single to dual fan member help thread
11-16-2014, 07:30 PM
#1
single to dual fan member help thread
Im posting this to try to help a few members that have made the switch.
If the gray wire is wired to the ecm the ecm will control the secondary fan based off programing. a temp switch in the cylinder head is how tbi controls the secondary fan.
napa part numbers
MPE FS111SB On 245-Off 229
MPE FS112SB 229-Off 213
ECH FS111 On 220-Off 204
ECH FS112 On 229-Off 213
http://www.summitracing.com/parts/hyp-4028
http://www.summitracing.com/parts/hyp-4026
If the gray wire is wired to the ecm the ecm will control the secondary fan based off programing. a temp switch in the cylinder head is how tbi controls the secondary fan.
napa part numbers
MPE FS111SB On 245-Off 229
MPE FS112SB 229-Off 213
ECH FS111 On 220-Off 204
ECH FS112 On 229-Off 213
http://www.summitracing.com/parts/hyp-4028
http://www.summitracing.com/parts/hyp-4026
Thread
Thread Starter
Forum
Replies
Last Post
Brinkkl2000
Tech / General Engine
5
08-04-2018 08:29 AM
Linson
Auto Detailing and Appearance
40
08-21-2015 02:12 PM