[MD] Fs/FT klearz tail lights
12-23-2013, 10:36 PM
#1
Supreme Member
Thread Starter
iTrader: (12)
Join Date: Aug 2005
Location: M.D
Posts: 1,923
Likes: 0
Received 2 Likes
on
1 Post
Car: 1987 Camaro
Engine: 350 hsr
Transmission: 700R4(blown)
Axle/Gears: 3:73
Fs/FT klearz tail lights
FOR SALE OR TRADE : klearz smoked/clear tail lights.
I am looking to sel/trade these for $225
~you have to assemble them your self
~ I will include a tube of clear silicon too.
feel free to ask questions, I can take more pictures, I never installed em.
http://www.klearz.com/camaro-guide.html install guide.
Parts I am looking for are :
http://www.samocoind.com/T56MODULE.html
2 35x12.50 x15 bgf km2 tire ( new )
I am looking to sel/trade these for $225
~you have to assemble them your self
~ I will include a tube of clear silicon too.
feel free to ask questions, I can take more pictures, I never installed em.
http://www.klearz.com/camaro-guide.html install guide.
Parts I am looking for are :
http://www.samocoind.com/T56MODULE.html
2 35x12.50 x15 bgf km2 tire ( new )
Last edited by toxik IROC; 08-09-2014 at 07:36 PM.
12-28-2013, 01:25 AM
#2
Member
iTrader: (8)
Join Date: Mar 2007
Location: Shreveport Louisianna Barksdale AFB
Posts: 342
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Camaro
Engine: forged 383 11:1
Transmission: T56 TDP STAGE 2
Axle/Gears: 99 ws6 3.42 posi rear
Re: Fs/FT klearz tail lights
GLWS not a bad deal. next month you still got it message me well talk
02-10-2014, 07:21 AM
#5
Supreme Member
Thread Starter
iTrader: (12)
Join Date: Aug 2005
Location: M.D
Posts: 1,923
Likes: 0
Received 2 Likes
on
1 Post
Car: 1987 Camaro
Engine: 350 hsr
Transmission: 700R4(blown)
Axle/Gears: 3:73
Re: Fs/FT klearz tail lights
A while ago a company made some lenses . For the tail lights for are cars since no one has made aftermarket ones . You use your housing and replace the lense with these .
I got all smoke but the reverse light .
It's tasteful, looks better than night shade or clear/black since the plastic is actually smoke than just a coating covering up amber and red .
So morning bump
I got all smoke but the reverse light .
It's tasteful, looks better than night shade or clear/black since the plastic is actually smoke than just a coating covering up amber and red .
So morning bump
02-12-2014, 01:35 PM
#7
Supreme Member
iTrader: (25)
Join Date: Feb 2006
Location: Manteca,California. Nor Cal.
Posts: 7,260
Likes: 0
Received 5 Likes
on
5 Posts
Car: SOLD IT. Mopar guy only now.
Engine: gone
Transmission: gone
Axle/Gears: gone
Re: Fs/FT klearz tail lights
what does assembly entail? I've never tore apart the tail light housings before.
Trending Topics
02-12-2014, 03:04 PM
#8
Supreme Member
Thread Starter
iTrader: (12)
Join Date: Aug 2005
Location: M.D
Posts: 1,923
Likes: 0
Received 2 Likes
on
1 Post
Car: 1987 Camaro
Engine: 350 hsr
Transmission: 700R4(blown)
Axle/Gears: 3:73
Re: Fs/FT klearz tail lights
as far as I know, Stick the tail lights in oven for a couple mins on 125 or so to loosen up the oem silicone/glue or use a heat gun
Then once youhave the old tail light apart I would clean the insides( clean/maybe paint depending how bad they are. clean the channles that the new lenses sit on good and then use the silicon to glue the newlights togetherand to the tail light. whipe off exess wait for it to dry/cure and then reinstall new tail lights .
After crack open a beer and stand back and enjoy em.
Then once youhave the old tail light apart I would clean the insides( clean/maybe paint depending how bad they are. clean the channles that the new lenses sit on good and then use the silicon to glue the newlights togetherand to the tail light. whipe off exess wait for it to dry/cure and then reinstall new tail lights .
After crack open a beer and stand back and enjoy em.
02-13-2014, 06:24 PM
#9
02-14-2014, 09:11 AM
#10
Supreme Member
Thread Starter
iTrader: (12)
Join Date: Aug 2005
Location: M.D
Posts: 1,923
Likes: 0
Received 2 Likes
on
1 Post
Car: 1987 Camaro
Engine: 350 hsr
Transmission: 700R4(blown)
Axle/Gears: 3:73
Re: Fs/FT klearz tail lights
I don't see why I mean you can to give it a red tint but the tail lights are smoke
02-14-2014, 12:29 PM
#11
Supreme Member
iTrader: (25)
Join Date: Feb 2006
Location: Manteca,California. Nor Cal.
Posts: 7,260
Likes: 0
Received 5 Likes
on
5 Posts
Car: SOLD IT. Mopar guy only now.
Engine: gone
Transmission: gone
Axle/Gears: gone
Re: Fs/FT klearz tail lights
okay what i guess i am saying is that our bulbs are white, your brakes and tails are supposed to be red. so if they dont have a red tint to them your rear lights would not be red. so do the lenses have red tint on them or no?
02-14-2014, 02:46 PM
#12
Supreme Member
Thread Starter
iTrader: (12)
Join Date: Aug 2005
Location: M.D
Posts: 1,923
Likes: 0
Received 2 Likes
on
1 Post
Car: 1987 Camaro
Engine: 350 hsr
Transmission: 700R4(blown)
Axle/Gears: 3:73
Re: Fs/FT klearz tail lights
The lenese are smoke with the clear reverse light.
There is no red in the tail light.
If you need a red bulb, get some red 2057's http://www.ebay.com/itm/like/380727436188?lpid=82
or if you like led's go with
https://digi-tails.com/1982-1992-che...l-light-panels
or
http://www.superbrightleds.com/cat/l...r,1157,21,195:
or use a sharpie.
There is no red in the tail light.
If you need a red bulb, get some red 2057's http://www.ebay.com/itm/like/380727436188?lpid=82
or if you like led's go with
https://digi-tails.com/1982-1992-che...l-light-panels
or
http://www.superbrightleds.com/cat/l...r,1157,21,195:
or use a sharpie.
02-14-2014, 06:14 PM
#14
02-15-2014, 01:24 AM
#16
Re: Fs/FT klearz tail lights
Assembly takes time but it's pretty easy. Just get a junkyard set of housings. Thats what I did. Got some junky tails of an 85 sport coupe or something. The lenses came off super easy, didnt even have to put them in the oven. They may seem warped as you try to install them, most of that is because the factory tails are warped and these are molded from factory tail lights. But with a heatgun you can get them pretty straight. I just used a hair dryer and they're way straighter than my factory tails. I used 1/4" pinstriping tape for the "Grid" but I'd use plastidip if I were to do it again. They made less than 100 of these.
Last edited by InfernalVortex; 02-15-2014 at 01:28 AM.
02-17-2014, 03:04 PM
#20
Supreme Member
iTrader: (25)
Join Date: Feb 2006
Location: Manteca,California. Nor Cal.
Posts: 7,260
Likes: 0
Received 5 Likes
on
5 Posts
Car: SOLD IT. Mopar guy only now.
Engine: gone
Transmission: gone
Axle/Gears: gone
Re: Fs/FT klearz tail lights
Assembly takes time but it's pretty easy. Just get a junkyard set of housings. Thats what I did. Got some junky tails of an 85 sport coupe or something. The lenses came off super easy, didnt even have to put them in the oven. They may seem warped as you try to install them, most of that is because the factory tails are warped and these are molded from factory tail lights. But with a heatgun you can get them pretty straight. I just used a hair dryer and they're way straighter than my factory tails. I used 1/4" pinstriping tape for the "Grid" but I'd use plastidip if I were to do it again. They made less than 100 of these.
02-28-2014, 11:24 AM
#30
Supreme Member
iTrader: (2)
Join Date: Feb 2005
Location: West Warwick RI, postal code: 02893
Posts: 4,337
Received 55 Likes
on
41 Posts
Car: Building LS3, T56 Z28
Engine: LS3
Transmission: T-56
Axle/Gears: Moser/ 4.11
Re: Fs/FT klearz tail lights
Can you lower the price a bit? If these were like $175 shipped to MA, I would buy them right now.
Current price just puts them out of reach in my eyes. If they were assembled, that would be a different story.
Current price just puts them out of reach in my eyes. If they were assembled, that would be a different story.
02-28-2014, 12:26 PM
#31
Supreme Member
Thread Starter
iTrader: (12)
Join Date: Aug 2005
Location: M.D
Posts: 1,923
Likes: 0
Received 2 Likes
on
1 Post
Car: 1987 Camaro
Engine: 350 hsr
Transmission: 700R4(blown)
Axle/Gears: 3:73
Re: Fs/FT klearz tail lights
Sorry budd, I will not take less than $225 + actual shipping.
I spent $277 on these. They are still brand new. They are nice and they do not make these anymore.
I spent $277 on these. They are still brand new. They are nice and they do not make these anymore.
02-28-2014, 01:38 PM
#32
Supreme Member
iTrader: (2)
Join Date: Feb 2005
Location: West Warwick RI, postal code: 02893
Posts: 4,337
Received 55 Likes
on
41 Posts
Car: Building LS3, T56 Z28
Engine: LS3
Transmission: T-56
Axle/Gears: Moser/ 4.11
Re: Fs/FT klearz tail lights
I understand, guess I just don't want them enough. Hope you find a buyer soon. If you ever want to unload them for a loss, to just get rid of them, PM me.
02-28-2014, 01:46 PM
#33
Supreme Member
Thread Starter
iTrader: (12)
Join Date: Aug 2005
Location: M.D
Posts: 1,923
Likes: 0
Received 2 Likes
on
1 Post
Car: 1987 Camaro
Engine: 350 hsr
Transmission: 700R4(blown)
Axle/Gears: 3:73
Re: Fs/FT klearz tail lights
These are not hard to assemble either, on the first post there is a link to the instructions.
03-02-2014, 03:40 PM
#35
Supreme Member
iTrader: (2)
Join Date: Feb 2005
Location: West Warwick RI, postal code: 02893
Posts: 4,337
Received 55 Likes
on
41 Posts
Car: Building LS3, T56 Z28
Engine: LS3
Transmission: T-56
Axle/Gears: Moser/ 4.11
Re: Fs/FT klearz tail lights
I have read the instructions already, not too bad. Wish these were still available new.
03-03-2014, 10:17 AM
#38
Supreme Member
iTrader: (2)
Join Date: Feb 2005
Location: West Warwick RI, postal code: 02893
Posts: 4,337
Received 55 Likes
on
41 Posts
Car: Building LS3, T56 Z28
Engine: LS3
Transmission: T-56
Axle/Gears: Moser/ 4.11
Re: Fs/FT klearz tail lights
My build is in its infancy, If I were further along and needed this as a final touch I am sure I would feel differently about the price.
Bump, maybe someone else out there is at that step.
Bump, maybe someone else out there is at that step.
03-03-2014, 10:45 AM
#39
03-05-2014, 05:46 PM
#41
Supreme Member
iTrader: (5)
Join Date: Aug 2006
Location: Cleveland, Ohio
Posts: 2,491
Likes: 0
Received 5 Likes
on
5 Posts
Car: 89' IROC-Z
Engine: LO3
Transmission: 700R4
Axle/Gears: 10-Bolt/2.73
Re: Fs/FT klearz tail lights
Dang Toxic. Lol. Free bump. I originated the order for these and still have mine as well, still uninstalled. Waiting for a new set of housings and to purchase my Spaghetti LED tail light kit for a completely new taillight setup.
Good luck man. I can't see getting rid of mine ever, even if they were to sit forever. I just like having that one part nobody can get anymore. Welp, good luck man. I'll throw word around my local area.
Good luck man. I can't see getting rid of mine ever, even if they were to sit forever. I just like having that one part nobody can get anymore. Welp, good luck man. I'll throw word around my local area.
03-05-2014, 09:39 PM
#42
Supreme Member
Thread Starter
iTrader: (12)
Join Date: Aug 2005
Location: M.D
Posts: 1,923
Likes: 0
Received 2 Likes
on
1 Post
Car: 1987 Camaro
Engine: 350 hsr
Transmission: 700R4(blown)
Axle/Gears: 3:73
Re: Fs/FT klearz tail lights
I like the tail lights a ton and hesitate every time I bump this thread.Between these and the spaggatti's the tail lights would be wicked awsome. evermore so since no one else has em.
I just want my car on the road and if I sell these then I can be one step closer my cars been down for a couple years now, I blew the 700r4 and then been buying stuff for a t56 swap.
Dude it's good to hear from you and see you are still around! How ya been?!
I just want my car on the road and if I sell these then I can be one step closer my cars been down for a couple years now, I blew the 700r4 and then been buying stuff for a t56 swap.
Dude it's good to hear from you and see you are still around! How ya been?!
03-13-2014, 11:24 AM
#47
Supreme Member
iTrader: (2)
Join Date: Feb 2005
Location: West Warwick RI, postal code: 02893
Posts: 4,337
Received 55 Likes
on
41 Posts
Car: Building LS3, T56 Z28
Engine: LS3
Transmission: T-56
Axle/Gears: Moser/ 4.11
Re: Fs/FT klearz tail lights
What would you be looking for in terms of a trade? I most likely don't have what you want, but thought I would ask.
03-13-2014, 04:14 PM
#48
Supreme Member
Thread Starter
iTrader: (12)
Join Date: Aug 2005
Location: M.D
Posts: 1,923
Likes: 0
Received 2 Likes
on
1 Post
Car: 1987 Camaro
Engine: 350 hsr
Transmission: 700R4(blown)
Axle/Gears: 3:73
Re: Fs/FT klearz tail lights
Parts I am looking for :
http://www.samocoind.com/T56MODULE.html
http://www.dakotadigital.com/index.c...rod/prd886.htm
Flywheel bolts ARP-200-2807
Pressure plate bolts ARP-134-2202
Bell to trans studs ARP-245-0901
http://www.momousa.com/tuning/steering-wheels/jet.html
http://www.samocoind.com/T56MODULE.html
http://www.dakotadigital.com/index.c...rod/prd886.htm
Flywheel bolts ARP-200-2807
Pressure plate bolts ARP-134-2202
Bell to trans studs ARP-245-0901
http://www.momousa.com/tuning/steering-wheels/jet.html
Last edited by toxik IROC; 03-13-2014 at 04:18 PM.
03-13-2014, 07:50 PM
#49
Supreme Member
iTrader: (2)
Join Date: Feb 2005
Location: West Warwick RI, postal code: 02893
Posts: 4,337
Received 55 Likes
on
41 Posts
Car: Building LS3, T56 Z28
Engine: LS3
Transmission: T-56
Axle/Gears: Moser/ 4.11
Re: Fs/FT klearz tail lights
I have all those bolts....
But am currently using them :-(
But am currently using them :-(
03-13-2014, 09:27 PM
#50
Supreme Member
Thread Starter
iTrader: (12)
Join Date: Aug 2005
Location: M.D
Posts: 1,923
Likes: 0
Received 2 Likes
on
1 Post
Car: 1987 Camaro
Engine: 350 hsr
Transmission: 700R4(blown)
Axle/Gears: 3:73
Re: Fs/FT klearz tail lights
sweet, glad I picked some good bolts to buy....But I still would verymuch like to sell these lenses