Need to sell my 1990 camaro project
#1
Junior Member
Thread Starter
iTrader: (1)
Join Date: Feb 2009
Location: Oakland, CA
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 Camaro RS
Engine: 305 TBI
Transmission: 4L60
Axle/Gears: BW 9-bolt 3.27
Need to sell my 1990 camaro project
As the title states I need to sell my Camaro, right now it is a rolling chassis with the front end off and the interior mostly stripped but I have almost everything to put it back together. I was going to build it up to be a street/track car that I could daily drive and take to the track on weekends.
Currently on the car:
Bilstien HD struts and shocks (less than 1000 miles)
IROC replacement springs(less than 1000 miles)
9 bolt Borg Warner 3.27 Posi (Fully rebuilt with less than 1000 miles)+ HD sway bar
4 wheel disk brakes (rear aluminum pbr calipers,need axle hardline)
16" BMW wheels with Falken Ziex tires
The Parts Pile:
zz4 350 short block with 10,000 miles(new vortec cam and lifters,new high volume oil pump)
TBI swirl port 1.94 heads 10,000 miles(currently disassembled for cleaning)
TPI intake cleaned and ready to go with new gaskets and full wiring harness
700r4 trans unknown mileage ran when pulled(have new pan,gasket and filter)
new mini starter
New BMR on car adjustable panhard bar
Full aluminum radiator
brand new Goodyear super hi-miler blue nomex cooling hoses
Hedman header smog legal headers
new stainles steel brake lines and lots more
Needed:
windshield(already removed broken one)
hard brake line for rear axle
I have at least a few grand in parts alone, so I would to get at least that much for all of it but I'm open to offers as long as there reasonable. I might be willing to part it out if someone will buy the rolling chassis first. feel free to ask questions, pics on request.
Currently on the car:
Bilstien HD struts and shocks (less than 1000 miles)
IROC replacement springs(less than 1000 miles)
9 bolt Borg Warner 3.27 Posi (Fully rebuilt with less than 1000 miles)+ HD sway bar
4 wheel disk brakes (rear aluminum pbr calipers,need axle hardline)
16" BMW wheels with Falken Ziex tires
The Parts Pile:
zz4 350 short block with 10,000 miles(new vortec cam and lifters,new high volume oil pump)
TBI swirl port 1.94 heads 10,000 miles(currently disassembled for cleaning)
TPI intake cleaned and ready to go with new gaskets and full wiring harness
700r4 trans unknown mileage ran when pulled(have new pan,gasket and filter)
new mini starter
New BMR on car adjustable panhard bar
Full aluminum radiator
brand new Goodyear super hi-miler blue nomex cooling hoses
Hedman header smog legal headers
new stainles steel brake lines and lots more
Needed:
windshield(already removed broken one)
hard brake line for rear axle
I have at least a few grand in parts alone, so I would to get at least that much for all of it but I'm open to offers as long as there reasonable. I might be willing to part it out if someone will buy the rolling chassis first. feel free to ask questions, pics on request.
#3
Junior Member
Thread Starter
iTrader: (1)
Join Date: Feb 2009
Location: Oakland, CA
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 Camaro RS
Engine: 305 TBI
Transmission: 4L60
Axle/Gears: BW 9-bolt 3.27
Re: Need to sell my 1990 camaro project
I would like to get $1000 for the rolling chassis. Will have pics tomorrow.
Thread
Thread Starter
Forum
Replies
Last Post
IWANNAROCAGAIN
Engine/Drivetrain/Suspension Parts for Sale
51
03-10-2016 07:07 PM
92RSB4C
Interior Parts for Sale
12
03-09-2016 08:11 PM
92RSB4C
Engine/Drivetrain/Suspension Parts for Sale
8
10-08-2015 10:30 AM
sjorgens
Suspension and Chassis
7
10-01-2015 07:54 PM