[CA] Brand New ZZ4 Take Out Camshaft, Rockers, Valve Springs and Pushrods
#1
Brand New ZZ4 Take Out Camshaft, Rockers, Valve Springs and Pushrods
Hey Folks,
I have a basically new ZZ4 take out Camshaft, Rockers, Valve Springs and Pushrods from my ZZ4 turn key GM Performance Parts Crate Motor. The motor was installed into my car and run for about 2-3 hours. I decided I wanted a more aggressive idle, so I changed out the cam, rockers, valve springs and Pushrods from my ZZ4 to some of Comp Cams finest products
Cam Specs:
GM Part Number: 10185071 (zz4)
Hydraulic Roller Camshaft Small Block Chevy
350 5.7L ZZ3/ZZ4 HO
Lift: .474'' Int. / .501'' Exh.
Duration: 275° Int / 280° Exh. @ .050'' Lift
112° Lobe Centerline
Rocker arm specs: (zz4)
GM Part Number: 10089648 (x8)
1.5 Ratio
Fits 3/8 in. Stud
SBC 5.0/5.7L
Pushrods and valve springs= zz4
Looking to sell as a complete package. Open to selling parts individually though. Shoot me REASONABLE offers!
Shawn
310-279-6974
I have a basically new ZZ4 take out Camshaft, Rockers, Valve Springs and Pushrods from my ZZ4 turn key GM Performance Parts Crate Motor. The motor was installed into my car and run for about 2-3 hours. I decided I wanted a more aggressive idle, so I changed out the cam, rockers, valve springs and Pushrods from my ZZ4 to some of Comp Cams finest products
Cam Specs:
GM Part Number: 10185071 (zz4)
Hydraulic Roller Camshaft Small Block Chevy
350 5.7L ZZ3/ZZ4 HO
Lift: .474'' Int. / .501'' Exh.
Duration: 275° Int / 280° Exh. @ .050'' Lift
112° Lobe Centerline
Rocker arm specs: (zz4)
GM Part Number: 10089648 (x8)
1.5 Ratio
Fits 3/8 in. Stud
SBC 5.0/5.7L
Pushrods and valve springs= zz4
Looking to sell as a complete package. Open to selling parts individually though. Shoot me REASONABLE offers!
Shawn
310-279-6974
#2
TGO Supporter/Moderator
iTrader: (12)
Join Date: Jul 1999
Location: SALEM, NH
Posts: 11,720
Likes: 0
Received 89 Likes
on
75 Posts
Car: '88 Formula, '94 Corvette, '95 Bird
Engine: LC9, 355" LT1, LT1
Transmission: T5, Zf6, 4L60E
Axle/Gears: 3.42, Dana44 3.45, 3.23
Re: Brand New ZZ4 Take Out Camshaft, Rockers, Valve Springs and Pushrods
Hey Folks,
I have a basically new ZZ4 take out Camshaft, Rockers, Valve Springs and Pushrods from my ZZ4 turn key GM Performance Parts Crate Motor. The motor was installed into my car and run for about 2-3 hours. I decided I wanted a more aggressive idle, so I changed out the cam, rockers, valve springs and Pushrods from my ZZ4 to some of Comp Cams finest products
Cam Specs:
GM Part Number: 10185071 (zz4)
Hydraulic Roller Camshaft Small Block Chevy
350 5.7L ZZ3/ZZ4 HO
Lift: .474'' Int. / .501'' Exh.
Duration: 275° Int / 280° Exh. @ .050'' Lift
112° Lobe Centerline
Rocker arm specs: (zz4)
GM Part Number: 10089648 (x8)
1.5 Ratio
Fits 3/8 in. Stud
SBC 5.0/5.7L
Pushrods and valve springs= zz4
Looking to sell as a complete package. Open to selling parts individually though. Shoot me REASONABLE offers!
Shawn
310-279-6974
I have a basically new ZZ4 take out Camshaft, Rockers, Valve Springs and Pushrods from my ZZ4 turn key GM Performance Parts Crate Motor. The motor was installed into my car and run for about 2-3 hours. I decided I wanted a more aggressive idle, so I changed out the cam, rockers, valve springs and Pushrods from my ZZ4 to some of Comp Cams finest products
Cam Specs:
GM Part Number: 10185071 (zz4)
Hydraulic Roller Camshaft Small Block Chevy
350 5.7L ZZ3/ZZ4 HO
Lift: .474'' Int. / .501'' Exh.
Duration: 275° Int / 280° Exh. @ .050'' Lift
112° Lobe Centerline
Rocker arm specs: (zz4)
GM Part Number: 10089648 (x8)
1.5 Ratio
Fits 3/8 in. Stud
SBC 5.0/5.7L
Pushrods and valve springs= zz4
Looking to sell as a complete package. Open to selling parts individually though. Shoot me REASONABLE offers!
Shawn
310-279-6974
What are you asking for it all? I already bought a cam, but if the price is right I'll take it all.
-- Joe
#4
Junior Member
iTrader: (3)
Join Date: Oct 2012
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Car: 77 Y82
Engine: W72
Transmission: Super T-10
Axle/Gears: 3.23
Re: Brand New ZZ4 Take Out Camshaft, Rockers, Valve Springs and Pushrods
What do you want for it,all together or individual?You'll get more interest with an idea of what you want.
Thread
Thread Starter
Forum
Replies
Last Post
ambainb
Camaros for Sale
11
04-25-2016 09:21 PM
1988iroc350tpi
Tech / General Engine
8
08-14-2015 07:52 PM