Trans Am Hunting
10-28-2012, 03:32 PM
#1
Supreme Member
Thread Starter
iTrader: (1)
Join Date: Oct 2008
Location: Charleston SC
Posts: 1,107
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am GTA
Engine: 350 TPI
Transmission: T56
Axle/Gears: Posi 3:42
Trans Am Hunting
UPDATED: 2/2016
TRANS AM HUNTING AGAIN!!!
Well I am looking for my next 3rd gen and am prepaired to buy as soon as find her.
I am not to happy with the CL finds for my price so i figure i spread the word.
I am willing to travel; So SC NC GA and FL guys are welcome to reply...could do maybe a bit more, but trying to stay with in the 4 hour range and if you are out there...it would be nice, to have the time to talk about the car, answer question, have some pic or videos long before i strap a trailer for a day drive and its not what was described.
Title is a Must, unless this is a wicked deal...so please no leins.
Most prefer 86-89 bodies styles Trans Am or GTA.
350 and 5spd manual would be first pick, but not a must.
I am more looking at the Mechs of the car being good base to work off of vers body...
Another words i am not buying interior or body so if its not the best i am not worried about it cause those things get replaced n repaired in time any way.
i just dont want a frame up full build project or motor swaps.
I am more leaning towards drivable project, i have done too much work, i want to have some fun this time around.
I am looking to spend between to 3500-5000.
Only personal request is be honest, I have bought them in worst condition and did it knowingly.
My pet peeve is that "everyone" has a "new" motor and "everyone" has a stroker. When i bought mine, i kept the paperwork, recites and all....down to the plugs.
thanks for your help guys
TRANS AM HUNTING AGAIN!!!
Well I am looking for my next 3rd gen and am prepaired to buy as soon as find her.
I am not to happy with the CL finds for my price so i figure i spread the word.
I am willing to travel; So SC NC GA and FL guys are welcome to reply...could do maybe a bit more, but trying to stay with in the 4 hour range and if you are out there...it would be nice, to have the time to talk about the car, answer question, have some pic or videos long before i strap a trailer for a day drive and its not what was described.
Title is a Must, unless this is a wicked deal...so please no leins.
Most prefer 86-89 bodies styles Trans Am or GTA.
350 and 5spd manual would be first pick, but not a must.
I am more looking at the Mechs of the car being good base to work off of vers body...
Another words i am not buying interior or body so if its not the best i am not worried about it cause those things get replaced n repaired in time any way.
i just dont want a frame up full build project or motor swaps.
I am more leaning towards drivable project, i have done too much work, i want to have some fun this time around.
I am looking to spend between to 3500-5000.
Only personal request is be honest, I have bought them in worst condition and did it knowingly.
My pet peeve is that "everyone" has a "new" motor and "everyone" has a stroker. When i bought mine, i kept the paperwork, recites and all....down to the plugs.
thanks for your help guys
Last edited by BlackTopKing; 02-16-2016 at 09:34 PM. Reason: updating info and date
10-28-2012, 03:35 PM
#2
Supreme Member
Thread Starter
iTrader: (1)
Join Date: Oct 2008
Location: Charleston SC
Posts: 1,107
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am GTA
Engine: 350 TPI
Transmission: T56
Axle/Gears: Posi 3:42
Re: Trans Am Hunting
Rj
Last edited by BlackTopKing; 02-16-2016 at 09:34 PM. Reason: .
01-30-2016, 12:20 PM
#3
Want a title? Post!
Join Date: Jan 2016
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Re: Trans Am Hunting
may have a car for you, north of you in Jacksonville nc. 1985 Trans -Am, contact me for the particulars or text me 910-330-0786. Good luck
Well I am looking for my next 3rd gen and am prepaired to buy as soon as find her. I am not to happy with the CL finds for my price so i figure i spread the word. I am willing to travel as long as the car can drive on its own home and it has a title, So SC NC GA and FL guys are welcome to reply...could do DE and MD for the right one, but 4hours is kind of the range. i am in Charleston SC
and am looking for a 86-89 Trans Am or GTA, just has to be 350block or 400block, and a 5spd would be best but not a must.
I am more look at the Mechs of the car being good base to work off of vers body...Another words i am not buying interior or body so if its not the best i am not worried about it cause those things get replaced n repaired in time any way.
i just dont want a frame up full build project.
kinda more like a drivable project
I am looking to spend between 2000 to 3000 for one and if needed can barter in services for the right TA.
I have a custom paint and airbrush studio in charlestion
BackTop Ink.com
thanks for your help guys
and am looking for a 86-89 Trans Am or GTA, just has to be 350block or 400block, and a 5spd would be best but not a must.
I am more look at the Mechs of the car being good base to work off of vers body...Another words i am not buying interior or body so if its not the best i am not worried about it cause those things get replaced n repaired in time any way.
i just dont want a frame up full build project.
kinda more like a drivable project
I am looking to spend between 2000 to 3000 for one and if needed can barter in services for the right TA.
I have a custom paint and airbrush studio in charlestion
BackTop Ink.com
thanks for your help guys
02-22-2016, 02:11 PM
#5
Junior Member
iTrader: (1)
Join Date: Apr 2012
Location: Parma, Ohio
Posts: 8
Received 0 Likes
on
0 Posts
Car: 1987 GTA & 1984 Trans Am
Engine: 383 stroker TPI
Transmission: 700R4
Axle/Gears: 3.27
Re: Trans Am Hunting
See my 87 Black GTA ad in the for sale forum to see if that is something of interest to you.
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
05-10-2023 07:19 PM
