[FL] edelbrock rpm performer cam lifters and springs forsale.
#1
Member
Thread Starter
Join Date: Jul 2014
Location: florida
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 iroc
Engine: 350
Transmission: t5
Axle/Gears: 323
edelbrock rpm performer cam lifters and springs forsale.
Up for sale is a barely very barely used edelbrock rpm performer cam for a 350 small block. I bought a motor from a friend of my dad's and he had just installed this cam in it (Didn't even give the cam time to set) before decided to go with a bigger motor told me if I wanted to run the cam I would have to get the matching springs etc. Since the motor has been in my possession it has not been rand we tore it down to paint it black and add more chrome then my pocket book cares to talk about and do some head work and bump the compression up by running thinner head gaskets. In that time I decided I wanted to get a little more power out of the motor and decided to go with a comp thumper cam instead. So that leaves me with this. The springs are brand new and were never actually installed I can provide a receipt from orileys if you wish just let me know because Ill have to go there and have another one printed up. I am including everything you see in the picture If you were to buy all of these parts together without shipping it would be around 270$ brand new given that the cam as a installed I figure about 175 is a fair deal for this whole bolt on and go setup. If your interested please pm me. The cam it self is for a small block chevy 305/327/350etc. If you would like more info please just let me know thanks. I will ship at buyers expense but no international shipping unless you want to pay international charges.
#2
Member
iTrader: (7)
Join Date: Jan 2013
Location: Right here in front of you
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Iroc T-top
Engine: 350 w/typical bolt-ons
Transmission: 5 speed
Axle/Gears: 3.42 zexel, TEN chromoly 28 splines
Re: edelbrock rpm performer cam lifters and springs forsale.
Would you sell just the spring set?
#3
Member
Thread Starter
Join Date: Jul 2014
Location: florida
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 iroc
Engine: 350
Transmission: t5
Axle/Gears: 323
Re: edelbrock rpm performer cam lifters and springs forsale.
Not the springs are matched to the cam and I would prefer to keep it as a whole aet
#4
Member
iTrader: (7)
Join Date: Jan 2013
Location: Right here in front of you
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Iroc T-top
Engine: 350 w/typical bolt-ons
Transmission: 5 speed
Axle/Gears: 3.42 zexel, TEN chromoly 28 splines
Re: edelbrock rpm performer cam lifters and springs forsale.
That's cool. If you change your mind, or they don't sell, let me know.
I have the same cam & lifters, with just "Z28" springs. They work, but would like to get the ones Edelbrock recommend someday.
I have the same cam & lifters, with just "Z28" springs. They work, but would like to get the ones Edelbrock recommend someday.
Thread
Thread Starter
Forum
Replies
Last Post
ambainb
Camaros for Sale
11
04-25-2016 09:21 PM