FS: MECHAM / MSE Aero Spoiler
#1
Member
Thread Starter
iTrader: (7)
Join Date: Jul 2005
Location: St Joseph, MO
Posts: 246
Likes: 0
Received 0 Likes
on
0 Posts
FS: MECHAM / MSE Aero Spoiler
Hi fellow thirdgenners. I have a fiberglass reproduction of the Mecham Racing rear aero wing found on the 82-85 MSE Trans Am's. I purchased it last summer for my 91 Firebird, and shortly after that I bought a 4th Gen. I parked the 91 and it has sat since then and the spoiler is exactly like it was when I pulled it out of the box from Mecham.
I paid $450 for it + $200 shipping... I know. Well plans have changed and Im wanting the money to put into my LT1. It's much better and lighter than the originals, not to mention they are impossible to find! Not only will you save 50 bucks on the same part, but you wont have to pay that outrageous shipping price.
Asking $400 + shipping
EDIT: I also have a white one just like it, but it's cut into three pieces. So if any of you are decent at fiberglassing you can take it for $100 OBO. I just don't have the time to put it back together. Of course shipping wouldn't be that much because I could fit it in a smaller box.
I paid $450 for it + $200 shipping... I know. Well plans have changed and Im wanting the money to put into my LT1. It's much better and lighter than the originals, not to mention they are impossible to find! Not only will you save 50 bucks on the same part, but you wont have to pay that outrageous shipping price.
Asking $400 + shipping
EDIT: I also have a white one just like it, but it's cut into three pieces. So if any of you are decent at fiberglassing you can take it for $100 OBO. I just don't have the time to put it back together. Of course shipping wouldn't be that much because I could fit it in a smaller box.
Last edited by Spiers; 03-16-2008 at 06:17 PM.
Trending Topics
#8
Member
Re: FS: MECHAM / MSE Aero Spoiler
Youngs F-Body in Charlotte NC has them $450
look here> http://www.youngsfbody.com/inc/sdetail/51397
Sweet looking spoilers
look here> http://www.youngsfbody.com/inc/sdetail/51397
Sweet looking spoilers
#9
Banned
Join Date: Jan 2007
Location: NYTHIRDGEN
Posts: 1,088
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 T/A
Engine: PROCHARGED LB9
Transmission: FB BUILT 700r4 2200 stall
Axle/Gears: 10 BOLT EATON 3:73 POSI
Re: FS: MECHAM / MSE Aero Spoiler
macham is also still selling them. they started about a yr ago.
#10
Member
Thread Starter
iTrader: (7)
Join Date: Jul 2005
Location: St Joseph, MO
Posts: 246
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: MECHAM / MSE Aero Spoiler
Shipping to River Edge is about ~$128, so I would do $525 shipped.
Yes I am also including the gaskets that I made. Just squeeze a dab of RTV sealant on them and you'll be good to go.
And yes as I stated in my original post, Mecham is selling them... for $450 + $200 shipping. So here you have a new one for ~$125 less.
Thanks for all your interest!
Yes I am also including the gaskets that I made. Just squeeze a dab of RTV sealant on them and you'll be good to go.
And yes as I stated in my original post, Mecham is selling them... for $450 + $200 shipping. So here you have a new one for ~$125 less.
Thanks for all your interest!
Last edited by Spiers; 03-17-2008 at 11:28 PM.
#12
Member
Join Date: May 2006
Location: Lake of the Ozarks, Missouri
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Pontiac GTA Trans Am
Engine: Basic Stroked SBC..383
Transmission: PerformaBuilt 700R4 3000 Stall
Axle/Gears: Moser 9in. 3:70s
Re: FS: MECHAM / MSE Aero Spoiler
What do you want for it to go to Camdenton Missouri 65591. Let me know asap. Or Ill come and pick it up...
#14
Member
Join Date: May 2006
Location: Lake of the Ozarks, Missouri
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Pontiac GTA Trans Am
Engine: Basic Stroked SBC..383
Transmission: PerformaBuilt 700R4 3000 Stall
Axle/Gears: Moser 9in. 3:70s
Re: FS: MECHAM / MSE Aero Spoiler
How would it work with my orginal wrap around spoiler. The tabs are made onto the metal that run around the glass? Id really like to have it but Idk how to remove the tabs that I dont need???
#15
Member
Thread Starter
iTrader: (7)
Join Date: Jul 2005
Location: St Joseph, MO
Posts: 246
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: MECHAM / MSE Aero Spoiler
I have never dealt with the original wrap around spoiler but the Mecham wing does not attach to the back glass so it doesn't use the tabs. Also the bolt holes will not be the same so you will have to fill and redrill or get a base model rear decklid. But I am pretty sure the tabs are removable.
#16
Member
iTrader: (3)
Join Date: May 2002
Location: Huntington, Wv
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: MECHAM / MSE Aero Spoiler
I wish i would have seen the broken one sooner. I would have bought it for sure. I need a spoiler anyway because the factory wrap around ones are junk.
#17
Member
Thread Starter
iTrader: (7)
Join Date: Jul 2005
Location: St Joseph, MO
Posts: 246
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: MECHAM / MSE Aero Spoiler
Yep they are. I was going to put it back together myself but don't have the time to do the work. A guy in Europe bought it, since he could not get a full one shipped over there. Glad to help him out!
#18
Junior Member
iTrader: (1)
Join Date: Mar 2008
Location: Austria / EU
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 GTA vert, 89 GTA T-Top, 84 TA
Engine: 383 vert, 350 GTA, 305 84TA
Transmission: automatic
Re: FS: MECHAM / MSE Aero Spoiler
Yeah, I am glad you gave me the chance to own this wing. Shipping charges to Europe are freakin high due to the size. Thanks again!
Martin
Martin
#20
Member
Join Date: May 2006
Location: Lake of the Ozarks, Missouri
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Pontiac GTA Trans Am
Engine: Basic Stroked SBC..383
Transmission: PerformaBuilt 700R4 3000 Stall
Axle/Gears: Moser 9in. 3:70s
Re: FS: MECHAM / MSE Aero Spoiler
Hey bud you sold this allready didnt ya?
Thread
Thread Starter
Forum
Replies
Last Post