tbi to ls6 top end
04-28-2010, 10:33 AM
#1
Junior Member
Thread Starter
Join Date: Apr 2010
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
tbi to ls6 top end
so i have a 350 tbi outa an 88 truck and i was wondering if any body heard about swapping the heads and intake manifold over to an ls1 or ls6 setup. i need a new ecm and harness anyway cause the 92 firebird i wana put it in is a 6cy. i was planning on switchin to coil packs. i dunno if if it will work out but seems like a decent project. everywere iv looked i couldnt find anything sayin the bottom end was any different. couple words of wisdom would be great thanks.
04-28-2010, 10:43 AM
#2
Senior Member
Join Date: Jun 2005
Location: Savannah GA
Posts: 502
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 IROC
Engine: 355" TPI
Transmission: 700R4
Axle/Gears: 3.42
Re: tbi to ls6 top end
so i have a 350 tbi outa an 88 truck and i was wondering if any body heard about swapping the heads and intake manifold over to an ls1 or ls6 setup. i need a new ecm and harness anyway cause the 92 firebird i wana put it in is a 6cy. i was planning on switchin to coil packs. i dunno if if it will work out but seems like a decent project. everywere iv looked i couldnt find anything sayin the bottom end was any different. couple words of wisdom would be great thanks.
Thread
Thread Starter
Forum
Replies
Last Post
