[NJ] suspension goodies, all the good stuff you've always wanted

Thread Tools
 
Search this Thread
 
Old 11-27-2016, 05:03 PM
  #1  
Supreme Member

Thread Starter
iTrader: (14)
 
//<86TA>\\'s Avatar
 
Join Date: Aug 2006
Location: Central NJ
Posts: 12,650
Likes: 0
Received 44 Likes on 42 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
suspension goodies, all the good stuff you've always wanted

Parting out my 92 project.
all parts have under 5k miles on them, parts are all in good shape but are used. I will clean them as best i can before shipping.

-UMI strut mounts, built 3/4" taller than their normal offering. $175 shipped
**may not clear the master cylinder without shimming the booster**


[/B]
-Modified 92 'x' heavy spindles, Kore3 billet 7071 hubs with long 1/2-20 screw in studs, billet dust cap, solid bearing spacers, steering relocation brackets. Steering brackets clear 18" wheels with as much backspacing as you can fit on the car, dont know about anything else, never ran a different setup. Hubs are 1le spec +.25". long aluminum tie rod adjuster sleeves and outer rod ends, bump stop adjustable $600 shipped.

might have more as i get parts off.

-I have a set of 4, 18x10.5 apex arc-8 wheels and 295-35 tires too, direct fit on the front with my hubs, rear needs a 10mm spacer. wheels are drilled to the proper bolt pattern and weight 19.5lbs each. ask if interested, wheels are $341 each new and tires were almost 300$ each. Make reasonable offer.



car in its glory




all shipping is included in the price, paypal or cash in person only. Shipping only to the lower 48. Can ship elsewhere, but buyer pays actual shipping.

any questions, message me here or if local text call
Phil
9082689201

Last edited by //<86TA>\\; 01-17-2017 at 07:53 PM.
Old 11-27-2016, 07:03 PM
  #2  
Supreme Member

iTrader: (10)
 
blacksunshine'91's Avatar
 
Join Date: Sep 2000
Location: Moorpark, CA
Posts: 2,376
Likes: 0
Received 138 Likes on 98 Posts
Car: '91 GTA, '92 T/A Convertible
Engine: GTA: 350 w/Vortec heads, T/A: 305
Transmission: Pro-built 700R4
Axle/Gears: GTA: 3.27, T/A: 2.73
Re: suspension goodies, all the good stuff you've always wanted

Are you parting out the whole car, or just specific parts?
Old 11-27-2016, 07:30 PM
  #3  
Supreme Member

Thread Starter
iTrader: (14)
 
//<86TA>\\'s Avatar
 
Join Date: Aug 2006
Location: Central NJ
Posts: 12,650
Likes: 0
Received 44 Likes on 42 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: suspension goodies, all the good stuff you've always wanted

Putting it mostly back to stock, then car will be sold as a whole.
Old 11-28-2016, 02:07 PM
  #4  
Supreme Member

Thread Starter
iTrader: (14)
 
//<86TA>\\'s Avatar
 
Join Date: Aug 2006
Location: Central NJ
Posts: 12,650
Likes: 0
Received 44 Likes on 42 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: suspension goodies, all the good stuff you've always wanted

Konis are sold...
Old 11-29-2016, 12:01 PM
  #5  
Senior Member

iTrader: (39)
 
Ed1LE's Avatar
 
Join Date: Feb 2001
Location: Westminster, MD USA
Posts: 746
Received 18 Likes on 14 Posts
Car: 91 Firebird 'vert, 91 Formula
Engine: 5.7, 5.0
Transmission: T56, T5
Axle/Gears: Auburn w/ 3.73's, 3.42
Re: suspension goodies, all the good stuff you've always wanted

Can you provide more info on these that are listed in the sale thread for the car:
-Adjustable upper wonder bar/steering box brace
-Adjustable lower chassis brace under firewall

Are these being sold as well or can you provide details about them? Thx!
Old 11-29-2016, 01:25 PM
  #6  
Junior Member
 
dahuntin's Avatar
 
Join Date: Apr 2016
Location: Hampton Roads, VA
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Car: 89 Camaro
Engine: 385
Transmission: '94 T-56
Axle/Gears: Broken 10 Bolt
Re: suspension goodies, all the good stuff you've always wanted

Could you tell us more about the first picture? It looks like you've fabricated a NASCAR style sway bar into a a Watts link that goes mounts where the normal panhard bar would go...
Old 11-29-2016, 03:22 PM
  #7  
Supreme Member

Thread Starter
iTrader: (14)
 
//<86TA>\\'s Avatar
 
Join Date: Aug 2006
Location: Central NJ
Posts: 12,650
Likes: 0
Received 44 Likes on 42 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: suspension goodies, all the good stuff you've always wanted

Originally Posted by Ed1LE
Can you provide more info on these that are listed in the sale thread for the car:
-Adjustable upper wonder bar/steering box brace
-Adjustable lower chassis brace under firewall

Are these being sold as well or can you provide details about them? Thx!
Both parts are prototypes and not for sale currently
Old 11-29-2016, 03:24 PM
  #8  
Supreme Member

Thread Starter
iTrader: (14)
 
//<86TA>\\'s Avatar
 
Join Date: Aug 2006
Location: Central NJ
Posts: 12,650
Likes: 0
Received 44 Likes on 42 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: suspension goodies, all the good stuff you've always wanted

Originally Posted by dahuntin
Could you tell us more about the first picture? It looks like you've fabricated a NASCAR style sway bar into a a Watts link that goes mounts where the normal panhard bar would go...
Pretty much yes. However its a mumford link not a watts link. There is a thread on here, I think in fab, where I started it. That's the 2nd version un the picture, the 3rd version is still on my bench.
Old 12-02-2016, 05:45 PM
  #9  
Junior Member
iTrader: (1)
 
Rezorector's Avatar
 
Join Date: Nov 2016
Location: Charlotte NC
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Car: 1988 Camaro IROC Z
Engine: 350 TPI
Transmission: 700r4
Re: suspension goodies, all the good stuff you've always wanted

The Koni yellows came in, they look great. Good seller!
Old 12-02-2016, 10:12 PM
  #10  
Supreme Member

Thread Starter
iTrader: (14)
 
//<86TA>\\'s Avatar
 
Join Date: Aug 2006
Location: Central NJ
Posts: 12,650
Likes: 0
Received 44 Likes on 42 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: suspension goodies, all the good stuff you've always wanted

Wonder bar sold

Last edited by //<86TA>\\; 12-02-2016 at 10:17 PM.
Old 12-03-2016, 06:40 AM
  #11  
Junior Member
iTrader: (2)
 
Steve Quinn's Avatar
 
Join Date: Aug 2014
Location: Clawson, Michigan
Posts: 30
Likes: 0
Received 1 Like on 1 Post
Car: 1990 Camaro IROCZ
Engine: 305
Transmission: T5
Axle/Gears: 3.45
Re: suspension goodies, all the good stuff you've always wanted

What did you think of UMI rotojoint?
Old 12-03-2016, 08:17 AM
  #12  
Supreme Member

Thread Starter
iTrader: (14)
 
//<86TA>\\'s Avatar
 
Join Date: Aug 2006
Location: Central NJ
Posts: 12,650
Likes: 0
Received 44 Likes on 42 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: suspension goodies, all the good stuff you've always wanted

Originally Posted by Steve Quinn
What did you think of UMI rotojoint?
A very good functioning part. Quite, free moving and smooth.
Old 12-05-2016, 07:06 PM
  #13  
Supreme Member

Thread Starter
iTrader: (14)
 
//<86TA>\\'s Avatar
 
Join Date: Aug 2006
Location: Central NJ
Posts: 12,650
Likes: 0
Received 44 Likes on 42 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: suspension goodies, all the good stuff you've always wanted

Bump
Old 12-06-2016, 06:44 PM
  #14  
Supreme Member

Thread Starter
iTrader: (14)
 
//<86TA>\\'s Avatar
 
Join Date: Aug 2006
Location: Central NJ
Posts: 12,650
Likes: 0
Received 44 Likes on 42 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: suspension goodies, all the good stuff you've always wanted

Sway bar sold
Old 12-12-2016, 06:26 AM
  #15  
Supreme Member

Thread Starter
iTrader: (14)
 
//<86TA>\\'s Avatar
 
Join Date: Aug 2006
Location: Central NJ
Posts: 12,650
Likes: 0
Received 44 Likes on 42 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: suspension goodies, all the good stuff you've always wanted

Monday morning bump
Old 12-15-2016, 06:44 AM
  #16  
Junior Member
iTrader: (2)
 
Steve Quinn's Avatar
 
Join Date: Aug 2014
Location: Clawson, Michigan
Posts: 30
Likes: 0
Received 1 Like on 1 Post
Car: 1990 Camaro IROCZ
Engine: 305
Transmission: T5
Axle/Gears: 3.45
Re: suspension goodies, all the good stuff you've always wanted

On the rotojoint rear control arms are they chrome moly, how heavy are they? Do they come with the spannner wrench?
Old 12-15-2016, 02:14 PM
  #17  
Supreme Member

Thread Starter
iTrader: (14)
 
//<86TA>\\'s Avatar
 
Join Date: Aug 2006
Location: Central NJ
Posts: 12,650
Likes: 0
Received 44 Likes on 42 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: suspension goodies, all the good stuff you've always wanted

They are chromoloy and there is no spanner wrench to come with them. They don't come with one from UMI, but I believe they are available from them. They are still tight.

I can weight one when I get home, probably 2.5lbs each I would guess?
Old 12-17-2016, 09:08 AM
  #18  
Supreme Member

Thread Starter
iTrader: (14)
 
//<86TA>\\'s Avatar
 
Join Date: Aug 2006
Location: Central NJ
Posts: 12,650
Likes: 0
Received 44 Likes on 42 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: suspension goodies, all the good stuff you've always wanted

Rear control arms sold!!!
Old 01-01-2017, 11:26 AM
  #19  
Supreme Member

Thread Starter
iTrader: (14)
 
//<86TA>\\'s Avatar
 
Join Date: Aug 2006
Location: Central NJ
Posts: 12,650
Likes: 0
Received 44 Likes on 42 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: suspension goodies, all the good stuff you've always wanted

New years bump.

Strut mounts, a arms and spindles hubs are still available.
Old 01-17-2017, 07:54 PM
  #20  
Supreme Member

Thread Starter
iTrader: (14)
 
//<86TA>\\'s Avatar
 
Join Date: Aug 2006
Location: Central NJ
Posts: 12,650
Likes: 0
Received 44 Likes on 42 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: suspension goodies, all the good stuff you've always wanted

A arms are sold
Old 01-17-2017, 09:09 PM
  #21  
Junior Member
 
Ben Thomson's Avatar
 
Join Date: Aug 2016
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Car: 1992 Camaro RS 25th Anniversary
Engine: 305 TBI
Re: suspension goodies, all the good stuff you've always wanted

Interested in the hubs. Can you post pics? How much?




All times are GMT -5. The time now is 10:35 AM.