83 Camaro 383 Stroker Oil Pan Stock K-Member
#1
Junior Member
Thread Starter
Join Date: Sep 2014
Location: Redding, CA
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Car: 83' Camaro
Engine: 383 Stroker
Transmission: Powerglide
Axle/Gears: 4.56
83 Camaro 383 Stroker Oil Pan Stock K-Member
Anyone now which 7qt oil pan will fit in my 83 Camaro 383 stoker 6" h-beam rods. Car has stock K member. I've searched summit and jegs websites and really couldn't find one that say it is for that application.
#3
Junior Member
Thread Starter
Join Date: Sep 2014
Location: Redding, CA
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Car: 83' Camaro
Engine: 383 Stroker
Transmission: Powerglide
Axle/Gears: 4.56
Re: 83 Camaro 383 Stroker Oil Pan Stock K-Member
6 qt would work. 2 piece seal 1st gen SBC. Need windage and passenger side dipstick. What model of Moroso pan are you running? Do you have stock K-Member?
#4
Supreme Member
iTrader: (13)
Re: 83 Camaro 383 Stroker Oil Pan Stock K-Member
i can't find the one we're running. car has a stock k-member still. this one says it'll work with the chassis though, and is 7 qts. you should be able to run a windage tray with this one no problem:
http://www.summitracing.com/parts/mo...t/model/camaro
http://www.summitracing.com/parts/mo...t/model/camaro
#5
Junior Member
Thread Starter
Join Date: Sep 2014
Location: Redding, CA
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Car: 83' Camaro
Engine: 383 Stroker
Transmission: Powerglide
Axle/Gears: 4.56
Re: 83 Camaro 383 Stroker Oil Pan Stock K-Member
i can't find the one we're running. car has a stock k-member still. this one says it'll work with the chassis though, and is 7 qts. you should be able to run a windage tray with this one no problem:
http://www.summitracing.com/parts/mo...t/model/camaro
http://www.summitracing.com/parts/mo...t/model/camaro
#6
Supreme Member
iTrader: (13)
Join Date: Dec 2002
Location: Bowdon, GA.
Posts: 2,535
Likes: 0
Received 16 Likes
on
14 Posts
Car: 1988 Camaro
Engine: 355, 10.34:1, 249/252 @.050", IK200
Transmission: TH-400, 3500 stall 9.5" converter
Axle/Gears: Ford 9", detroit locker, 3.89 gears
Re: 83 Camaro 383 Stroker Oil Pan Stock K-Member
I have the summit 7 qt. pan on my 355 in my '88 camaro with stock K member. Fits the chassis just fine, and says will fit up to 3.75" stroke
http://www.summitracing.com/parts/sum-g3502/overview/
http://www.summitracing.com/parts/sum-g3502/overview/
#7
Junior Member
Thread Starter
Join Date: Sep 2014
Location: Redding, CA
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Car: 83' Camaro
Engine: 383 Stroker
Transmission: Powerglide
Axle/Gears: 4.56
Re: 83 Camaro 383 Stroker Oil Pan Stock K-Member
Thanks. I found a 7qt moroso that is stroker clearanced. Will see if it fits by the K member.
Trending Topics
#9
Moderator
Join Date: Jul 1999
Location: 51°N 114°W, 3500'
Posts: 17,108
Likes: 0
Received 120 Likes
on
101 Posts
Car: 87 IROC L98
Engine: 588 Alcohol BBC
Transmission: Powerglide
Axle/Gears: Ford 9"/31 spline spool/4.86
Re: 83 Camaro 383 Stroker Oil Pan Stock K-Member
Depth of the pan means very little for a stroker unless you have a huge stroke increase. Increased stroke normally requires a little extra pan clearance along the rails mainly for the rod bolts to clear.
#10
Junior Member
Thread Starter
Join Date: Sep 2014
Location: Redding, CA
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Car: 83' Camaro
Engine: 383 Stroker
Transmission: Powerglide
Axle/Gears: 4.56
Re: 83 Camaro 383 Stroker Oil Pan Stock K-Member
Dropping it in this weekend will let you know
#11
Junior Member
Thread Starter
Join Date: Sep 2014
Location: Redding, CA
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Car: 83' Camaro
Engine: 383 Stroker
Transmission: Powerglide
Axle/Gears: 4.56
Re: 83 Camaro 383 Stroker Oil Pan Stock K-Member
Ok Motors in. I used a Moroso 20191 and it fit perfect. My block is older so the dipstick was on the drivers side but they also make a passenger side version. Plenty of clearance behind the K Member but hangs down about 1/2" below the K member. I was able to stab the motor and tranny in together very happy with it.
#12
Supreme Member
iTrader: (56)
Re: 83 Camaro 383 Stroker Oil Pan Stock K-Member
milodon makes a 7qt oil pan..fits stock 3rd gen cars pass side dip stick.
takes the chevy windg try..fit the SLP headers y pipe set up also..it's bigger the the stock pipe...still have one layn in my old shop with my Lingenfelter 383..just getting dusty.. it needs a new home
takes the chevy windg try..fit the SLP headers y pipe set up also..it's bigger the the stock pipe...still have one layn in my old shop with my Lingenfelter 383..just getting dusty.. it needs a new home
Thread
Thread Starter
Forum
Replies
Last Post
mhatfield 14
Tech / General Engine
5
10-24-2015 07:48 AM
Navy8125
Engine/Drivetrain/Suspension Parts for Sale
4
08-21-2015 09:32 AM