BAd injector?
#1
Senior Member
Thread Starter
Join Date: Feb 2005
Location: Rochester,NY
Posts: 617
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1993 Caprice wagon "Shammoo"
Engine: tpi'd 406, with P4 ebl EBL 730 ECM
Transmission: custom "4L65" swap.
Axle/Gears: 3.42:1 with posi
BAd injector?
In dealing with mt tpi system, I was resetting a number of things like base timing idle, TPS, trying to track iraating behavior. I grabbed the infrared gun, checking exhaust tube temps.
Thoughout warm up and normal idle I noticd Cylinder #2 temps was a few hundred degrees colder than any other tube. While all others were around 600*, number 2 was around 300-350. I looking for causes, and suspect a clogged injector.
Would that make sense to you? any thoughts?
Thoughout warm up and normal idle I noticd Cylinder #2 temps was a few hundred degrees colder than any other tube. While all others were around 600*, number 2 was around 300-350. I looking for causes, and suspect a clogged injector.
Would that make sense to you? any thoughts?
Thread
Thread Starter
Forum
Replies
Last Post