TPI Tuned Port Injection discussion and questions. LB9 and L98 tech, porting, tuning, and bolt-on aftermarket products.
Sponsored by:
Sponsored by:

Testing fuel pump out of car

Thread Tools
 
Search this Thread
 
Old 03-05-2005, 11:24 AM
  #1  
Senior Member
Thread Starter
 
91GTABird's Avatar
 
Join Date: Aug 2001
Location: Memphis, Tn
Posts: 972
Likes: 0
Received 0 Likes on 0 Posts
Car: 92' RS
Engine: 357
Transmission: TH350
Axle/Gears: 4.10
Testing fuel pump out of car

Im fixing to pull my fuel pump b/c of all the problems im having with 18psi fuel pressure.

When i get the pump out is there anyway to test it to make sure it is really bad?
Old 03-05-2005, 01:33 PM
  #2  
Moderator

 
Vader's Avatar
 
Join Date: Jan 2000
Posts: 19,349
Received 216 Likes on 177 Posts
It is going to be a little easier to test the pump in place.

The first thing to do is test the voltage as near the pump as you can. These pumps are quite sensitive to low voltage. Runnign the pump at 13.5V for the tests would be a good idea.

The next step would be to verify pum volume output. Make sure teh pump can deliver at least a full pint of fuel in less than 15 seconds.

If that passes, test the peak pressure by blocking the fuel return line from the FPR. Only test the pump briefly in this manner, since the dead-headed pump will be under considerable stress to make 65 PSIG or so.

If all that is in order, the pump is fine, and you have other problems, such as the regulator.
Old 03-05-2005, 05:18 PM
  #3  
Senior Member
Thread Starter
 
91GTABird's Avatar
 
Join Date: Aug 2001
Location: Memphis, Tn
Posts: 972
Likes: 0
Received 0 Likes on 0 Posts
Car: 92' RS
Engine: 357
Transmission: TH350
Axle/Gears: 4.10
Thanks Vador. I just dont think its the pump. Its 1 year old and it has the same nice high pitch *whine* as it did brand new. Im going tinker with it alittle more before i replace it. Im only getting 10-18psi sometimes its a steady 18psi and then sometimes it bounces real fast from 10-18psi steadily. Is it possible the regulator could staying open? Is it a good idea to run compressed air @50-80 psi throught the return line and sending line, forward and backwards?

This is the pump i had installed from O'reillys.

CARTER
CFP Electric Fuel Pump
1 per car. P74006 Each $75.99 N/A
TA - w/HIGH PERF - CHECK O.E. # REPLACEMENT OF WIRING HARNESS IS RECOMMENDED FOR PROPER ELECTRICAL CONNECTION LIMITED LIFETIME WARRANTY
Old 03-05-2005, 05:21 PM
  #4  
Senior Member
Thread Starter
 
91GTABird's Avatar
 
Join Date: Aug 2001
Location: Memphis, Tn
Posts: 972
Likes: 0
Received 0 Likes on 0 Posts
Car: 92' RS
Engine: 357
Transmission: TH350
Axle/Gears: 4.10
Carter Fuel Pump Pic
Old 03-12-2005, 11:07 AM
  #5  
Senior Member
Thread Starter
 
91GTABird's Avatar
 
Join Date: Aug 2001
Location: Memphis, Tn
Posts: 972
Likes: 0
Received 0 Likes on 0 Posts
Car: 92' RS
Engine: 357
Transmission: TH350
Axle/Gears: 4.10
i made something up to hook my pressure regulator to the sending line directly. im still only getting 10-20 psi sometimes it will fluctuate and some times its steady 18psi. Im in the process right now of pulling the pump. ill update you when im done.
Old 09-23-2005, 11:32 PM
  #6  
Junior Member

 
strider681's Avatar
 
Join Date: Jan 2002
Posts: 98
Likes: 0
Received 0 Likes on 0 Posts
Car: '87 Pontiac Trans Am GTA
Engine: 350 5.7L TPI (L98)
Transmission: 700R4
did you ever get the pump replaced? I am having similar problems and am going to replace my pump soon. any tips?
Old 09-25-2005, 04:41 PM
  #7  
Senior Member
Thread Starter
 
91GTABird's Avatar
 
Join Date: Aug 2001
Location: Memphis, Tn
Posts: 972
Likes: 0
Received 0 Likes on 0 Posts
Car: 92' RS
Engine: 357
Transmission: TH350
Axle/Gears: 4.10
Yep. Heres the post to it. Fuel Pump Acces
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
RazorN8
Tech / General Engine
4
01-07-2022 11:44 AM
theshackle
Tech / General Engine
4
03-05-2017 06:37 PM
beachrodder
Tech / General Engine
7
08-25-2015 08:05 AM
Kaweh
TBI
3
08-09-2015 02:54 PM



Quick Reply: Testing fuel pump out of car



All times are GMT -5. The time now is 11:33 AM.