350 engine
#1
Junior Member
Thread Starter
Join Date: Jan 2008
Location: new york
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 Pontiac Trans Am
Engine: stock 305
350 engine
hello i got a 86 trans am currently
im going to be dropping a 350 in as soon as i build it
i already have the motor
but what is a good rebuild kit? that comes with new pistons, cam, all the goodies. and what kind of horsepower should i be lookin at?
thanks
kory
im going to be dropping a 350 in as soon as i build it
i already have the motor
but what is a good rebuild kit? that comes with new pistons, cam, all the goodies. and what kind of horsepower should i be lookin at?
thanks
kory
#2
Moderator
iTrader: (14)
Join Date: Mar 2000
Location: Littleton, CO USA
Posts: 43,169
Likes: 0
Received 35 Likes
on
34 Posts
Car: 82 Berlinetta/57 Bel Air
Engine: LS1/LQ4
Transmission: 4L60E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
Welcome aboard thirdgen.org.
What induction does the car have, carb or TPI?
There are plenty of good rebuild kit choices on summitracing.com, and I'm sure jegs.com.
Not sure what you mean by the horsepower question.
What induction does the car have, carb or TPI?
There are plenty of good rebuild kit choices on summitracing.com, and I'm sure jegs.com.
Not sure what you mean by the horsepower question.
#3
Member
Join Date: Jan 2004
Location: costa mesa/A.D. the largest Emirate
Posts: 339
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 Formula 350
Engine: 5----->.7 or so they say
Transmission: seven hundred with a remainder of 4
Axle/Gears: 9 bolt 3.27
Re: 350 engine
86,
Hey there. What would your car be used for... daily driver... hot street... strip machine? Hope your trans is in good shape and that you matched up the torque converter to your build.
Welcome to the site. There is allot of useful information along with very experienced board members. If you do a search and/or post a question i'm sure you can find the solutions your looking for.
Rabi C.
Hey there. What would your car be used for... daily driver... hot street... strip machine? Hope your trans is in good shape and that you matched up the torque converter to your build.
Welcome to the site. There is allot of useful information along with very experienced board members. If you do a search and/or post a question i'm sure you can find the solutions your looking for.
Rabi C.
#4
Junior Member
Thread Starter
Join Date: Jan 2008
Location: new york
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 Pontiac Trans Am
Engine: stock 305
Re: 350 engine
my car would most likely be for street and strip and a little street racin haha i am a 18 year old boy so i like the burnouts too
im going to use the tpi too.
a little about my car
got it about 2 years ago
already done a paint job
and full decal kits
dont have a current pic with my pheonix or anything but here is one from when i purchased the car from a friend of the family
im going to use the tpi too.
a little about my car
got it about 2 years ago
already done a paint job
and full decal kits
dont have a current pic with my pheonix or anything but here is one from when i purchased the car from a friend of the family
Thread
Thread Starter
Forum
Replies
Last Post
theshackle
Tech / General Engine
4
03-05-2017 06:37 PM
NinjaNife
Tech / General Engine
27
08-23-2015 11:49 AM