Can you use a 2 pc crank in a 1 pc block??
09-28-2001, 01:59 PM
#1
Member
Thread Starter
Join Date: Jul 1999
Location: WPB, Florida
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Camaro RS
Engine: 5.7
Transmission: T-5
Can you use a 2 pc crank in a 1 pc block??
I found a scat 9000 3.8 stroke crank (388) but it's for a 2 piece rear main. Can I use it in my 1 piece block?
------------------
My Website
92 RS, 350, Street & Performance MPFI, TFS heads, Stock crank and rods, Fordged flat tops,
Crane Rollers,
MSD Digital 6 Plus, 22lb injectors,
ZZ3 cam, Edelbrock Headers 1 5/8, 3" Exhaust,
Hi Flow 3" Cat, stock T-5,
stock rear 3.08, koni yellow adjustable front, twin turbo glass hood, T-tops, Auto Meter Ultra Lite Series 2 5/8 gauges, Teal Green
Est. 365Hp 420+Lbs.
------------------
My Website
92 RS, 350, Street & Performance MPFI, TFS heads, Stock crank and rods, Fordged flat tops,
Crane Rollers,
MSD Digital 6 Plus, 22lb injectors,
ZZ3 cam, Edelbrock Headers 1 5/8, 3" Exhaust,
Hi Flow 3" Cat, stock T-5,
stock rear 3.08, koni yellow adjustable front, twin turbo glass hood, T-tops, Auto Meter Ultra Lite Series 2 5/8 gauges, Teal Green
Est. 365Hp 420+Lbs.
09-28-2001, 04:40 PM
#2
Member
Join Date: Feb 2001
Location: I'm a reasonable man, get off my case.
Posts: 230
Likes: 0
Received 0 Likes
on
0 Posts
i dont think so. I am building a 355 right now on an 87 block which is a 1 pc and the speed shop ordered a 2 pc by mistake and i had to return it so they could get me the right one. Their might be a way to do but not that i know of.
------------------
'89 firebird formula tpi
custom cold air,gutted maf(just screens),52mm tb,ported plenum,edelbrock runners and base,headers with 3" catback,tb coolant bypass,afpr@44 psi,msd 6a w\blasterII coil,3.73 posi,sf connectors and corvette servo
------------------
'89 firebird formula tpi
custom cold air,gutted maf(just screens),52mm tb,ported plenum,edelbrock runners and base,headers with 3" catback,tb coolant bypass,afpr@44 psi,msd 6a w\blasterII coil,3.73 posi,sf connectors and corvette servo
09-28-2001, 05:39 PM
#3
Supreme Member
Join Date: Mar 2001
Location: Monticello, IN USA
Posts: 1,346
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1991 Z-28
Engine: 350
Transmission: T-5 (gonna buy the farm)
Yeah you can use a 2pc. crank in a 1pc. block, but you have to get an adapter. I know Chevrolet makes them, I think Moroso does also. Summit or Jegs should have them. They are not very cheap either.
------------------
Joshua Johnston
1991 Z-28
350, T-5, K&N, Ported Vortec heads, Edelbrock RPM, Holley 750 D.P., HEI, 11.07:1 CR, Comp Cams Roller-.510"/.520"-282*/288* dur., Shorty Headers, Dual 2.5 Exhaust,Dynomax Bullet Mufflers, T&R Motorsports custom air intake
------------------
Joshua Johnston
1991 Z-28
350, T-5, K&N, Ported Vortec heads, Edelbrock RPM, Holley 750 D.P., HEI, 11.07:1 CR, Comp Cams Roller-.510"/.520"-282*/288* dur., Shorty Headers, Dual 2.5 Exhaust,Dynomax Bullet Mufflers, T&R Motorsports custom air intake
09-28-2001, 05:43 PM
#4
TGO Supporter
you need moroso pn 710-38415 from jegs for around 140 dollars. 1-800-345-4545
------------------
ICON Motorsports
1st & 3rd
MM Black Diamond 538 F&AM
------------------
ICON Motorsports
1st & 3rd
MM Black Diamond 538 F&AM
Thread
Thread Starter
Forum
Replies
Last Post
