shift kit question (does mine have one)
#1
Junior Member
Thread Starter
Join Date: Jun 2005
Location: WI
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 camaro RS
Engine: 350 bored 3 over, edelbrock 600cfm carb,Edelbrock Performer intake,
Transmission: 700R4, shift kit
shift kit question (does mine have one)
hey i bought a 700R4 tranny from a guy and he said it has a shift kit in it but is there a way i can make sure it does before i put it in my car because if it doesnt have one than i wont to buy on so please let me know.
#2
Supreme Member
Join Date: Dec 2003
Location: Newark, DE
Posts: 2,391
Likes: 0
Received 0 Likes
on
0 Posts
Car: '86 Camaro, '02 WRX, '87 K5, '67
Engine: 350 TPI, 2.0turbo, 383 in the works, 289-4BBL, 232, A-head 4-cylinder
Transmission: T56, 5-speed, 700R4, C4, T176, semi-auto 2-speed
Axle/Gears: 3.73, 3.90, 4.88, 3.55, 3.54, 7.00
Not easily. You'd have to pull the valvebody and seperator plate and see if either has been modified. You'll really have to know what you are looking at too. If it's a B&M kit you can check and see if the accumulators have been blocked solid with spacers (they use springs from the factory). TransGo kits don't do this though.
Thread
Thread Starter
Forum
Replies
Last Post