Aftermarket Product ReviewProvide questions and answers about aftermarket parts for the Third Generation F-Body.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
they are sold here at the local auto zone store, and there are also some performance stores that sell them. but im not sure where you could order them from or anything like that. try ebay.
they both sell them and are pretty much the largest 2 car parts stores in the country
__________________ 2011 chicago world of wheels placed in super street class
Best Engine '11 Thirdgenfest
Best Modified Camaro Thirdgenfest '05, '07, '11 Second place Camaro Modified '06, '08, & '10
MFBA March 2008 Featured Calendar Vehicle
They are called a-pillar pods. They will run under $25. Part number ATM-10201 for the single and ATM-10200 for the dual pod. Those are Summit's part numbers. Hell, you might as well ask the sales guy about the triple pods. They are not available anymore but i heard that they might come back for our cars. Don't know though. They also have free ground shipping. Good luck
auto meter makes two kinds.
a full pillar that holds one or two gauges and they also make a pod, this is just the housing for the gauge, u can see in the picture below that it is a little cheaper looking. my suggestion is to get the full pillar style w/ 2 gauges. they are 2.0625 gauges, your probly going to spend 60-100 a gauge so what the differnce between 25 for a pod to a pillar for a few more dallors. also the ful pillar verison is only for the hardtop.
Originally posted by wyclefsirocz auto meter makes two kinds.
a full pillar that holds one or two gauges and they also make a pod, this is just the housing for the gauge, u can see in the picture below that it is a little cheaper looking. my suggestion is to get the full pillar style w/ 2 gauges. they are 2.0625 gauges, your probly going to spend 60-100 a gauge so what the differnce between 25 for a pod to a pillar for a few more dallors. also the ful pillar verison is only for the hardtop.
I didn't see a full pillar version in their catalog or I could have skipped over that page, but that is a good way to go, I will look again. Also you are correct about the cost of the guages, for example my sport comp electric fuel pressure guage was $190 because it goes inside the vehicle and has a special sender, Nitrous pressure guage was $85 but I had to buy a 6 ft braided hose ($50) to install it, Trans temp was the cheapest ($39) but I had to fabricate a T-adapter into my trans lines. But I believe the guages are a good investment, in guages you kinda get what you pay for.
i went t there website cause i couldn't find my autometer book. ihttp://autometer.com/hp/2003_catalog/gaugeworks/16.htmllook down to the art where it says pillars, not pods. i don't know where you could get one, but email automeer and they might be able to tell you.
Originally posted by wyclefsirocz i went t there website cause i couldn't find my autometer book. ihttp://autometer.com/hp/2003_catalog/gaugeworks/16.htmllook down to the art where it says pillars, not pods. i don't know where you could get one, but email automeer and they might be able to tell you.
