Passenger Side Exhaust Spacer/Damper NEEDED!
10-13-2011, 04:03 AM
#1
Member
Thread Starter
Join Date: Jul 2008
Location: Millstone Township, NJ
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
Car: '90 IROC Convertible
Engine: 305 TPI LB9
Transmission: 700R4
Axle/Gears: 3.23 Disc Brake LSD
Passenger Side Exhaust Spacer/Damper NEEDED!
I have a '90 IROC and putting a nice 3" CAT & Hooker CAT Back system on it. Changing over the Y-Pipe to the MagnaFlow 16450 with a 3" output pipe to the CAT.
The MagnaFlow Y-Pipe needs to have the Exhaust Spacer in place and for some reason my '90 IROC 305 TPI setup has no spacer or damper between the exhaust manifold and stock Y-Pipe, so I need the spacer to make this work.
From what I have seen, I am looking for part number 10113080 ('90-'92) or 5234327 ('89).
Attached is a picture of the spacer I am looking for. Anyone have one?
The MagnaFlow Y-Pipe needs to have the Exhaust Spacer in place and for some reason my '90 IROC 305 TPI setup has no spacer or damper between the exhaust manifold and stock Y-Pipe, so I need the spacer to make this work.
From what I have seen, I am looking for part number 10113080 ('90-'92) or 5234327 ('89).
Attached is a picture of the spacer I am looking for. Anyone have one?
11-14-2011, 12:39 PM
#2
05-09-2015, 11:11 AM
#3
Junior Member
Join Date: Apr 2015
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Re: Passenger Side Exhaust Spacer/Damper NEEDED!
Apologies in advance if it's considered rude to bring such an old thread back to life BUT I'm looking for one of these spacers. Anyone got one? Please PM price with shipping to 90066 and I'll Paypal you!
05-09-2015, 11:52 AM
#4
Supreme Member
iTrader: (13)
Join Date: Dec 2002
Location: Bowdon, GA.
Posts: 2,535
Likes: 0
Received 16 Likes
on
14 Posts
Car: 1988 Camaro
Engine: 355, 10.34:1, 249/252 @.050", IK200
Transmission: TH-400, 3500 stall 9.5" converter
Axle/Gears: Ford 9", detroit locker, 3.89 gears
Re: Passenger Side Exhaust Spacer/Damper NEEDED!
Pricebill. I have the heat riser valve from a 1984 z28. 2 stud bolt pattern.
I'll take $25 plus shipping for it. I will get you the shipping quote later today when I can measure the box
I'll take $25 plus shipping for it. I will get you the shipping quote later today when I can measure the box
05-09-2015, 11:55 AM
#5
Junior Member
Join Date: Apr 2015
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Re: Passenger Side Exhaust Spacer/Damper NEEDED!
Thank you Night rider327 but I'm looking for the spacer that replaces this valve. I'm battling the smog referee here in California and they want this valve removed and replaced with an OEM spacer. It's a long, sad story.
05-09-2015, 12:56 PM
#6
Member
Re: Passenger Side Exhaust Spacer/Damper NEEDED!
I found a big donut gaskett at a swap meet to replace mine,I should have bought all he had,if you have a good medium duty truck parts place with a good old school parts guy he should be able to find one,I think the one I used he said came off a 1960's International Cornbinder one ton truck.
05-09-2015, 05:29 PM
#7
Member
iTrader: (6)
Join Date: Apr 2013
Posts: 385
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 ws6
Engine: Carb'd 334 stroker
Transmission: T5
I might have it. Removed the stock exhaust on 2 birds, I'll see if that spacer is one one of the stock pipes out back. If so, $10+ship
Trending Topics
05-14-2015, 08:52 AM
#8
Re: Passenger Side Exhaust Spacer/Damper NEEDED!
Thanx for checking with me Pricebill !
I don't have the TPI version of this spacer to offer you, but wanted to offer some advise....... If time is an important factor and you need a prompt resolution for your SMOG Referee than you can simply re-use the spacer that you already have.
If you cut the shaft & remove the internal flap you can simply weld the hole closed and re-install, giving you a non-EFE spacer.
Since your exhaust manifolds are the TPI version you WANT to also install the TPI spacer. (obviously; the Carb - or TBI - spacer is a restriction to the pass side TPI exhaust stream). But; If you've got to get it to pass a state test quickly,....... modifying the EFE spacer is an option.
I don't have the TPI version of this spacer to offer you, but wanted to offer some advise....... If time is an important factor and you need a prompt resolution for your SMOG Referee than you can simply re-use the spacer that you already have.
If you cut the shaft & remove the internal flap you can simply weld the hole closed and re-install, giving you a non-EFE spacer.
Since your exhaust manifolds are the TPI version you WANT to also install the TPI spacer. (obviously; the Carb - or TBI - spacer is a restriction to the pass side TPI exhaust stream). But; If you've got to get it to pass a state test quickly,....... modifying the EFE spacer is an option.
11-26-2015, 01:06 AM
#12
11-26-2015, 07:09 AM
#13
Want a title? Post!
Join Date: Nov 2015
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
11-27-2015, 11:51 AM
#15
Want a title? Post!
Join Date: Nov 2015
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
11-27-2015, 12:51 PM
#16
11-27-2015, 01:10 PM
#18
Want a title? Post!
Join Date: Nov 2015
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
11-27-2015, 01:13 PM
#19
Want a title? Post!
Join Date: Nov 2015
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
11-27-2015, 09:12 PM
#20
Supreme Member
iTrader: (13)
Join Date: Dec 2002
Location: Bowdon, GA.
Posts: 2,535
Likes: 0
Received 16 Likes
on
14 Posts
Car: 1988 Camaro
Engine: 355, 10.34:1, 249/252 @.050", IK200
Transmission: TH-400, 3500 stall 9.5" converter
Axle/Gears: Ford 9", detroit locker, 3.89 gears
Re: Passenger Side Exhaust Spacer/Damper NEEDED!
Shipping will be $11
Total $36
My paypal is nightrider355@gmail.com
Here are a couple of pictures of this one
Total $36
My paypal is nightrider355@gmail.com
Here are a couple of pictures of this one
Last edited by Night rider327; 11-27-2015 at 09:49 PM.
11-27-2015, 09:21 PM
#21
Want a title? Post!
Join Date: Nov 2015
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Re: Passenger Side Exhaust Spacer/Damper NEEDED!
Shipping will be $11
Total $36
My paypal is nightrider355@gmail.com
Here is a couple of pictures of this one
Total $36
My paypal is nightrider355@gmail.com
Here is a couple of pictures of this one
Noreen Wojahn
1977 Harrison St. Apt. 4
Neenah, WI 54956
That is my address again. Let me know when you ship it. And when you get your money.
11-28-2015, 12:57 AM
#22
Supreme Member
iTrader: (13)
Join Date: Dec 2002
Location: Bowdon, GA.
Posts: 2,535
Likes: 0
Received 16 Likes
on
14 Posts
Car: 1988 Camaro
Engine: 355, 10.34:1, 249/252 @.050", IK200
Transmission: TH-400, 3500 stall 9.5" converter
Axle/Gears: Ford 9", detroit locker, 3.89 gears
Re: Passenger Side Exhaust Spacer/Damper NEEDED!
Sorry I didn't see your question. It came off a '87 firebird LG4 305 4bbl carb'ed engine.
I received your payment and will try to ship your part out today (Sat, nov. 28) If I can get to the post office before they close. If not, it will be Mon. for sure.
I received your payment and will try to ship your part out today (Sat, nov. 28) If I can get to the post office before they close. If not, it will be Mon. for sure.
11-28-2015, 06:54 AM
#23
Want a title? Post!
Join Date: Nov 2015
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Re: Passenger Side Exhaust Spacer/Damper NEEDED!
Thank you very much. Well appreciated.
11-28-2015, 03:00 PM
#24
Supreme Member
iTrader: (13)
Join Date: Dec 2002
Location: Bowdon, GA.
Posts: 2,535
Likes: 0
Received 16 Likes
on
14 Posts
Car: 1988 Camaro
Engine: 355, 10.34:1, 249/252 @.050", IK200
Transmission: TH-400, 3500 stall 9.5" converter
Axle/Gears: Ford 9", detroit locker, 3.89 gears
Re: Passenger Side Exhaust Spacer/Damper NEEDED!
Thread
Thread Starter
Forum
Replies
Last Post
