[AR] Custom Fiberglass door speaker pods FS
#1
Senior Member
Thread Starter
iTrader: (15)
Join Date: Jun 2005
Location: NE Arkansas
Posts: 880
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1971 Camaro
Custom Fiberglass door speaker pods FS
Hey Guys and Gals,
Built a speaker pod for the 82-92 Fbody with the flat door panels and power windows
They are made of fiberglass and come with a mdf grill blank.
The accommodate several speaker combinations up to two 6.5" speakers per side. It will be up to you to finish these out.
For some reason these are a hard sell, I get a lot of empty promises and tire kickers on facebook lol.
But the one's that have bought them really like them.
$175 shipped to lower 48
___________________________________________________________________________________________________________________________________________
This is what they could look like installed
Built a speaker pod for the 82-92 Fbody with the flat door panels and power windows
They are made of fiberglass and come with a mdf grill blank.
The accommodate several speaker combinations up to two 6.5" speakers per side. It will be up to you to finish these out.
For some reason these are a hard sell, I get a lot of empty promises and tire kickers on facebook lol.
But the one's that have bought them really like them.
$175 shipped to lower 48
___________________________________________________________________________________________________________________________________________
This is what they could look like installed
Last edited by 88TransAmFreak; 11-14-2016 at 08:00 AM.
#2
Member
iTrader: (10)
Join Date: May 2013
Location: Aliquippa, PA
Posts: 378
Likes: 0
Received 5 Likes
on
1 Post
Car: '87 Trans Am
Engine: 5.0L-V8
Transmission: 700R4
Axle/Gears: 3.23 - Posi -10 Bolt
Re: Custom Fiberglass door speaker pods FS
Love my pair, he was fast shipper, professionally packed, and even came with 3 page generalized directions / suggestions.
Trending Topics
#8
Supreme Member
iTrader: (6)
Join Date: Oct 2006
Location: West of Toronto
Posts: 3,041
Likes: 0
Received 6 Likes
on
6 Posts
Car: 89 IROC
Engine: 305 TPI / ZZ4 cam
Transmission: Stage 2 700R4, LS1 driveshaft
Axle/Gears: Strange 3.42 w/ Auburn
Re: Custom Fiberglass door speaker pods FS
Bump for a solid product.
#13
Member
Join Date: Oct 2011
Location: South Bend,IN
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
Car: '97 TA WS6 vert & '88 Formula 350
Engine: LT1 & 383 HSR
Transmission: T-56 & T-56
Axle/Gears: 3.42 & 3.27
Re: Custom Fiberglass door speaker pods FS
Wow, those look nice! I have map pockets on my Formula though. When I get around to restoring my '83 Recaro I will have to hit you up!
#14
Senior Member
Thread Starter
iTrader: (15)
Join Date: Jun 2005
Location: NE Arkansas
Posts: 880
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1971 Camaro
Re: Custom Fiberglass door speaker pods FS
TTT, still for sale.
I can't believe no one has snatched these up yet as much as the third gen guys like their car stereos.
I can't believe no one has snatched these up yet as much as the third gen guys like their car stereos.
#23
Senior Member
Thread Starter
iTrader: (15)
Join Date: Jun 2005
Location: NE Arkansas
Posts: 880
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1971 Camaro
Re: Custom Fiberglass door speaker pods FS
Good deal, those went our earlier. - Thanks again
Last edited by 88TransAmFreak; 03-15-2015 at 08:22 AM.
#27
Junior Member
Re: Custom Fiberglass door speaker pods FS
Hey guys,
Just chiming in to vouch for the quality of these enclosures. I was looking for a custom solution to putting speakers in my doors when Dennis posted these amazing pods he created.
Easy to deal with, high quality product, full set of instructions included and he's quick to communicate. Product came in very quickly.
Get these pods now before you miss the chance. They're low production so you will be one of the only people to have one of these in your ride!
Thanks Dennis!
Just chiming in to vouch for the quality of these enclosures. I was looking for a custom solution to putting speakers in my doors when Dennis posted these amazing pods he created.
Easy to deal with, high quality product, full set of instructions included and he's quick to communicate. Product came in very quickly.
Get these pods now before you miss the chance. They're low production so you will be one of the only people to have one of these in your ride!
Thanks Dennis!
#36
Junior Member
Re: Custom Fiberglass door speaker pods FS
Bought a set for my camaro over a year ago from Dennis.
@Dennis - Finally got around to installing your handiwork....bought these a while back and have been waiting to install. The door panel will be getting custom upholstered in black leather with orange stitching. I chose not to use the blanks and just expose the speakers
For their limited quantity, it's totally worth the price! Someone grab the last pair!
@Dennis - Finally got around to installing your handiwork....bought these a while back and have been waiting to install. The door panel will be getting custom upholstered in black leather with orange stitching. I chose not to use the blanks and just expose the speakers
For their limited quantity, it's totally worth the price! Someone grab the last pair!
#37
Senior Member
Thread Starter
iTrader: (15)
Join Date: Jun 2005
Location: NE Arkansas
Posts: 880
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1971 Camaro
Re: Custom Fiberglass door speaker pods FS
Wow, those turned out nice. I def like how you painted the pods versus covering. They will pop against the leather when you get the doors done.
Thanks for the props
BTW I have these on eBay too (will sell to the first buyer here or there) , you mind if I used the picture of them mounted on the door you posted?
Thanks for the props
BTW I have these on eBay too (will sell to the first buyer here or there) , you mind if I used the picture of them mounted on the door you posted?
#38
Senior Member
Thread Starter
iTrader: (15)
Join Date: Jun 2005
Location: NE Arkansas
Posts: 880
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1971 Camaro
Re: Custom Fiberglass door speaker pods FS
TTT
I have these packed and ready to slap a label on and ship, just waiting on that lucky buyer to jump on them
I have these packed and ready to slap a label on and ship, just waiting on that lucky buyer to jump on them
Last edited by 88TransAmFreak; 02-17-2016 at 11:50 AM.
#42
Senior Member
iTrader: (1)
Join Date: Dec 2011
Location: Vancouver
Posts: 552
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Trans am GTA
Engine: 305 TPI
Transmission: t56 6 speed
Axle/Gears: 3.45
Re: Custom Fiberglass door speaker pods FS
Ugh I'm choked that I missed out on this. Would you consider making another pair? I would pay upfront in a heartbeat.
#43
Senior Member
Thread Starter
iTrader: (15)
Join Date: Jun 2005
Location: NE Arkansas
Posts: 880
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1971 Camaro
Re: Custom Fiberglass door speaker pods FS
I'm sorry, I'm going to hold firm with not making these anymore.
They are somewhat a pain to make, and as you can see from the thread time stamp there was very little interest in them.
Just not worth the time and effort anymore, and this was a hobbyist thing anyways and I want to focus on other things.
Thanks
They are somewhat a pain to make, and as you can see from the thread time stamp there was very little interest in them.
Just not worth the time and effort anymore, and this was a hobbyist thing anyways and I want to focus on other things.
Thanks
#44
Senior Member
iTrader: (1)
Join Date: Dec 2011
Location: Vancouver
Posts: 552
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Trans am GTA
Engine: 305 TPI
Transmission: t56 6 speed
Axle/Gears: 3.45
Re: Custom Fiberglass door speaker pods FS
I'm sorry, I'm going to hold firm with not making these anymore.
They are somewhat a pain to make, and as you can see from the thread time stamp there was very little interest in them.
Just not worth the time and effort anymore, and this was a hobbyist thing anyways and I want to focus on other things.
Thanks
They are somewhat a pain to make, and as you can see from the thread time stamp there was very little interest in them.
Just not worth the time and effort anymore, and this was a hobbyist thing anyways and I want to focus on other things.
Thanks
#45
Senior Member
Thread Starter
iTrader: (15)
Join Date: Jun 2005
Location: NE Arkansas
Posts: 880
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1971 Camaro
Re: Custom Fiberglass door speaker pods FS
Got my 71 Camaro done and have time again so i have a couple in the box ready to ship
Just need to slap a label on them and send them out
Just need to slap a label on them and send them out
#46
Member
Re: Custom Fiberglass door speaker pods FS
Dennis, i saw your speaker pods for GTA's on eBay do you have any pics of them in a car?
dale
dale
#49
Senior Member
Thread Starter
iTrader: (15)
Join Date: Jun 2005
Location: NE Arkansas
Posts: 880
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1971 Camaro
Re: Custom Fiberglass door speaker pods FS
Still have some, ready to put a label on and ship. Also have a couple of GTA pods ready to ship as well.
#50
Senior Member
Thread Starter
iTrader: (15)
Join Date: Jun 2005
Location: NE Arkansas
Posts: 880
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1971 Camaro
Re: Custom Fiberglass door speaker pods FS
Christmas is around the corner, ready to slap a label on it
$175 shipped - 3 sets to sell
$175 shipped - 3 sets to sell
Last edited by 88TransAmFreak; 11-14-2016 at 08:00 AM.