LT1 remote thermostat housing
02-06-2003, 12:42 PM
#1
Senior Member
Thread Starter
iTrader: (2)
Join Date: Feb 2001
Location: Hinesville, GA USA
Posts: 938
Likes: 0
Received 1 Like
on
1 Post
Car: '86 IROC-Z/'94 Z28
Engine: 350 LT1/382 LT1
Transmission: 4L60-E/T-56
Axle/Gears: 3.45/3.42 (soon 4.10)
LT1 remote thermostat housing
What size ports do the thermostat housings have to have to work? I found one in Speedway for $34.95, which looks the same as the one in summit, and it says it has 3 1/2" NPT ports. Sound like it'll work? Part number is 805-7134, sounds like Weiand.
02-06-2003, 06:59 PM
#2
Supreme Member
iTrader: (1)
Join Date: Feb 2000
Location: Savannah, GA
Posts: 2,361
Likes: 0
Received 1 Like
on
1 Post
Car: 1997 Jeep Wrangler
Engine: 4.0L
Transmission: 5 speed
Axle/Gears: 8.8 rear, 4.56 gears, 4:1 transfer
That's a great price, it is a Weiand part number too. It is their unpolished housing. You can add a "P" to the end for the polished version.
I stopped useing Weiand because of availablity or lack of really, especially the polished version. I know use only Offenhouser because they are more available.
Both housing have three 1/2" NPT holes in the side. The Offenhouser housing also has one 1/4" NPT hole as well. I enlarge it to 3/8" NPT for the CTS sensor when you get it through me.
I stopped useing Weiand because of availablity or lack of really, especially the polished version. I know use only Offenhouser because they are more available.
Both housing have three 1/2" NPT holes in the side. The Offenhouser housing also has one 1/4" NPT hole as well. I enlarge it to 3/8" NPT for the CTS sensor when you get it through me.
Thread
Thread Starter
Forum
Replies
Last Post
david068513
Engine/Drivetrain/Suspension Parts for Sale
1
09-13-2015 11:24 AM
