CNC Super Victor Vs. Super Victor
#4
Supreme Member
iTrader: (3)
Re: CNC Super Victor Vs. Super Victor
Sounds like a serious build. I would do a lot of research and make sure the cross sectional area of the CNC version is best for your motor and how the intake manifold matches up to your heads. You may be better off getting the regular intake manifold and have it professionally ported to match your motor and heads.
Having the wrong intake manifold can keep you from making the power you should. It sounds like you have a nice strong build in the making. I know on a regular Super Victor one of the things they do is open up the plenum so that all cylinders get equal feeding from the plenum. You might compare the plenum area of the two.
Having the wrong intake manifold can keep you from making the power you should. It sounds like you have a nice strong build in the making. I know on a regular Super Victor one of the things they do is open up the plenum so that all cylinders get equal feeding from the plenum. You might compare the plenum area of the two.
Thread
Thread Starter
Forum
Replies
Last Post
no green
Engine/Drivetrain/Suspension Parts for Sale
11
01-09-2016 09:22 PM
bigjay89gta
Engine/Drivetrain/Suspension Parts for Sale
12
10-15-2015 08:04 AM
Dragonsys
Engine/Drivetrain/Suspension Parts for Sale
2
09-25-2015 03:51 PM