Dash compatablitity question?
#1
Member
Thread Starter
Join Date: May 2015
Location: Washington State
Posts: 494
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1986 IROC Z
Engine: 305 TPI
Transmission: Auto
Dash compatablitity question?
So I'm at the wrecking yard today getting a pocket for my gas filler and noticed they have added another third gen to their inventory. I start checking it out and can't believe my eyes when I see it's dash pad does not have a single crack in it! They said I could have it for $125.00 which I think is an outstanding price.
The car is a '91 Firebird and I have an '86 IROC. The Firebird dash should fit my car, right?
Also, anyone out there tried this? If so, I'd love to see some pictures,
The car is a '91 Firebird and I have an '86 IROC. The Firebird dash should fit my car, right?
Also, anyone out there tried this? If so, I'd love to see some pictures,
#7
Senior Member
iTrader: (1)
Join Date: Jun 2014
Location: Southeast VA
Posts: 538
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Camaro RS T-Top
Engine: 5.0 Tbi
Transmission: 700r4
Axle/Gears: 3.42
Re: Dash compatablitity question?
I got hit by the same thing. I bought what I was told was a camaro dash with no crack for 40 bucks and thought I got a steal of a deal but turned out to be a firebird dash. It's just chilling in my closet now in case i end up with a bird
Trending Topics
#8
Supreme Member
iTrader: (13)
Join Date: Dec 2002
Location: Bowdon, GA.
Posts: 2,535
Likes: 0
Received 16 Likes
on
14 Posts
Car: 1988 Camaro
Engine: 355, 10.34:1, 249/252 @.050", IK200
Transmission: TH-400, 3500 stall 9.5" converter
Axle/Gears: Ford 9", detroit locker, 3.89 gears
Re: Dash compatablitity question?
The Camaro dash pad has a slight cut out in the front center for the Hvac vents... Firebird is straight flat across.
#9
Senior Member
iTrader: (1)
Join Date: Jun 2014
Location: Southeast VA
Posts: 538
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Camaro RS T-Top
Engine: 5.0 Tbi
Transmission: 700r4
Axle/Gears: 3.42
Re: Dash compatablitity question?
It's not just that, the firebird dash isn't as long from front to back either.
#10
Senior Member
Join Date: Sep 2008
Location: France
Posts: 588
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1984 Pontiac Firebird Trans Am
Engine: V8 5.0L HO (L69)
Transmission: B&W T5
Axle/Gears: 3.73 limited slip
Re: Dash compatablitity question?
The dash and center console are among the list of parts that are completely different between Camaros and Firebirds :
- quarter panels
- fenders
- hood
- front and rear bumper
- tail lights and tail panel
- ground effects
- dash
- center console
- seats, rims, door panels are interchangeable but different style
That's for the major stuff
- quarter panels
- fenders
- hood
- front and rear bumper
- tail lights and tail panel
- ground effects
- dash
- center console
- seats, rims, door panels are interchangeable but different style
That's for the major stuff
#11
Member
Thread Starter
Join Date: May 2015
Location: Washington State
Posts: 494
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1986 IROC Z
Engine: 305 TPI
Transmission: Auto
Re: Dash compatablitity question?
Just ran across an '84 Camaro with a perfect dash. You're all saying this will NOT fit my '86 IROC?
#13
Supreme Member
iTrader: (167)
Re: Dash compatablitity question?
Yes,.. the 84 Camaro dash pad WILL fit your 86 without any problems.
I'm almost certain that Ceamaro dash pad range is 82-83 ( with the "line" along the front edge ) and 84-92 style. ( with rounded edge ). There might be a later 90's style that's "year correct" too,..... something to do with the speaker grills or something,....... ??
Any ThirdGen Camaro dash pad will fit without modifications to any other 82-92 . The changes are changes for year to year style only,... mounting is not an issue and they are all interchangeable.
The easiest way to figure out if your looking at a Camaro pad vs. a Firebird pad is to look for a notch in the center/front lip of the pad. As Night rider327 pointed out,... The Camaro has the notch in the front edge for the Blower Vents while the Firebird pad is straight across the front lip.
I'm almost certain that Ceamaro dash pad range is 82-83 ( with the "line" along the front edge ) and 84-92 style. ( with rounded edge ). There might be a later 90's style that's "year correct" too,..... something to do with the speaker grills or something,....... ??
Any ThirdGen Camaro dash pad will fit without modifications to any other 82-92 . The changes are changes for year to year style only,... mounting is not an issue and they are all interchangeable.
The easiest way to figure out if your looking at a Camaro pad vs. a Firebird pad is to look for a notch in the center/front lip of the pad. As Night rider327 pointed out,... The Camaro has the notch in the front edge for the Blower Vents while the Firebird pad is straight across the front lip.
#14
Supreme Member
iTrader: (4)
Join Date: Sep 2004
Location: MN
Posts: 2,069
Likes: 0
Received 3 Likes
on
3 Posts
Car: 85 SC, 86 Berlinetta
Engine: V6, V8
Transmission: 700r4, 700r4
Re: Dash compatablitity question?
Great find! The Firebird dash pad is worth much more than one for a Camaro. You could sell/trade and come out ahead.
#15
Junior Member
Join Date: Mar 2009
Location: sioux lookout ON. Canada
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Car: 83 firebird
Engine: 350
Transmission: 700
Axle/Gears: 3.23
Re: Dash compatablitity question?
I scored a great Camaro dash a while ago, won't fit my firebird. passed it on to a good friend with a great Camaro.
Thread
Thread Starter
Forum
Replies
Last Post
The_Phoenix
Interior Parts for Sale
12
02-04-2016 07:10 AM
Vintageracer
Interior Parts for Sale
1
08-11-2015 08:13 PM