Transmissions and Drivetrain Need help with your trans? Problems with your axle?

Transmission gurus- 700r4 tcc solenoid with harness... which one

Thread Tools
 
Search this Thread
 
Old 07-22-2011, 10:49 AM
  #1  
Junior Member
Thread Starter
iTrader: (2)
 
elmo89's Avatar
 
Join Date: Apr 2010
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Transmission gurus- 700r4 tcc solenoid with harness... which one

No such thing as free. I was given a transmission for a project, but the tcc solenoid with harness was taken from it as well as a pressure switch. When I got the unit, It had a harness tossed in as well as a switch. The trans was removed from a 1990 chevy p/u, but had been built before and I'm not sure its the original trans from the truck to begin with.

All I'm lacking is the tcc solenoid with harness, and possibly the 3/4 pressure switch. I have put a picture of the valve body with the switch in question. disregard the harness thats on it. the switch is a 2 pin switch FWIW.

This is going on a 89 TPI setup as well.

I will gladly paypal 10.00 to the person who can give me the answer i need
Name:  valvebody.jpg
Views: 9021
Size:  100.5 KB
Old 07-22-2011, 10:58 AM
  #2  
Moderator

 
Apeiron's Avatar
 
Join Date: Jan 2000
Location: Mercedes Norte, Heredia, Costa Rica
Posts: 20,981
Likes: 0
Received 9 Likes on 8 Posts
Car: 1984 Z28 Hardtop
Engine: 383 Carb
Transmission: 4L60
Axle/Gears: 3.54 Dana 44
Re: Transmission gurus- 700r4 tcc solenoid with harness... which one

What's the question?
Old 07-22-2011, 11:10 AM
  #3  
Junior Member
Thread Starter
iTrader: (2)
 
elmo89's Avatar
 
Join Date: Apr 2010
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Re: Transmission gurus- 700r4 tcc solenoid with harness... which one

Originally Posted by Apeiron
What's the question?
which TCC solenoid with harness do I need.
also, is the 2 pin pressure switch correct
Old 07-22-2011, 11:36 AM
  #4  
Junior Member
iTrader: (2)
 
SystemX's Avatar
 
Join Date: Mar 2009
Location: Michigan
Posts: 49
Likes: 0
Received 0 Likes on 0 Posts
Car: 1989 Pontiac Trans Am GTA
Engine: 5.7L L98
Transmission: 700R4
Axle/Gears: 3.27:1
Re: Transmission gurus- 700r4 tcc solenoid with harness... which one

If you need the whole harness you'll have to go to your local transmission shop (or dealer/bone yard) to get one. If you just need the solenoid you can pick one up at the parts store and splice it in. The pressure switch you show is fine. I'm guessing the trans in the picture is not yours because it has the components you say you are lacking. Hope this helps.
Old 07-22-2011, 01:08 PM
  #5  
Junior Member
Thread Starter
iTrader: (2)
 
elmo89's Avatar
 
Join Date: Apr 2010
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Re: Transmission gurus- 700r4 tcc solenoid with harness... which one

Originally Posted by SystemX
If you need the whole harness you'll have to go to your local transmission shop (or dealer/bone yard) to get one. If you just need the solenoid you can pick one up at the parts store and splice it in. The pressure switch you show is fine. I'm guessing the trans in the picture is not yours because it has the components you say you are lacking. Hope this helps.
The one pictured is mine, but the solenoid is not correct, it was just one that was tossed in.
The problem with the dealer is they need year make model etc. They make like 11 different ones. I've been to two different trans shops and no luck. ( they suck around here)
Old 07-23-2011, 09:10 PM
  #6  
Supreme Member

 
Pro Built Automatics's Avatar
 
Join Date: Jul 1999
Location: Calimesa, California, U.S.
Posts: 3,458
Likes: 0
Received 39 Likes on 27 Posts
Re: Transmission gurus- 700r4 tcc solenoid with harness... which one

Use the wiring and the single prong (normally open) switch from the 1989 unit along with the temp switch that bolts to the valve body. The input shaft is not a V-8 setup. If it is, then this will not work in a V-8 setup. Is this a "small bellhousing" type?
Old 07-24-2011, 06:15 PM
  #7  
Junior Member
Thread Starter
iTrader: (2)
 
elmo89's Avatar
 
Join Date: Apr 2010
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Re: Transmission gurus- 700r4 tcc solenoid with harness... which one

Originally Posted by Pro Built Automatics
Use the wiring and the single prong (normally open) switch from the 1989 unit along with the temp switch that bolts to the valve body. The input shaft is not a V-8 setup. If it is, then this will not work in a V-8 setup. Is this a "small bellhousing" type?
VERY GOOD EYE!!!! Counted the splines, 27.... I talked to the buddy who built it, says he's gonna make it right. Found a harness, have it on order too. just need the two switches and can get it on the road.

got a pay pal addy?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Hotrodboba400
Firebirds for Sale
3
12-10-2019 07:07 PM
RyanJB
Members Firebirds
39
11-20-2018 03:30 PM
plm99
Southern California Area
5
11-16-2015 05:21 PM
Zeek1041
Theoretical and Street Racing
12
09-30-2015 11:00 AM
Hotrodboba400
Firebirds for Sale
0
09-02-2015 07:28 PM



Quick Reply: Transmission gurus- 700r4 tcc solenoid with harness... which one



All times are GMT -5. The time now is 10:26 PM.