isaacim

http://www.summitracing.com/parts/tn...rjwaAurH8P8HAQ

Found this on summit while looking for some parts... anyone use these?
Will this work well with the fuel injected v6?
I'm a little skeptical of this turbo...

project89

iTrader: (1)

2.8 or 3.1?

thats not an whole turbo , its a compressor housing only
give me some more info on the car itself is it bone stock , and what r ur goals for it


http://autoplicity.com/368480-turbon...rs-deptartment same part number as from summit and every other site shows it as the compressor housing only

isaacim

And here I was thinking that I found the best deal ever...
At this point I'll just go and get a 5.3 swap for less money. Thanks for the info

project89

iTrader: (1)

dont discard the idea yet , u can buy an ebay t3/t4 for 130 bucks shipped , or an ebay gt3582 for 200 and make around 450 hp with the v6

look in the v6 section for my v6 turbo builds and fasteddis and willieox's builds u can do a bar ebones turbo system for around 800 bucks and they are reliable

ive been using ebay turbos for like 9 years now

isaacim

Aren't ebay turbos hit or miss most of the time?
450 out of a v6? Holy crap I'll look into those

project89

iTrader: (1)

some of the ebay turbos are hit and miss , the other turbos liek the cheap t3/t4's gt35 gt45 have been proven to be dead reliable

Drac0nic

Don't forget HX35s or HY35s on the secondary market. Solid turbos that can be found at a good price.

project89

iTrader: (1)

also good choices , as is the he351

isaacim

So after doing what i do best, researching, i have come to having a cxracing gt35 t4 turbo with the stock v6 and a custom exhaust manifold and forced induction cam
Question is, is there anyone making cams suitable for forced induction for these engines?

isaacim

sorry double post

project89

iTrader: (1)

gt3582 witht he t3 turbine u dont want the t4 housing on a pretty sock 2.8/3.1
auto or stick?

http://deltacam.com/

^^ ask for a 260 cam its 115$ shipped with lifters with an auto trans , if u have a manual the 272 hydraulic grind will make abunch more top end power

do not get the 272 mechanical/solid lifter grind

isaacim

what specs for the turbo should i look for? like A/R and things like that
and im planning to swap in a manual

RaverRacerX

on3 performance makes reliable, inexpensive turbos.