need oil pan for 350
#1
need oil pan for 350
hi guys
am building a 350 from scratch and i need a oil pan 5litter or more but 7"1/2 deep that also pass over the cross member for a camaro 1985 if any of you have brand name and part number would be great
i ask the local shop here in canada and it closing on dec 10 and the guy was not sure if those that we look will pass over the cross member so i dont want to take any chance i prefer asking you guys since you all have a good experience with that type car and... it also cost around 255 to 300$ lol for none chrome
thx
am building a 350 from scratch and i need a oil pan 5litter or more but 7"1/2 deep that also pass over the cross member for a camaro 1985 if any of you have brand name and part number would be great
i ask the local shop here in canada and it closing on dec 10 and the guy was not sure if those that we look will pass over the cross member so i dont want to take any chance i prefer asking you guys since you all have a good experience with that type car and... it also cost around 255 to 300$ lol for none chrome
thx
#2
Supreme Member
iTrader: (8)
Join Date: Oct 2001
Location: Il
Posts: 11,692
Received 746 Likes
on
505 Posts
Car: 1989-92 FORMULA350 305 92 Hawkclone
Engine: 4++,350 & 305 CIs
Transmission: 700R4 4800 vig 18th700R4 t56 ZF6 T5
Axle/Gears: 3.70 9"ford alum chunk,dana44,9bolt
Re: need oil pan for 350
Need to know if your motor is a 1 piece or 2 piece rearmain seal.
#3
Supreme Member
iTrader: (1)
Join Date: Sep 2005
Posts: 26,037
Received 1,666 Likes
on
1,264 Posts
Car: Yes
Engine: Usually
Transmission: Sometimes
Axle/Gears: Behind me somewhere
Re: need oil pan for 350
And whether left- or right-side dipstick, if 2-pc.
There's little reason for most people to need anything beyond a stock pan. IMO if you're at the level where you seem to be based on your question, the stock pan for Camaro, Chevelle, or Monte Carlo of the year appropriate to your block, will do everything you need.
I would pay extra money to AVOID chrome, if I had to.
There's little reason for most people to need anything beyond a stock pan. IMO if you're at the level where you seem to be based on your question, the stock pan for Camaro, Chevelle, or Monte Carlo of the year appropriate to your block, will do everything you need.
I would pay extra money to AVOID chrome, if I had to.
#4
Re: need oil pan for 350
it not the stock engine from my camaro the 350 came from a milk truck in the years of 80-85 casting number 14010207
i was told that if i keep the engine rev pass 5000rpm am going to need more oil thats the reason why
am going to pass by the scrap yard today and see on witch side is the dip stick is
i was told that if i keep the engine rev pass 5000rpm am going to need more oil thats the reason why
am going to pass by the scrap yard today and see on witch side is the dip stick is
#6
Supreme Member
iTrader: (1)
Join Date: Sep 2005
Posts: 26,037
Received 1,666 Likes
on
1,264 Posts
Car: Yes
Engine: Usually
Transmission: Sometimes
Axle/Gears: Behind me somewhere
Re: need oil pan for 350
Get the pan for 82-85 Camaro/Firebird 305.
The stock pan will be fine.
I'd recommend new, not junkyard.
The stock pan will be fine.
I'd recommend new, not junkyard.
#7
Re: need oil pan for 350
Trending Topics
#8
Supreme Member
iTrader: (1)
Join Date: Sep 2005
Posts: 26,037
Received 1,666 Likes
on
1,264 Posts
Car: Yes
Engine: Usually
Transmission: Sometimes
Axle/Gears: Behind me somewhere
Re: need oil pan for 350
Should do the trick, as long as it has the baffle tray.
Check here:
http://www.rockauto.com/en/catalog/c...e,oil+pan,5562
Check here:
http://www.rockauto.com/en/catalog/c...e,oil+pan,5562