T5/T56 parts
#1
Junior Member
Thread Starter
Join Date: Oct 2015
Location: Nappanee, Indiana
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Trans Am
Engine: .040 over 327, aluminium heads
Transmission: T56
Axle/Gears: 4:56s auburn posi, mosers
T5/T56 parts
2PC main SBC T5 flywheel; $40+ shipping
RAM T5 Clutch, RAM-92730 maybe around 3k miles; $65 + shipping
LT1 T56 Flywheel, I don't know much about it, It came with a T56 that I swapped against a 2PC main sbc. It looks to be in decent shape; $40 + shipping
LT1 T56 pressure plate and clutch disc, Same story as the flywheel, They also look to be in decent shape. $50 + shipping
RAM T5 Clutch, RAM-92730 maybe around 3k miles; $65 + shipping
LT1 T56 Flywheel, I don't know much about it, It came with a T56 that I swapped against a 2PC main sbc. It looks to be in decent shape; $40 + shipping
LT1 T56 pressure plate and clutch disc, Same story as the flywheel, They also look to be in decent shape. $50 + shipping
Last edited by 84TA327; 05-13-2016 at 12:07 PM.
#4
Member
iTrader: (7)
Join Date: Dec 2007
Location: Springboro, Pa.
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Monte Carlo SS
Engine: Vortec headed 350
Transmission: '89 WC T5
Axle/Gears: 3.73
Re: T5/T56 parts
Are you saying that the LT1 T56 flywheel you have for sale is the one needed for a 2pc RMS engine(?) or that it is the stock LT1 T56 flywheel that you have that you don't/didn't need since you are installing it behind a 2pc RMS engine? Sorry if this seems like a dumb question but I am confused. Thanks.
#5
Junior Member
Thread Starter
Join Date: Oct 2015
Location: Nappanee, Indiana
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Trans Am
Engine: .040 over 327, aluminium heads
Transmission: T56
Axle/Gears: 4:56s auburn posi, mosers
Re: T5/T56 parts
Are you saying that the LT1 T56 flywheel you have for sale is the one needed for a 2pc RMS engine(?) or that it is the stock LT1 T56 flywheel that you have that you don't/didn't need since you are installing it behind a 2pc RMS engine? Sorry if this seems like a dumb question but I am confused. Thanks.
It's the factory lt1 t56 flywheel. Sorry for the confusion, it came with the tranny and I couldn't use it.
Trending Topics
#12
Senior Member
iTrader: (5)
Join Date: Feb 2005
Location: meridian, idaho
Posts: 691
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 1500p\u 2wd
Engine: 91 z28 tpi 355
Transmission: 91 700r4
Re: T5/T56 parts
Im interested in the t5 clutch. Everything ok with it....ever have balance issues that I have read about with these? How much power should this clutch hold? I have a 1970 camaro t5 350 and I'm looking at doing a head/cam swap....worried I need to do some t5upgrades
#13
Junior Member
Thread Starter
Join Date: Oct 2015
Location: Nappanee, Indiana
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Trans Am
Engine: .040 over 327, aluminium heads
Transmission: T56
Axle/Gears: 4:56s auburn posi, mosers
Re: T5/T56 parts
This is the clutch, https://m.summitracing.com/parts/ram-92730
I didn't have very many miles on the clutch or flywheel, but I never had any balance issues. The flywheel is for a 2pc main, just to be clear.
I didn't have very many miles on the clutch or flywheel, but I never had any balance issues. The flywheel is for a 2pc main, just to be clear.
#16
Junior Member
Thread Starter
Join Date: Oct 2015
Location: Nappanee, Indiana
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Trans Am
Engine: .040 over 327, aluminium heads
Transmission: T56
Axle/Gears: 4:56s auburn posi, mosers
Re: T5/T56 parts
Make me an offer
#19
Senior Member
iTrader: (17)
Join Date: Mar 2002
Location: Rincon, Ga.
Posts: 854
Likes: 0
Received 8 Likes
on
6 Posts
Car: 91 Camaro RS
Engine: 305 TPI conversion.
Transmission: T56
Axle/Gears: 3.73 posi 4th gen rear
Re: T5/T56 parts
Can you pm me or email me the pics of the t56 clutch flywheel and pressure plate? I am interested in those
#20
Junior Member
Thread Starter
Join Date: Oct 2015
Location: Nappanee, Indiana
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Trans Am
Engine: .040 over 327, aluminium heads
Transmission: T56
Axle/Gears: 4:56s auburn posi, mosers
Re: T5/T56 parts
Yes, I will be able to get more pics tonight. I'm at work now, so I won't be until later tonight, if that's OK.
#21
#22
Junior Member
Thread Starter
Join Date: Oct 2015
Location: Nappanee, Indiana
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Trans Am
Engine: .040 over 327, aluminium heads
Transmission: T56
Axle/Gears: 4:56s auburn posi, mosers
Re: T5/T56 parts
T56 pressure plate and clutch disc; sold
Thread
Thread Starter
Forum
Replies
Last Post
KrazedZ
Engine/Drivetrain/Suspension Parts for Sale
1
02-11-2012 02:16 PM
Jeff91RS
Engine/Drivetrain/Suspension Wanted
4
04-15-2009 01:15 AM
calebzman
Engine/Drivetrain/Suspension Parts for Sale
2
05-20-2008 07:22 PM