Garage Sale (Stafford)
#1
Moderator
Thread Starter
iTrader: (6)
Join Date: Nov 2002
Location: North of Houston
Posts: 2,004
Likes: 0
Received 8 Likes
on
6 Posts
Car: '82 Camaro 11.7@121
Engine: 377
Transmission: 400
Axle/Gears: Dana 44 / 3.31:1
Garage Sale (Stafford)
Open House this Saturday (9-21-2013) from Noon until 4:00PM.
Come on out and take a look at everything.
I've got to make some room so a bunch of stuff has got to go.
If anyone would like to come out to my shop in Stafford (77477) you are welcome to look around. The following pictures and descriptions are about 75% of what needs to go. The rest is misc. little stuff that came off of the various third-gens I parted out over the years.
What hasn't sold in two weeks will most likely go in the dumpster, so if you are interested in something place a bid. You might get it cheap. Any semi-reasonable offer will be accepted on the spot.
All items must be picked up.
If you have any questions just ask.
Sold #1 below
Rusty headman long tube headers $50
84 Z28 front and rear sway bars $20 each or $30 for both.
#2
Camaro Tail lights, no cracks, good condition (just dusty) with small wiring harness $50/pair
92' Z-28 rear bumper (blue) small crack $40
front right Fender, good condition (no dents) $50
cloth rear seats bottoms(two)+back make offer
I also have not pictured:
two hatches (Sold 1)
Sold - one factory 91-92 High Rise hatch wing (Blue)
Sold harness - A second (MAF) TPI system with "painless" harness and computer $200
Victor Junior small block Chevy intake manifold, very good condition $125
Factory 2 barrel TBI intake manifold (88 Chevy truck?) $10
Carbs (Holley 650 double pumper + a couple of other holleys), distributors (HEI, Mallory+?), radiator electric fans(complete 92 Z-28 dual fan setup+ others), flex fans, several oil/tranny coolers, misc. exhaust parts
Lots more, come take a look.
Thanks for looking.
Come on out and take a look at everything.
I've got to make some room so a bunch of stuff has got to go.
If anyone would like to come out to my shop in Stafford (77477) you are welcome to look around. The following pictures and descriptions are about 75% of what needs to go. The rest is misc. little stuff that came off of the various third-gens I parted out over the years.
What hasn't sold in two weeks will most likely go in the dumpster, so if you are interested in something place a bid. You might get it cheap. Any semi-reasonable offer will be accepted on the spot.
All items must be picked up.
If you have any questions just ask.
Sold #1 below
Rusty headman long tube headers $50
84 Z28 front and rear sway bars $20 each or $30 for both.
#2
Camaro Tail lights, no cracks, good condition (just dusty) with small wiring harness $50/pair
92' Z-28 rear bumper (blue) small crack $40
front right Fender, good condition (no dents) $50
cloth rear seats bottoms(two)+back make offer
I also have not pictured:
two hatches (Sold 1)
Sold - one factory 91-92 High Rise hatch wing (Blue)
Sold harness - A second (MAF) TPI system with "painless" harness and computer $200
Victor Junior small block Chevy intake manifold, very good condition $125
Factory 2 barrel TBI intake manifold (88 Chevy truck?) $10
Carbs (Holley 650 double pumper + a couple of other holleys), distributors (HEI, Mallory+?), radiator electric fans(complete 92 Z-28 dual fan setup+ others), flex fans, several oil/tranny coolers, misc. exhaust parts
Lots more, come take a look.
Thanks for looking.
Last edited by esc; 05-16-2014 at 08:18 AM.
#2
Moderator
Thread Starter
iTrader: (6)
Join Date: Nov 2002
Location: North of Houston
Posts: 2,004
Likes: 0
Received 8 Likes
on
6 Posts
Car: '82 Camaro 11.7@121
Engine: 377
Transmission: 400
Axle/Gears: Dana 44 / 3.31:1
Re: Garage Sale (Stafford)
#1 and #2
'92 Z-28 dash board with wiring harness (door part cut) make offer
#3
TPI Intake/throttle body/ fuel rails/ injectors(unknown condition) $75
'92 Z-28 dash board with wiring harness (door part cut) make offer
#3
TPI Intake/throttle body/ fuel rails/ injectors(unknown condition) $75
#3
Moderator
Thread Starter
iTrader: (6)
Join Date: Nov 2002
Location: North of Houston
Posts: 2,004
Likes: 0
Received 8 Likes
on
6 Posts
Car: '82 Camaro 11.7@121
Engine: 377
Transmission: 400
Axle/Gears: Dana 44 / 3.31:1
Re: Garage Sale (Stafford)
#1
insulated AC evaporator housing W blower motor, no cracks or holes $50
(sold)
#2
Blue '92 Z-28 rear bumper shown earlier
#3
Center console bottom/sides
door threshold pieces
inside lower hatch trim
I have a lot of interior pieces that are not shown
insulated AC evaporator housing W blower motor, no cracks or holes $50
(sold)
#2
Blue '92 Z-28 rear bumper shown earlier
#3
Center console bottom/sides
door threshold pieces
inside lower hatch trim
I have a lot of interior pieces that are not shown
Last edited by esc; 09-13-2013 at 07:53 AM.
#4
Moderator
Thread Starter
iTrader: (6)
Join Date: Nov 2002
Location: North of Houston
Posts: 2,004
Likes: 0
Received 8 Likes
on
6 Posts
Car: '82 Camaro 11.7@121
Engine: 377
Transmission: 400
Axle/Gears: Dana 44 / 3.31:1
Re: Garage Sale (Stafford)
#1
Center console shifter covers
'92 Z-28 gauge cluster trim
AC evaporator (unknown condition)
#2
More of the same
#3
Center console cover w/ switches
hatch spoiler side pieces (center section not pictured, but in good condition) Black, I also have one white side piece (second white side piece may be around someplace)
Center console shifter covers
'92 Z-28 gauge cluster trim
AC evaporator (unknown condition)
#2
More of the same
#3
Center console cover w/ switches
hatch spoiler side pieces (center section not pictured, but in good condition) Black, I also have one white side piece (second white side piece may be around someplace)
#5
Moderator
Thread Starter
iTrader: (6)
Join Date: Nov 2002
Location: North of Houston
Posts: 2,004
Likes: 0
Received 8 Likes
on
6 Posts
Car: '82 Camaro 11.7@121
Engine: 377
Transmission: 400
Axle/Gears: Dana 44 / 3.31:1
Re: Garage Sale (Stafford)
#1
Better picture of center console top
Center Console radio/ac cover (pictured in console)
#2
Sold - 91-92 chin spoiler Good condition $100
center section of black hatch spoiler ($50 for all 3 pieces)
***** check first post for updates
Better picture of center console top
Center Console radio/ac cover (pictured in console)
#2
Sold - 91-92 chin spoiler Good condition $100
center section of black hatch spoiler ($50 for all 3 pieces)
***** check first post for updates
Last edited by esc; 05-16-2014 at 08:19 AM.
#6
Moderator
Thread Starter
iTrader: (6)
Join Date: Nov 2002
Location: North of Houston
Posts: 2,004
Likes: 0
Received 8 Likes
on
6 Posts
Car: '82 Camaro 11.7@121
Engine: 377
Transmission: 400
Axle/Gears: Dana 44 / 3.31:1
Re: Garage Sale (Stafford)
Sold - 91-92 rear spoiler
Edelbrock Victor Jr.
650 double pumper, fans and distributors
Edelbrock Victor Jr.
650 double pumper, fans and distributors
Last edited by esc; 05-16-2014 at 08:19 AM.
#7
Moderator
Thread Starter
iTrader: (6)
Join Date: Nov 2002
Location: North of Houston
Posts: 2,004
Likes: 0
Received 8 Likes
on
6 Posts
Car: '82 Camaro 11.7@121
Engine: 377
Transmission: 400
Axle/Gears: Dana 44 / 3.31:1
Re: Garage Sale (Stafford)
2 hatches, 55 Gal plastic barrels,
5 tail lights (2 different styles, 2.5 sets) (sold pair pictures here, still have another pair)
Sold - '82 Crossfire Z-28 working hood scoops
5 tail lights (2 different styles, 2.5 sets) (sold pair pictures here, still have another pair)
Sold - '82 Crossfire Z-28 working hood scoops
Last edited by esc; 05-16-2014 at 08:20 AM.
Trending Topics
#8
Moderator
Thread Starter
iTrader: (6)
Join Date: Nov 2002
Location: North of Houston
Posts: 2,004
Likes: 0
Received 8 Likes
on
6 Posts
Car: '82 Camaro 11.7@121
Engine: 377
Transmission: 400
Axle/Gears: Dana 44 / 3.31:1
Re: Garage Sale (Stafford)
Sold - Bottom of '82 Crossfire Z-28 working hood scoops
complete Tuned Port Injection (2 complete sets) + an extra base plate with the old style angled center bolt holes
Sold - Painless wiring harness and computer for TPI
complete Tuned Port Injection (2 complete sets) + an extra base plate with the old style angled center bolt holes
Sold - Painless wiring harness and computer for TPI
Last edited by esc; 05-16-2014 at 08:20 AM.
#9
Moderator
Thread Starter
iTrader: (6)
Join Date: Nov 2002
Location: North of Houston
Posts: 2,004
Likes: 0
Received 8 Likes
on
6 Posts
Car: '82 Camaro 11.7@121
Engine: 377
Transmission: 400
Axle/Gears: Dana 44 / 3.31:1
Re: Garage Sale (Stafford)
Lighted rear view mirror+assorted AC hoses
BMR ram air scoops designed to fit in the holes in the front bumper of a Z-28, one with two holes (brake) one with one hole (intake)
Plastic racing seat with vinyl cover and adjustable brackets, never used, like new except for the dust.
This is all just a sample of all the third gen staff I've collected over 31 years.
I need to make some room, so make an offer on anything you are interested in.
BMR ram air scoops designed to fit in the holes in the front bumper of a Z-28, one with two holes (brake) one with one hole (intake)
Plastic racing seat with vinyl cover and adjustable brackets, never used, like new except for the dust.
This is all just a sample of all the third gen staff I've collected over 31 years.
I need to make some room, so make an offer on anything you are interested in.
#10
Member
iTrader: (1)
Join Date: Nov 2008
Location: mo city tx
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 rs vert
Engine: 305 tbi
Re: Garage Sale (Stafford)
Lighted rear view mirror+assorted AC hoses
BMR ram air scoops designed to fit in the holes in the front bumper of a Z-28, one with two holes (brake) one with one hole (intake)
Plastic racing seat with vinyl cover and adjustable brackets, never used, like new except for the dust.
This is all just a sample of all the third gen staff I've collected over 31 years.
I need to make some room, so make an offer on anything you are interested in.
BMR ram air scoops designed to fit in the holes in the front bumper of a Z-28, one with two holes (brake) one with one hole (intake)
Plastic racing seat with vinyl cover and adjustable brackets, never used, like new except for the dust.
This is all just a sample of all the third gen staff I've collected over 31 years.
I need to make some room, so make an offer on anything you are interested in.
#13
Senior Member
iTrader: (1)
Join Date: Jan 2009
Location: Houston TX
Posts: 959
Likes: 0
Received 0 Likes
on
0 Posts
Car: 02 SS
Engine: 408 TT (1108rw-93/m1)6700rpm
Transmission: TH400(slipping)
Axle/Gears: 12bolt/3.42(whines😠)
Re: Garage Sale (Stafford)
do u have a Camaro font fog light grille shell? iroc fog light grill shell
#14
Moderator
Thread Starter
iTrader: (6)
Join Date: Nov 2002
Location: North of Houston
Posts: 2,004
Likes: 0
Received 8 Likes
on
6 Posts
Car: '82 Camaro 11.7@121
Engine: 377
Transmission: 400
Axle/Gears: Dana 44 / 3.31:1
Re: Garage Sale (Stafford)
Do you mean the insert that goes in the hole in the bumper?
No I don't think that I have any of those.
No I don't think that I have any of those.
#16
Moderator
Thread Starter
iTrader: (6)
Join Date: Nov 2002
Location: North of Houston
Posts: 2,004
Likes: 0
Received 8 Likes
on
6 Posts
Car: '82 Camaro 11.7@121
Engine: 377
Transmission: 400
Axle/Gears: Dana 44 / 3.31:1
Re: Garage Sale (Stafford)
Good. The glass is pretty clean and not scratched up.
One has a white bottom panel with holes for a spoiler (spoiler not included).
The bottom panel for the other is the blue one attached to the high rise '92 spoiler (sold separately).
Sold Blue spoiler and hatch - one hatch remaining
One has a white bottom panel with holes for a spoiler (spoiler not included).
The bottom panel for the other is the blue one attached to the high rise '92 spoiler (sold separately).
Sold Blue spoiler and hatch - one hatch remaining
Last edited by esc; 05-16-2014 at 08:21 AM.
#17
Moderator
Thread Starter
iTrader: (6)
Join Date: Nov 2002
Location: North of Houston
Posts: 2,004
Likes: 0
Received 8 Likes
on
6 Posts
Car: '82 Camaro 11.7@121
Engine: 377
Transmission: 400
Axle/Gears: Dana 44 / 3.31:1
Re: Garage Sale (Stafford)
I'll be out at my shop this Saturday from Noon until 4:00 PM.
After that I'm going to the HFB meet at Texadelphia on Westhiemer.
Come on out and have a look.
PM me for location and my phone number.
After that I'm going to the HFB meet at Texadelphia on Westhiemer.
Come on out and have a look.
PM me for location and my phone number.
#18
Moderator
Thread Starter
iTrader: (6)
Join Date: Nov 2002
Location: North of Houston
Posts: 2,004
Likes: 0
Received 8 Likes
on
6 Posts
Car: '82 Camaro 11.7@121
Engine: 377
Transmission: 400
Axle/Gears: Dana 44 / 3.31:1
Re: Garage Sale (Stafford)
more pictures that people have asked for of specific parts:
#23
Member
Join Date: Jan 2010
Location: Pasadena, TX
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Formula
Engine: 350TBI
Transmission: 700r4
Axle/Gears: 2.73
Re: Garage Sale (Stafford)
Do you still have the MAF) TPI system with "painless" harness and computer
#24
Moderator
Thread Starter
iTrader: (6)
Join Date: Nov 2002
Location: North of Houston
Posts: 2,004
Likes: 0
Received 8 Likes
on
6 Posts
Car: '82 Camaro 11.7@121
Engine: 377
Transmission: 400
Axle/Gears: Dana 44 / 3.31:1
Re: Garage Sale (Stafford)
Sorry, the TPI harness and computer are sold. I still have two TPI intakes.
The '82 CFI hood scoop is sold.
The '92 chin spoiler is sold.
Two of the 5 tail lights are sold.
AC evaporator housing is sold.
The '82 CFI hood scoop is sold.
The '92 chin spoiler is sold.
Two of the 5 tail lights are sold.
AC evaporator housing is sold.
#28
Moderator
Thread Starter
iTrader: (6)
Join Date: Nov 2002
Location: North of Houston
Posts: 2,004
Likes: 0
Received 8 Likes
on
6 Posts
Car: '82 Camaro 11.7@121
Engine: 377
Transmission: 400
Axle/Gears: Dana 44 / 3.31:1
Re: Garage Sale (Stafford)
I still have both manifolds (base, runners, plenum) they include the throttle body, injectors, fuel rail and perhaps some sensors...I'll have to check.
#29
Member
Join Date: Jan 2010
Location: Pasadena, TX
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Formula
Engine: 350TBI
Transmission: 700r4
Axle/Gears: 2.73
Re: Garage Sale (Stafford)
the only sensor i would need is a maf. is it for newer style heads and whats the price tag?
Last edited by Foster382; 01-13-2014 at 08:04 PM.
#30
Moderator
Thread Starter
iTrader: (6)
Join Date: Nov 2002
Location: North of Houston
Posts: 2,004
Likes: 0
Received 8 Likes
on
6 Posts
Car: '82 Camaro 11.7@121
Engine: 377
Transmission: 400
Axle/Gears: Dana 44 / 3.31:1
Re: Garage Sale (Stafford)
No luck there...
I have 2 base plates for the newer heads and one for the older.
$75.00 for the base, runners, plenum, T.B., injectors (for what there worth) and fuel rails.
I have 2 base plates for the newer heads and one for the older.
$75.00 for the base, runners, plenum, T.B., injectors (for what there worth) and fuel rails.
#32
#34
Moderator
Thread Starter
iTrader: (6)
Join Date: Nov 2002
Location: North of Houston
Posts: 2,004
Likes: 0
Received 8 Likes
on
6 Posts
Car: '82 Camaro 11.7@121
Engine: 377
Transmission: 400
Axle/Gears: Dana 44 / 3.31:1
Re: Garage Sale (Stafford)
Yes.
Do you want to go meet me out there this afternoon (Sunday)?
Do you want to go meet me out there this afternoon (Sunday)?
#37
Member
Join Date: Jan 2010
Location: Pasadena, TX
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Formula
Engine: 350TBI
Transmission: 700r4
Axle/Gears: 2.73
#38
Moderator
Thread Starter
iTrader: (6)
Join Date: Nov 2002
Location: North of Houston
Posts: 2,004
Likes: 0
Received 8 Likes
on
6 Posts
Car: '82 Camaro 11.7@121
Engine: 377
Transmission: 400
Axle/Gears: Dana 44 / 3.31:1
Re: Garage Sale (Stafford)
I don't really know.
I believe that one set came off of a 350, but I don't know which.
I believe that one set came off of a 350, but I don't know which.
#39
Moderator
Thread Starter
iTrader: (6)
Join Date: Nov 2002
Location: North of Houston
Posts: 2,004
Likes: 0
Received 8 Likes
on
6 Posts
Car: '82 Camaro 11.7@121
Engine: 377
Transmission: 400
Axle/Gears: Dana 44 / 3.31:1
Re: Garage Sale (Stafford)
OK, last call on this stuff.
If there is anything that you want, speak up now.
No reasonable offer will be refused.
If there is anything that you want, speak up now.
No reasonable offer will be refused.
#43
Moderator
Thread Starter
iTrader: (6)
Join Date: Nov 2002
Location: North of Houston
Posts: 2,004
Likes: 0
Received 8 Likes
on
6 Posts
Car: '82 Camaro 11.7@121
Engine: 377
Transmission: 400
Axle/Gears: Dana 44 / 3.31:1
Re: Garage Sale (Stafford)
Yes.
About 1/3 of it.
I still have a couple of TPI setups (- harness, computer and most sensors).
About 1/3 of it.
I still have a couple of TPI setups (- harness, computer and most sensors).
#44
Moderator
Thread Starter
iTrader: (6)
Join Date: Nov 2002
Location: North of Houston
Posts: 2,004
Likes: 0
Received 8 Likes
on
6 Posts
Car: '82 Camaro 11.7@121
Engine: 377
Transmission: 400
Axle/Gears: Dana 44 / 3.31:1
Re: Garage Sale (Stafford)
I just updated a bunch of posts to say what is sold and what isn't.
#45
Senior Member
Join Date: May 2011
Location: Houston,Texas
Posts: 549
Likes: 0
Received 1 Like
on
1 Post
Car: 1992 Camaro (Z28 Clone)
Engine: LB9|TPI
Transmission: 700R4
Axle/Gears: 2.73
Re: Garage Sale (Stafford)
Im definitely interested in the TPI setup... Preferably one that came off of a speed density setup if you have one.
#46
Moderator
Thread Starter
iTrader: (6)
Join Date: Nov 2002
Location: North of Houston
Posts: 2,004
Likes: 0
Received 8 Likes
on
6 Posts
Car: '82 Camaro 11.7@121
Engine: 377
Transmission: 400
Axle/Gears: Dana 44 / 3.31:1
Re: Garage Sale (Stafford)
I don't think that either is SD.
I have 2 straight (center manifold) bolt base plates and one, old style, angle bolt base plate.
Otherwise, I think that one was a 9th injector (1985) version and the other was from 1987 or 88.
I have 2 straight (center manifold) bolt base plates and one, old style, angle bolt base plate.
Otherwise, I think that one was a 9th injector (1985) version and the other was from 1987 or 88.
Thread
Thread Starter
Forum
Replies
Last Post
Hotrodboba400
Firebirds for Sale
3
12-10-2019 07:07 PM
84 TA NV
Firebirds for Sale
1
09-06-2015 08:02 PM
IROCZDAVE (88-L98)
Exterior Parts for Sale
0
09-06-2015 06:23 AM