also, to those of you have done this, how's it working for you? I have replaced pretty much all the suspension components front to rear of my car as well as sfc's and strut tower brace and the steering shaft and rag joint are still original to the car and in need of replacement. Thanks for any input form those you have done this.

MC87SS

iTrader: (33)

Replied.

This batch was sold out before i even had them ready to ship.
Guess i had better get some more on the way.
PM me to get on the waiting list.

Thanks Everyone.

MC87SS

iTrader: (33)

Many have asked the difference in clearance between the Jeep Shaft & the GM Shaft. Here is a side by side comparison of the upper end.
The black one is the Jeep Shaft.

wbstearns

received and all looks awesome hope to install it in next week or so not in a huge hurry as i am not even building the engine yet but want to get it in and see how it looks and how bad it makes the rest of the engine bay look

MC87SS

iTrader: (33)

LOL Thanks.
Glad your happy with it.

Have a few more on the way, PM me if you want one.

Still have a few Jeep Shafts for $60 shipped if anyone would prefer that.

MC87SS

iTrader: (33)

Have more GM Shafts on the way.
3 solid & 2 with the rubber isolator.
PM me if you want one.

Still have a few Astro Bearings, cleaned, greased and ready to go.

UnstableAviator

I received mine a few days ago too. This thing looks and feels brand new.

Thanks MC87SS!

MC87SS

iTrader: (33)

Thanks for the feedback.
I do my best to make sure everyone is 100% satisfied.

MC87SS

iTrader: (33)

Have more in stock, ready to ship Friday.

MC87SS

iTrader: (33)

Have Jeep Shafts, GM Shafts & Astro Bearings in stock & ready to ship.

MC87SS

iTrader: (33)

All GM Shafts are spoken for except 1 solid & 1 with the rubber isolator.

I also have the astro bearings available for an additional $10 if shipped with a shaft.

PM me if you want one.

Still have a couple Jeep shafts also.

Slush92RS

iTrader: (6)

I'm assuming this is also compatible with the manual steering boxes like the one ive swapped into my RS

cougar68

iTrader: (2)

I will take one with the rubber isolator and an astro bearing.

send me your paypal info and i will send the payment.

MC87SS

iTrader: (33)

I see no reason it would be any different.

MC87SS

iTrader: (33)

Sold out of both style shafts.
Should have more this weekend.
Send me a PM to get on the waiting list, i don't expect to get many this batch so 1st come 1st serve.

MC87SS

iTrader: (33)

All the GM shafts i got were already spoken for but i have more on the way for next week.

I do have a few nice Jeep shafts in stock and ready to ship.

PM me if you want one.

MC87SS

iTrader: (33)

3 Jeep Shafts left ready to ship.
2 - 3 day shipping to most of the states.
PM me if you want one.

MC87SS

iTrader: (33)

1 Jeep Shaft Left.
PM me if you want it.

cougar68

iTrader: (2)

Thanks for the fast shipping, probably won't install for a month or so but glad i have it when i am ready.

MC87SS

iTrader: (33)

Have a couple more GM Shafts in stock.
Have Rubber & Solid.
PM me if you want one.

MC87SS

iTrader: (33)

I have 2 left with the rubber isolator, ready to ship.
PM me if you want one.

MC87SS

iTrader: (33)

1 Left with Rubber Isolator ready to ship, also have 1 Astro bearing ready to ship with the shaft for an additional $10

MC87SS

iTrader: (33)

Sold out, thanks Everyone.
I will work on getting some more.
If you want to get on the waiting list for the next batch send me a PM.
Thanks.

KG427KG427

iTrader: (1)

What benefits do you get from this upgrade.

I have a 91 Camaro I'm guessing I should go with the GM part

Johnny Blaze

iTrader: (15)

no benefit yet, my car is in a thousand pieces.

I expect a little more clearence, clea
er appearance, and firmer more responsive steering.

CAN88BIRD

Got mine the other day, well packaged, seller was easy to deal with and the product looks great too.

MC87SS

iTrader: (33)

Thanks, glad you are happy with everything.

Its been slim pickings lately on the shafts. I have been getting a couple here and there but usually have more people on the waiting list then i can get shafts for.
Hopefully supplies will get better now that the weather is getting warmer.
I have talked to a few people about pulling the shafts and shipping them to me to prep and sell but so far only 1 person is helping me get them.

I will keep everyone informed.

MC87SS

iTrader: (33)

Picked up some Jeep & GM Shafts yesterday and have more on the way.
PM me if you want one.

I remembered to take a few pics while doing the prep and figured i'd share so everyone can see how much work i put into these.
Although this is a Jeep Shaft i do all the same things to the GM Shaft plus clock them 90 degrees so they bolt right in.

This is what they look like after i separate and clean them.
Compare this pic to the 3rd, you will see where i weld them to eliminate any slippage.



I clean the threads on both the shaft and bolts.



I carefully split and remove the plastic bushings and ship at least 1 with each shaft so they can be put back on after all the test fitting is done and your ready for the final install. I do this so it makes it easier to install and so they don't get destroyed during the prep process. I also clean the inner part of the shaft with a wire brush and grease it before shipping.

MC87SS

iTrader: (33)

Just got confirmation i have 6 more Solid GM Shafts on the way.
PM me if you want one.

MC87SS

iTrader: (33)

4 Left.

PM me if you want one.

MC87SS

iTrader: (33)

2 left, 6 more on the way.

PM me if you want one

actarnoff

iTrader: (1)

Is grinding the upper steering shaft required? If so, which dremel attachment did you guys use? There isn't a whole lot of space in there...

MC87SS

iTrader: (33)

Just a small notch is required.
A small file, dremel stone or cutoff wheel will do the trick.