1987 Supercharged TPI w/ megasquirt/complete repaint build thread
#201
Moderator
Re: 1987 Supercharged TPI w/ megasquirt/complete repaint build thread
I really don'r mean to take this off topic, but can you even run propane with a supercharger?
#205
Junior Member
Join Date: Aug 2004
Location: Glen Rock, PA
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro Z-28
Engine: 305 TPI
Transmission: Automatic
Axle/Gears: 2.73:1
Re: 1987 Supercharged TPI w/ megasquirt/complete repaint build thread
Incredible build. Way to take what someone else had only scratched the surface on and made it all yours. Very tastefully done.
#206
Re: 1987 Supercharged TPI w/ megasquirt/complete repaint build thread
Updates:
1) oil leak: was a hole in the oil filter from the slave bracket!
2) did a small photoshoot!
https://www.thirdgen.org/forums/memb...around-eh.html
3) Pulled the T56 from the T/A. I need to save for a clutch/flywheel(special) and new hydralics now....
4)9" progress!!!! Exciting news here.
The lower control arm mounts has the 2 lower positions incorporated into them like the aftermarket relocation mounts. Shock mounts have a lower position also.
Finally, got a header leak, well a collecter and exhaust came unbolted leak, and get back to tuning. Almost have the SC braced enough and all the oil leaks fixed(Damned SBCs!)
1) oil leak: was a hole in the oil filter from the slave bracket!
2) did a small photoshoot!
https://www.thirdgen.org/forums/memb...around-eh.html
3) Pulled the T56 from the T/A. I need to save for a clutch/flywheel(special) and new hydralics now....
4)9" progress!!!! Exciting news here.
The lower control arm mounts has the 2 lower positions incorporated into them like the aftermarket relocation mounts. Shock mounts have a lower position also.
Finally, got a header leak, well a collecter and exhaust came unbolted leak, and get back to tuning. Almost have the SC braced enough and all the oil leaks fixed(Damned SBCs!)
#211
Supreme Member
iTrader: (2)
Join Date: Nov 1999
Location: Monroe,NC
Posts: 1,779
Likes: 0
Received 20 Likes
on
15 Posts
Car: 90 Formula
Engine: 305
Transmission: 700R4
Axle/Gears: 9 bolt/3.27
Re: 1987 Supercharged TPI w/ megasquirt/complete repaint build thread
You gonna have that monster at Auto Fair this weekend?
#212
Member
Join Date: Mar 2011
Location: Union City, CA
Posts: 114
Likes: 0
Received 1 Like
on
1 Post
Car: 1992 Camaro RS
Engine: L98 5.7 350
Transmission: 700R4
Re: 1987 Supercharged TPI w/ megasquirt/complete repaint build thread
I just realized..I have sportlines too but my stance is no where like yours..is there anything else going on in your suspension to get that stance?
#214
Supreme Member
iTrader: (2)
Join Date: Nov 1999
Location: Monroe,NC
Posts: 1,779
Likes: 0
Received 20 Likes
on
15 Posts
Car: 90 Formula
Engine: 305
Transmission: 700R4
Axle/Gears: 9 bolt/3.27
Re: 1987 Supercharged TPI w/ megasquirt/complete repaint build thread
I did, car was awesome! Had to walk a country mile from pit row to where you were at to see it but worth it. Pictures don't do it justice, great work. Did you go back for Sunday?
#215
Re: 1987 Supercharged TPI w/ megasquirt/complete repaint build thread
Thanks, IF it was back "in the show" I had already left for a wedding
Unfortunately I had to replace the torque arm in the parking lot before I brought it over there, due to a burnout loading it into the car trailer...
Here are a couple pictures from Charlotte
#221
Member
iTrader: (2)
Join Date: Sep 2010
Location: Birmingham, AL
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Camaro Z28 Clone
Engine: Bored .030, vortec sbc350
Transmission: Built T5 WC
Axle/Gears: 1999 Torsen 4:10 Locker
Re: 1987 Supercharged TPI w/ megasquirt/complete repaint build thread
That car is stupid. Just give me the keys I'll put it out of its misery by just DDing it.
BEA-UTIFUL CAR! Love this thread!
BEA-UTIFUL CAR! Love this thread!
#222
Member
iTrader: (1)
Join Date: Sep 2005
Location: St.Amant, La.
Posts: 315
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 IROC
Engine: L98
Transmission: 700R4
Axle/Gears: 3.42 Auburn
Re: 1987 Supercharged TPI w/ megasquirt/complete repaint build thread
Man I wish copy and paste worked in real life cuz I'd copy ur car overtop of mine!
#225
Member
iTrader: (1)
Join Date: Sep 2005
Location: St.Amant, La.
Posts: 315
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 IROC
Engine: L98
Transmission: 700R4
Axle/Gears: 3.42 Auburn
Re: 1987 Supercharged TPI w/ megasquirt/complete repaint build thread
You should definitely get nominated for car of the month, and win!
#227
Supreme Member
Join Date: Feb 2002
Location: miami, florida
Posts: 1,843
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1987 Supercharged TPI w/ megasquirt/complete repaint build thread
I love the 9" setup. Did you fab all that yourself? Also, where did you get the brackets for it?
Also, how do the wheels fit? Any rubbing issues?
Also, how do the wheels fit? Any rubbing issues?
#229
Member
iTrader: (1)
Join Date: Sep 2005
Location: St.Amant, La.
Posts: 315
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 IROC
Engine: L98
Transmission: 700R4
Axle/Gears: 3.42 Auburn
Re: 1987 Supercharged TPI w/ megasquirt/complete repaint build thread
It's the one thing u never want to use, a toe hook since the car is to low to attach a strap to the factory hooks without damaging the chin spoiler.
#231
Re: 1987 Supercharged TPI w/ megasquirt/complete repaint build thread
Thanks again everyone. I haven't noticed any new replies here.
-The rear was pulled from a junkyard by "DeanJ" on here. He then stripped all of the factory brackets and used an old 10 bolt for the brackets. He cut them off and then welded them to the new one. Looks GREAT! The T/A is also all custom made by him. It is SO stout. The only thing I'm looking at is how to get the T/A mounted on the transmission.
-The piece on the front is a tow hook(that actually works!). I have pulled it over a mile straight with no adverse affects!
-Wheels fit GREAT. VERY slight rub on the front two at fulllock only on the inner fenders. When I say minor, I mean minor. I would go with this size if I had to do it again!
-I'd love to be COTM!!
-The rear was pulled from a junkyard by "DeanJ" on here. He then stripped all of the factory brackets and used an old 10 bolt for the brackets. He cut them off and then welded them to the new one. Looks GREAT! The T/A is also all custom made by him. It is SO stout. The only thing I'm looking at is how to get the T/A mounted on the transmission.
-The piece on the front is a tow hook(that actually works!). I have pulled it over a mile straight with no adverse affects!
-Wheels fit GREAT. VERY slight rub on the front two at fulllock only on the inner fenders. When I say minor, I mean minor. I would go with this size if I had to do it again!
-I'd love to be COTM!!
#232
Senior Member
iTrader: (5)
Join Date: Feb 2008
Location: oklahoma
Posts: 932
Likes: 0
Received 0 Likes
on
0 Posts
Car: 02wrx/88 rs
Engine: 2.0L turbo/nothing yet!
Transmission: 4eat/waiting on a t56
Axle/Gears: 3.73
Re: 1987 Supercharged TPI w/ megasquirt/complete repaint build thread
Thanks again everyone. I haven't noticed any new replies here.
-The rear was pulled from a junkyard by "DeanJ" on here. He then stripped all of the factory brackets and used an old 10 bolt for the brackets. He cut them off and then welded them to the new one. Looks GREAT! The T/A is also all custom made by him. It is SO stout. The only thing I'm looking at is how to get the T/A mounted on the transmission.
-The piece on the front is a tow hook(that actually works!). I have pulled it over a mile straight with no adverse affects!
-Wheels fit GREAT. VERY slight rub on the front two at fulllock only on the inner fenders. When I say minor, I mean minor. I would go with this size if I had to do it again!
-I'd love to be COTM!!
-The rear was pulled from a junkyard by "DeanJ" on here. He then stripped all of the factory brackets and used an old 10 bolt for the brackets. He cut them off and then welded them to the new one. Looks GREAT! The T/A is also all custom made by him. It is SO stout. The only thing I'm looking at is how to get the T/A mounted on the transmission.
-The piece on the front is a tow hook(that actually works!). I have pulled it over a mile straight with no adverse affects!
-Wheels fit GREAT. VERY slight rub on the front two at fulllock only on the inner fenders. When I say minor, I mean minor. I would go with this size if I had to do it again!
-I'd love to be COTM!!
Mount it to crossmember you will brake trans if mounted there. Spike_z modified his to work for long tube. Very similar to your setup
#234
Member
Join Date: Sep 2011
Location: P.A.
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 T/A w/WS6
Engine: 5.7L V8 TPI
Transmission: 700r4
Axle/Gears: 3.23 w/ posi
Re: 1987 Supercharged TPI w/ megasquirt/complete repaint build thread
I really like what you've done with this car. I also really like the hood, overall very badass
#236
Member
Join Date: Mar 2012
Location: arnold, missouri
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 iroc
Engine: 305 tpi
Transmission: unknown atm
Axle/Gears: unknown atm
Re: 1987 Supercharged TPI w/ megasquirt/complete repaint build thread
Sorry you can't find a buyer for it but happy your not selling waiting for more updates
#237
Re: 1987 Supercharged TPI w/ megasquirt/complete repaint build thread
I think 9" and t56 are coming soon!
Just got put on the gmhightech page...
Check it out!
http://www.facebook.com/gmhightech
Just got put on the gmhightech page...
Check it out!
http://www.facebook.com/gmhightech
#238
COTM Editor
iTrader: (11)
Join Date: Mar 2006
Location: WINDSOR, CO
Posts: 4,098
Likes: 0
Received 12 Likes
on
12 Posts
Car: 91 Z28, 87 SC, 90 IROC, 92 RS
Engine: LS1, 305 TPI, L98, NADA
Transmission: T56, 700r4's, and NADA
Axle/Gears: 3.89, 3.42, 3.23, NADA
Re: 1987 Supercharged TPI w/ megasquirt/complete repaint build thread
I think 9" and t56 are coming soon!
Just got put on the gmhightech page...
Check it out!
http://www.facebook.com/gmhightech
Just got put on the gmhightech page...
Check it out!
http://www.facebook.com/gmhightech
#239
Supreme Member
iTrader: (17)
Re: 1987 Supercharged TPI w/ megasquirt/complete repaint build thread
I think 9" and t56 are coming soon!
Just got put on the gmhightech page...
Check it out!
http://www.facebook.com/gmhightech
Just got put on the gmhightech page...
Check it out!
http://www.facebook.com/gmhightech
#241
Supreme Member
Re: 1987 Supercharged TPI w/ megasquirt/complete repaint build thread
When my car grows up it wants to be just like yours Awesome car man
Last edited by pwdbychevy; 06-21-2012 at 08:42 PM.
#242
Supreme Member
iTrader: (9)
Join Date: Mar 2007
Location: Raleigh, NC
Posts: 1,804
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1988 Flame Red Trans am GTA
Engine: Forged 355 4 Bolt, FIRST TPI
Transmission: 700r4
Axle/Gears: ls1 torsen 3.42 gear
Re: 1987 Supercharged TPI w/ megasquirt/complete repaint build thread
i have seen this car in person about a week ago... and i must say... its one hell of a car...... i absolutely love the color and all the engine detail in the engine bay....
#248
Senior Member
iTrader: (2)
Join Date: May 2002
Location: Hollywood, FL
Posts: 504
Likes: 0
Received 0 Likes
on
0 Posts
Car: '88 Black GTA, T-tops, digital dash
Engine: 5.7 TPI w/custom chip
Transmission: 700R4
Axle/Gears: 9 bolt 327 posi
Re: 1987 Supercharged TPI w/ megasquirt/complete repaint build thread
I'm anxiously waiting for those pictures! Awesome build Nuffnuffz28. Great and very tasteful job!!!
#249
Member
iTrader: (3)
Join Date: Oct 2011
Location: Trumbull Country, Ohio
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1982 Z28
Engine: three 350s, all casting #370010
Re: 1987 Supercharged TPI w/ megasquirt/complete repaint build thread
Do you have any idea where that hood came from? Because I have one just like it that came off of my Camaro but its beat to trash. I never saw another hood like it until I saw your Camaro, so do you have any idea where it came from?
#250
Junior Member
Join Date: Nov 2010
Location: Canada
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 IROC
Engine: procharged stock 350 tpi
Transmission: stock 700-R-4
Axle/Gears: stock 3.27
Re: 1987 Supercharged TPI w/ megasquirt/complete repaint build thread
Awesome car
NufNuffZ28 !!!!
Please keep the pictures coming...and thanks for the ones already posted.
Great thread!
NufNuffZ28 !!!!
Please keep the pictures coming...and thanks for the ones already posted.
Great thread!