C6 Wheels question
#2
Junior Member
Join Date: Dec 2009
Location: Whistler BC
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 trans am
Engine: 305 tpi
Transmission: 5 speed
Re: C6 Wheels question
Im running 17x8.5 wheels in the front 18x9.5 rear all on 2" ADAPTERS. Theres no such thing as a 2" spacer btw. The corvette c6 wheel has a 56mm offset this is why an adapter is needed. If you have a stock thirdgen rear end you need 2" adapters for the rear aswell. A lot of guys run a 4th gen rear end because the axel has +2" on each side, therefor they dont need to run spacers in the rear. So assuming you have have a stock rear end you will need spacers on all corners.
Hopefully this was helpful.
Hopefully this was helpful.
Thread
Thread Starter
Forum
Replies
Last Post