| The Torsen diff will indeed fit the ~89+ 10 bolt rear axles. From approximately 89, the oem Auburn diff for the 10 bolts was made for 28 spline axles. Prior to 89, the 26 spline axles were used and won't go into teh Torsen diff. Therefore, your 10 bolt axle must be an 89+ to have the 28 spline shafts to fit the Torsen. Otherwise, you'd have to buy new axle shafts as well.
Another point, the 3.73's gears must be for a 3 series carrier which the Torsen is. There ares some 3.73's that are made to fit the 2 series carriers.
To verify spline count, you must pull an axle shaft and physically count the splines.
------------------
KevinP92Z
92 Z28 383 SLP cam,SLP headers,SLP 2ontheLeft,Trick Flow TW heads & pistons,Edelbrock base,Accel SuperRam,52mmTB,Scat Crank & forged ConnRods,MSD 6AL,SLP convertor,Baer 13/12" Track,Moser axles,Hotchkis,Genuine GM 3.42s,SLP HD Torsen,17x9" chrome SS rims
96T/A w/SLP Ram Air,SLP 2ontheLeft, Bilsteins, Baer, Hotchkis, Genuine GM, Torsen
76 4X4 Blazer 400TPI project
[This message has been edited by KevinP92Z (edited October 17, 2000).] | 
