[CA] TPI motor, LS1 motor, TPI/auto harness, LS1 Fbody-M6 wiring harness
#1
Member
Thread Starter
Join Date: Sep 2004
Location: Bay Area California
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
Car: '88 trans am GTA
Engine: 5.7L 355 TPI L98
Transmission: T5
Axle/Gears: eaton posi 3.73 gears
TPI motor, LS1 motor, TPI/auto harness, LS1 Fbody-M6 wiring harness
mildly-built 350 TPI takeout of my 88 GTA? Need to make room in garage to complete my LS3/T56 swap.
350 TPI:
bored 0.030 over (355)
Edelbrock Performer 6085 Alum heads - Stage 1 ported and flowed by TPIs (have papers from when ported and flowed),
TPIs ZZ9 hydraulic roller cam by Crane - GRIND#SB-ZZ-9-HR12
1.5/1.6 roller rockers + springs by Comp
10.5~ compression.
Forged Pistons w/ moly rings
Unported SLP runners. (on motor)
TPIS large tube aluminum runners (off motor, vaccuum leak)
52mm TB.
TPIS Ported Plenum 52mm.
tpi base, top and large tube runners [have vacuum leak] are powder coated.
Adjustable fuel pressure regulator.
MSD coil,
MSD distrib,
Accell 10mm wires.
Air delete.
March Alum Underdrive pullies.
Edelbrock carb eo shorties [powdercoated - need recoated].
MAF [descreened and gutted]
Moroso Oil pan
Edelbrock Water Pump
maybe more to list...
Have receipts for every part listed here from the day it was purchased.
Will provide copies of documents to the buyer.
Also have other stuff avail:
- full T5 swap avail (1988 1352-176 WC trans, clutch, fw, bellhousing, pedals, Master/Slave) (88-96k on T5 - not behind 350 for more than 5-9k miles at max, 88k behind stock 305 when pulled) - $900 - SOLD
- LS1 Prev Owner claimed 40k on block, running when pulled [minus: ps pump, alt, water-pump, flywheel, coils] (has broken oilpan threads on block but doesn't leak oil - machine shop said $300 to repair) - $1500
- LS1 -m6 wiring harness - $400
- TPI harness and 165 ecu - multiple flashes inc stock. - $400
- logging/prom adapters/burning/reading gear from moates and and old pocket programmer. - $120 - SOLD
Everything has already been removed from car.
Will NOT part out the motor. You want to part it you buy it whole and part it out yourself.
Located in 94089
Serious offers please. PM here or Text 4O2-321-7388
edelbrock performer 6085 alum heads - TPIs stage 1
a couple of the parts on a recept and the zz9 cam specs
350 TPI:
bored 0.030 over (355)
Edelbrock Performer 6085 Alum heads - Stage 1 ported and flowed by TPIs (have papers from when ported and flowed),
TPIs ZZ9 hydraulic roller cam by Crane - GRIND#SB-ZZ-9-HR12
1.5/1.6 roller rockers + springs by Comp
10.5~ compression.
Forged Pistons w/ moly rings
Unported SLP runners. (on motor)
TPIS large tube aluminum runners (off motor, vaccuum leak)
52mm TB.
TPIS Ported Plenum 52mm.
tpi base, top and large tube runners [have vacuum leak] are powder coated.
Adjustable fuel pressure regulator.
MSD coil,
MSD distrib,
Accell 10mm wires.
Air delete.
March Alum Underdrive pullies.
Edelbrock carb eo shorties [powdercoated - need recoated].
MAF [descreened and gutted]
Moroso Oil pan
Edelbrock Water Pump
maybe more to list...
Have receipts for every part listed here from the day it was purchased.
Will provide copies of documents to the buyer.
Also have other stuff avail:
- full T5 swap avail (1988 1352-176 WC trans, clutch, fw, bellhousing, pedals, Master/Slave) (88-96k on T5 - not behind 350 for more than 5-9k miles at max, 88k behind stock 305 when pulled) - $900 - SOLD
- LS1 Prev Owner claimed 40k on block, running when pulled [minus: ps pump, alt, water-pump, flywheel, coils] (has broken oilpan threads on block but doesn't leak oil - machine shop said $300 to repair) - $1500
- LS1 -m6 wiring harness - $400
- TPI harness and 165 ecu - multiple flashes inc stock. - $400
- logging/prom adapters/burning/reading gear from moates and and old pocket programmer. - $120 - SOLD
Everything has already been removed from car.
Will NOT part out the motor. You want to part it you buy it whole and part it out yourself.
Located in 94089
Serious offers please. PM here or Text 4O2-321-7388
edelbrock performer 6085 alum heads - TPIs stage 1
a couple of the parts on a recept and the zz9 cam specs
Last edited by JayBoCC2; 05-03-2015 at 01:37 AM. Reason: Updated definitive block parts list based on receipts. updated sold.
#3
Member
Thread Starter
Join Date: Sep 2004
Location: Bay Area California
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
Car: '88 trans am GTA
Engine: 5.7L 355 TPI L98
Transmission: T5
Axle/Gears: eaton posi 3.73 gears
Re: TPI, T5 and LS1 swap combos, harness, prom gear
No, unmodified. I was gonna use this but I went with gmpp LS3 plugnplay control kit.
#4
Member
Thread Starter
Join Date: Sep 2004
Location: Bay Area California
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
Car: '88 trans am GTA
Engine: 5.7L 355 TPI L98
Transmission: T5
Axle/Gears: eaton posi 3.73 gears
Re: TPI, T5 and LS1 swap combos, harness, prom gear
list still up for sale.
open to reasonable offers.
open to reasonable offers.
#7
Junior Member
Join Date: Sep 2014
Location: Aurora, IL
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 Z28
Engine: 5.0 TPI
Transmission: 700r4
Axle/Gears: 2:73
Re: TPI, T5 and LS1 swap combos, harness, prom gear
Any suggestions on how to get the t5 setup to Chicago?
Trending Topics
#8
Member
Thread Starter
Join Date: Sep 2004
Location: Bay Area California
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
Car: '88 trans am GTA
Engine: 5.7L 355 TPI L98
Transmission: T5
Axle/Gears: eaton posi 3.73 gears
Re: TPI, T5 and LS1 swap combos, harness, prom gear
I used uship.com to ship my LS3 to me. Guy stuck it to a pallet and it was picked up at his shop and dropped by gate and pallet jack into my garage. Since i'm a house it'd have to be lift gate pickup but it was still not terribly expensive at estimated 420lbs weight, they even refunded me for the actual weight of the freight. My zip code is 94089
T5 only weighs about 75lbs. May get away with shipping it in a wooden crate. I can crate it or palletize it.
T5 only weighs about 75lbs. May get away with shipping it in a wooden crate. I can crate it or palletize it.
#9
Member
Thread Starter
Join Date: Sep 2004
Location: Bay Area California
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
Car: '88 trans am GTA
Engine: 5.7L 355 TPI L98
Transmission: T5
Axle/Gears: eaton posi 3.73 gears
Re: TPI, T5 and LS1 swap combos, harness, prom gear
Bump - Double checked tags on T5 and it is a WC unit.
#10
Junior Member
iTrader: (15)
Join Date: Jun 2010
Location: Shreveport, La
Posts: 44
Likes: 0
Received 5 Likes
on
4 Posts
Car: 1987 Iroc Z
Engine: 355 TPI Fully Built
Transmission: Borg Warner WC 5-Speed
Axle/Gears: Stock Posi Rearend
Re: TPI, T5 and LS1 swap combos, harness, prom gear
how much are you looking to get for your tpi engine (ballpark)?
#12
Member
Thread Starter
Join Date: Sep 2004
Location: Bay Area California
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
Car: '88 trans am GTA
Engine: 5.7L 355 TPI L98
Transmission: T5
Axle/Gears: eaton posi 3.73 gears
Re: TPI, T5 and LS1 swap combos, harness, prom gear
...
Last edited by JayBoCC2; 04-04-2015 at 11:06 PM.
#14
Member
Thread Starter
Join Date: Sep 2004
Location: Bay Area California
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
Car: '88 trans am GTA
Engine: 5.7L 355 TPI L98
Transmission: T5
Axle/Gears: eaton posi 3.73 gears
Re: TPI, T5 and LS1 swap combos, harness, prom gear
added pic of moates prom gear...
left is usb obd1 adapter and right is usb prom burner with ZIF socket.
left is usb obd1 adapter and right is usb prom burner with ZIF socket.
#17
Member
Thread Starter
Join Date: Sep 2004
Location: Bay Area California
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
Car: '88 trans am GTA
Engine: 5.7L 355 TPI L98
Transmission: T5
Axle/Gears: eaton posi 3.73 gears
Re: TPI, T5 and LS1 swap combos, harness, prom gear
bump ... went through my receipts and updated all the mods to the TPI motor.
#18
Member
Thread Starter
Join Date: Sep 2004
Location: Bay Area California
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
Car: '88 trans am GTA
Engine: 5.7L 355 TPI L98
Transmission: T5
Axle/Gears: eaton posi 3.73 gears
Re: TPI, T5 and LS1 swap combos, harness, prom gear
Moates.net Chip burner, obd1 pc adapter and piggy back adapter sold and shipped!
#19
Supreme Member
Re: TPI, T5 and LS1 swaps, TPI/auto harness, LS1 Fbody-M6 wiring harness
Is the T5 still available?
#20
Member
Thread Starter
Join Date: Sep 2004
Location: Bay Area California
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
Car: '88 trans am GTA
Engine: 5.7L 355 TPI L98
Transmission: T5
Axle/Gears: eaton posi 3.73 gears
Re: TPI, T5 and LS1 swaps, TPI/auto harness, LS1 Fbody-M6 wiring harness
Yes, but i will not part, if you were the one looking to buy just the clutch.
#21
Supreme Member
#23
Member
Thread Starter
Join Date: Sep 2004
Location: Bay Area California
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
Car: '88 trans am GTA
Engine: 5.7L 355 TPI L98
Transmission: T5
Axle/Gears: eaton posi 3.73 gears
Re: TPI, T5 and LS1 swaps, TPI/auto harness, LS1 Fbody-M6 wiring harness
What?
#25
Member
Thread Starter
Join Date: Sep 2004
Location: Bay Area California
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
Car: '88 trans am GTA
Engine: 5.7L 355 TPI L98
Transmission: T5
Axle/Gears: eaton posi 3.73 gears
Re: TPI, T5 and LS1 swaps, TPI/auto harness, LS1 Fbody-M6 wiring harness
No, the price is just for the LS1. I'm using the T56 with my LS3.
#26
Member
Thread Starter
Join Date: Sep 2004
Location: Bay Area California
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
Car: '88 trans am GTA
Engine: 5.7L 355 TPI L98
Transmission: T5
Axle/Gears: eaton posi 3.73 gears
Re: TPI, T5 and LS1 swaps, TPI/auto harness, LS1 Fbody-M6 wiring harness
T5 sale pending payment and shipment.
#27
Member
Thread Starter
Join Date: Sep 2004
Location: Bay Area California
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
Car: '88 trans am GTA
Engine: 5.7L 355 TPI L98
Transmission: T5
Axle/Gears: eaton posi 3.73 gears
Re: TPI motor, LS1 motor, TPI/auto harness, LS1 Fbody-M6 wiring harness
T5 sold and shipped.
#29
Member
Thread Starter
Join Date: Sep 2004
Location: Bay Area California
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
Car: '88 trans am GTA
Engine: 5.7L 355 TPI L98
Transmission: T5
Axle/Gears: eaton posi 3.73 gears
Re: TPI motor, LS1 motor, TPI/auto harness, LS1 Fbody-M6 wiring harness
Make me a reasonable offer. Needs rebuild and want it to go to a good home.
Thread
Thread Starter
Forum
Replies
Last Post
Sanjay
Engine/Drivetrain/Suspension Parts for Sale
1
08-12-2015 03:41 PM