Highest bid... :)
#1
Highest bid... :)
if i were to sell my 305 TPI with 90,000 miles on it out of my 1986 camaro including:
Block
Crank
Rods
Pistons
Oil Pan
Oil Pickup
Timing Cover
Timing Chain
Camshaft
Lifters
Pushrods
Complete Heads
Valve Covers
TPI Intake
TPI Runners
TPI Throttle Body
TPI Plenum
EGR Valve
Exhaust Manifolds
Water Pump
basically a full motor with wires and crap taken off, and not including stuff transferred during a motor swap...
all installed and put together, how much could i sell it for? (im not selling it now, i want to know a possible price)
thanks
(is this the board i should post it on?)
[This message has been edited by STL1994 (edited February 07, 2001).]
Block
Crank
Rods
Pistons
Oil Pan
Oil Pickup
Timing Cover
Timing Chain
Camshaft
Lifters
Pushrods
Complete Heads
Valve Covers
TPI Intake
TPI Runners
TPI Throttle Body
TPI Plenum
EGR Valve
Exhaust Manifolds
Water Pump
basically a full motor with wires and crap taken off, and not including stuff transferred during a motor swap...
all installed and put together, how much could i sell it for? (im not selling it now, i want to know a possible price)
thanks
(is this the board i should post it on?)
[This message has been edited by STL1994 (edited February 07, 2001).]
#2
Supreme Member
Join Date: Nov 2000
Location: So. Cal, L.A.
Posts: 1,069
Likes: 0
Received 1 Like
on
1 Post
Car: '88 Firebird Formula 350
Engine: Built 383 TPI
Transmission: Built 700r4
Axle/Gears: 9 bolt, 3.27:1 Posi
Probably only $500, max. That is if it is rebuildable, and someone wants it.
In my case, I have an '81 Elcamino with a V6, and I want to drop in a V8. I can only put a 305 in it because of smog, so that would be something that I would want.
But most people don't want a 305. They usually want to get rid of them.
------------------
'82 Firebird, dead stock, 9 bolt disc rear, over 200,000 miles and still going strong, more to come...
http://www.spinfrenzy.com/stingerssx...easures.html#4
In my case, I have an '81 Elcamino with a V6, and I want to drop in a V8. I can only put a 305 in it because of smog, so that would be something that I would want.
But most people don't want a 305. They usually want to get rid of them.
------------------
'82 Firebird, dead stock, 9 bolt disc rear, over 200,000 miles and still going strong, more to come...
http://www.spinfrenzy.com/stingerssx...easures.html#4
#4
Member
Join Date: Jul 1999
Location: Marshall,IL
Posts: 347
Likes: 0
Received 0 Likes
on
0 Posts
Car: 82 & 91 Firebird
Engine: 400 & 355
Transmission: TH350 & 700
Axle/Gears: 4:11 & 2.72
I just sold 83 305 For $50 I was doing good for around here. Only one person wanted it, Everyone else just laughed at me.
Later
John
------------------
82 Firebird,355,Cam 224/234, .466/.488,TH350 Tranny,650 HolleyDP,Hooker Headers(I.E. POS) Manual steering
Best 8th et 8.62@80mph.
NEW for 01
A 408,dart iron eagle heads,street dominator intake, 750 SD,cam 229/239, .497/.520, Also a big hole in the hood.
Shooting for 12's.
Later
John
------------------
82 Firebird,355,Cam 224/234, .466/.488,TH350 Tranny,650 HolleyDP,Hooker Headers(I.E. POS) Manual steering
Best 8th et 8.62@80mph.
NEW for 01
A 408,dart iron eagle heads,street dominator intake, 750 SD,cam 229/239, .497/.520, Also a big hole in the hood.
Shooting for 12's.
Thread
Thread Starter
Forum
Replies
Last Post
ERIC'86IROC
Tech / General Engine
1
11-21-2000 02:51 PM