Pocket Plug And Play Harness Review and Install
#1
Supreme Member
Thread Starter
iTrader: (6)
Join Date: Aug 2011
Location: San Diego, California For Now
Posts: 2,379
Likes: 0
Received 10 Likes
on
10 Posts
Car: 88 Formula, 90 Iroc RIP, 92 RS Sold
Engine: 305 to 350
Transmission: 700r4
Axle/Gears: 10 Bolt
Pocket Plug And Play Harness Review and Install
I admit my defeat and just don't have time to make a nice looking harness and my LS1 one harness was a rough shape .
During tear down of my LS1 harness notice alot of frayed or damaged wiring but i still kept moving forward not to mention im colorblind
Here how my harness started out and came to be for comparison purpose fyi not my pics but close to how it look i didnt take any
After many many many many many Hours, over many days
Started to look like this ..
installing harness
During tear down of my LS1 harness notice alot of frayed or damaged wiring but i still kept moving forward not to mention im colorblind
Here how my harness started out and came to be for comparison purpose fyi not my pics but close to how it look i didnt take any
After many many many many many Hours, over many days
Started to look like this ..
installing harness
#2
Supreme Member
Thread Starter
iTrader: (6)
Join Date: Aug 2011
Location: San Diego, California For Now
Posts: 2,379
Likes: 0
Received 10 Likes
on
10 Posts
Car: 88 Formula, 90 Iroc RIP, 92 RS Sold
Engine: 305 to 350
Transmission: 700r4
Axle/Gears: 10 Bolt
Re: Pocket Plug And Play Harness Review and Install
So box came less than week quick turn around time he had 4 other orders same day or week IIRC
Now closer detail pics as you can see its pretty much all new wiring and connectors and as you can tell alot of work and quality wiring ,soldering etc,nothing feels loose and looks this will last a long time
All connectors come labeled along with power and ground , if you can read and can connect a plug into a outlet this will be Cake to install
Heres the C100 no messing with the tar grease and soaking in in gasoline or brake cleaner lol
Relay for the fans fuel pump, you can choose to place in stock location or hidden near battery i choose the hidden route to clean up engine bay
then lastly the connectors to the ECU
i didnt bother taking pic of every connector as there all new and if your doing a swap you would know how they look like only difference there NEW
Now closer detail pics as you can see its pretty much all new wiring and connectors and as you can tell alot of work and quality wiring ,soldering etc,nothing feels loose and looks this will last a long time
All connectors come labeled along with power and ground , if you can read and can connect a plug into a outlet this will be Cake to install
Heres the C100 no messing with the tar grease and soaking in in gasoline or brake cleaner lol
Relay for the fans fuel pump, you can choose to place in stock location or hidden near battery i choose the hidden route to clean up engine bay
then lastly the connectors to the ECU
i didnt bother taking pic of every connector as there all new and if your doing a swap you would know how they look like only difference there NEW
#3
Senior Member
iTrader: (1)
Join Date: Jun 2009
Location: N.E. Ohio
Posts: 564
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 Gta
Engine: 5.3
Transmission: 4l60e
Axle/Gears: 3.42
Re: Pocket Plug And Play Harness Review and Install
I'll agree. Iv been wanting to do this myself. My harness was absolutely destroyed once I started getting into. Some of the wires were melted some were just loose and fell right out.
Anyways, these new harnesses from Pocket are amazing! Very easy to install and everything is new. It took me longer to make a hole in the firewall than to install this harness. On top of it, his harness just fits so well. These are top notch and I would recommend them to anyone.
Anyways, these new harnesses from Pocket are amazing! Very easy to install and everything is new. It took me longer to make a hole in the firewall than to install this harness. On top of it, his harness just fits so well. These are top notch and I would recommend them to anyone.
#4
Junior Member
iTrader: (1)
Join Date: Feb 2013
Location: San Antonio TX
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro RS
Engine: 5.3 V8 LS
Transmission: 700R4
Axle/Gears: 3.42
Re: Pocket Plug And Play Harness Review and Install
Looks nice. Do you have any installed pics Im currently filling out his build sheet to get mine coming. Havent been on here that long but his name (pocket) keeps coming up in the lsx swap section so im going to get one coming.
#5
Senior Member
Re: Pocket Plug And Play Harness Review and Install
I enjoyed building mine, it works but it just isn't as pretty as pocket's harness, so even though I built my own and it works just fine I'll still be getting one of his.
#6
Supreme Member
Thread Starter
iTrader: (6)
Join Date: Aug 2011
Location: San Diego, California For Now
Posts: 2,379
Likes: 0
Received 10 Likes
on
10 Posts
Car: 88 Formula, 90 Iroc RIP, 92 RS Sold
Engine: 305 to 350
Transmission: 700r4
Axle/Gears: 10 Bolt
Re: Pocket Plug And Play Harness Review and Install
True that
Will be posting pics of harness installed shortly just had new edition to fam so spending time with lil man
Will be posting pics of harness installed shortly just had new edition to fam so spending time with lil man
#7
Supreme Member
Re: Pocket Plug And Play Harness Review and Install
Pocket is the way to go! As soon as I get all of my ducks in a row I will be placing my order too.
Trending Topics
#8
Senior Member
iTrader: (1)
Join Date: Jun 2009
Location: N.E. Ohio
Posts: 564
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 Gta
Engine: 5.3
Transmission: 4l60e
Axle/Gears: 3.42
Re: Pocket Plug And Play Harness Review and Install
I really need to take pics but winter came to fast for me. His harness fits like a glove. I couldn't believe how nice everything went together.
#9
Junior Member
iTrader: (1)
Join Date: Feb 2013
Location: San Antonio TX
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro RS
Engine: 5.3 V8 LS
Transmission: 700R4
Axle/Gears: 3.42
Re: Pocket Plug And Play Harness Review and Install
Well sounds like everyone likes his harness. Good thing too because i just ordered mine yesterday.
#12
Supreme Member
Thread Starter
iTrader: (6)
Join Date: Aug 2011
Location: San Diego, California For Now
Posts: 2,379
Likes: 0
Received 10 Likes
on
10 Posts
Car: 88 Formula, 90 Iroc RIP, 92 RS Sold
Engine: 305 to 350
Transmission: 700r4
Axle/Gears: 10 Bolt
Re: Pocket Plug And Play Harness Review and Install
Excuse the dirty milk bucket as getting it up in running is top of list
Thread
Thread Starter
Forum
Replies
Last Post