Vette 350 or ? which one ?
02-05-2011, 08:57 PM
#1
Junior Member
Thread Starter
iTrader: (1)
Join Date: Oct 2004
Location: Danville, KY.
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 GTA, 75' Formula 400
Engine: 305 TPI, BB400
Transmission: Automatics in Both.
Axle/Gears: 2.73 in the GTA, soon to be 3.42
Vette 350 or ? which one ?
Hey everyone, i presently have a good running 305 TPI SD 96K miles in my 90 GTA.
I have been looking to swap to a 350 TPI. I can get a thirdgen camaro/firebird 350 TPI with about 70K miles ( MaF i think ) or i can go with a Vette 350 TPI SD with about 53K miles.
Both come with wiring harness and ECM.
The difference i know between the 2, is the Vette has aluminum heads, possably about 10 hp more, acessories placement.
where as the camaro/firebird 350 is a little closer to the 305 that would come out, As far as accessories placement and such.
Around a 300 diff in price.
Any suggestions?
Thanks! Any suggestions or info is greatly appreciated.
I have been looking to swap to a 350 TPI. I can get a thirdgen camaro/firebird 350 TPI with about 70K miles ( MaF i think ) or i can go with a Vette 350 TPI SD with about 53K miles.
Both come with wiring harness and ECM.
The difference i know between the 2, is the Vette has aluminum heads, possably about 10 hp more, acessories placement.
where as the camaro/firebird 350 is a little closer to the 305 that would come out, As far as accessories placement and such.
Around a 300 diff in price.
Any suggestions?
Thanks! Any suggestions or info is greatly appreciated.
02-05-2011, 10:30 PM
#2
Junior Member
Thread Starter
iTrader: (1)
Join Date: Oct 2004
Location: Danville, KY.
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 GTA, 75' Formula 400
Engine: 305 TPI, BB400
Transmission: Automatics in Both.
Axle/Gears: 2.73 in the GTA, soon to be 3.42
Re: Vette 350 or ? which one ?
Oh, i forgot, also the EGr on the Vette motor is plumbed differently. Its not mounted under the plenum on the manifold , its externally plumbed. Could always delete it on the ECM, if need be.
Thread
Thread Starter
Forum
Replies
Last Post
