Aftermarket Vendor Review Provide questions and comments about aftermarket part vendors for the Third Gen F-Body.

How long has your maddog tranny lasted?

Old 04-27-2006, 09:17 PM
  #1  
Supreme Member

Thread Starter
iTrader: (10)
 
MikeH's Avatar
 
Join Date: Jul 1999
Location: Fla
Posts: 1,780
Likes: 0
Received 2 Likes on 2 Posts
Car: 90 IROC
Engine: 406
Transmission: GMPP 93/4L60
Axle/Gears: 9 bolt 3.27
How long has your maddog tranny lasted?

Mine lasted 3 months...
MikeH is offline  
Old 04-27-2006, 10:17 PM
  #2  
Senior Member

iTrader: (5)
 
TKO500's Avatar
 
Join Date: Oct 2004
Location: Pelham, NH
Posts: 608
Likes: 0
Received 0 Likes on 0 Posts
Car: 91 B4C, 17 C7 GS, 16 Denali DMax
Engine: LS3, LS3, LML
Axle/Gears: 3.23, 3.42, 3.23
LOL... about 17 seconds.

My first one arrived with no forward gears.
Second one arrived with no overdrive

When I called him on the first one he wanted me to drop the valve body. I told him no way! After the second one he tried to say I was blowing them up but they were installed the day they arrived. He also claims I didnt have the TV cable adjusted properly.

Then he says "you have to trust me. if you open that tranny up you will find all the parts in that tranny i list. i am an honest man."

His trannies are junk and I was running a slightly modified 350TPI motor that wasnt making more than 300 horse.

Last edited by TKO500; 05-17-2006 at 10:10 PM.
TKO500 is offline  
Old 04-28-2006, 08:10 AM
  #3  
Supreme Member

Thread Starter
iTrader: (10)
 
MikeH's Avatar
 
Join Date: Jul 1999
Location: Fla
Posts: 1,780
Likes: 0
Received 2 Likes on 2 Posts
Car: 90 IROC
Engine: 406
Transmission: GMPP 93/4L60
Axle/Gears: 9 bolt 3.27
Mine lasted 3 months just after the warranty went out. The tranny Was grinding from second to third. They thought it was funny, i missed they warranty period. I had it pulled apart by a local builder and it was full of wornout used parts. Not even good used parts, they tech couldnt beleive it.

I made this post because i keep hearing these same stories. And at one time i gave them the thumbs up. I dont want others to suffer because of something i might have said.
MikeH is offline  
Old 04-29-2006, 10:57 AM
  #4  
Supreme Member

 
IROCZZ3's Avatar
 
Join Date: Aug 1999
Location: San Diego, CA
Posts: 1,053
Likes: 0
Received 2 Likes on 2 Posts
Car: 87 Buick GN
Engine: 3.8L (231 cid) V6
Transmission: 200-4R
Axle/Gears: 10 bolt G80/ 3.42
That sucks. I woulda thrown that tranny right through their front window like the old lady in those old azz Discount Tire commercials.
IROCZZ3 is offline  
Old 04-29-2006, 01:35 PM
  #5  
Member
 
Ray102386's Avatar
 
Join Date: Jan 2006
Location: Camp Lejeune, NC
Posts: 161
Likes: 0
Received 0 Likes on 0 Posts
Car: 83' Camaro
Engine: 355
Transmission: TH-350
Axle/Gears: Open...
Thank god i didnt buy one, i was contemplating it quite highly and couldnt fidn anyone to vouche for him in the positive attitude.
Ray102386 is offline  
Old 04-29-2006, 02:51 PM
  #6  
Supreme Member
 
V6sucker's Avatar
 
Join Date: Feb 2003
Posts: 1,287
Likes: 0
Received 0 Likes on 0 Posts
Car: a car being parted out
Engine: blown up
Transmission: in peices
find someone local. It's the only way to go.

I spent 4 months looking for someone local, only to find a guy not 3 blocks from my house that works out of an expanded garage behind his house.

did a GMC 4X4 700R with kevlar bands and the works for 690... 2 year warranty.
V6sucker is offline  
Old 04-29-2006, 04:25 PM
  #7  
Supreme Member

Thread Starter
iTrader: (10)
 
MikeH's Avatar
 
Join Date: Jul 1999
Location: Fla
Posts: 1,780
Likes: 0
Received 2 Likes on 2 Posts
Car: 90 IROC
Engine: 406
Transmission: GMPP 93/4L60
Axle/Gears: 9 bolt 3.27
Originally Posted by IROCZZ3
That sucks. I woulda thrown that tranny right through their front window like the old lady in those old azz Discount Tire commercials.
LOL... that thought did cross my mind! Ive mellowed out in my old age. twenty years ago i would have done just that.

Now i call it a lesson learned.
MikeH is offline  
Old 04-29-2006, 04:36 PM
  #8  
Supreme Member

Thread Starter
iTrader: (10)
 
MikeH's Avatar
 
Join Date: Jul 1999
Location: Fla
Posts: 1,780
Likes: 0
Received 2 Likes on 2 Posts
Car: 90 IROC
Engine: 406
Transmission: GMPP 93/4L60
Axle/Gears: 9 bolt 3.27
Originally Posted by Fast_25th
LOL... about 17 seconds.

My first one arrived with no forward gears.
Second one arrived with no overdrive
Third one arrived only because he wouldnt give me my money back so I sent AMEX after him and I got my money back and they never came to get the tranny.

When I called him on the first one he wanted me to drop the valve body. I told him no way! After the second one he tried to say I was blowing them up but they were installed the day they arrived.

Then he says "you have to trust me. if you open that tranny up you will find all the parts in that tranny i list. i am an honest man."

His trannies are junk and I was running a slightly modified 350TPI motor that wasnt making more than 300 horse.
Yeah he told me i must have the tv cable adjusted wrong.

The other thing that i never noticed was on ebay. the warranty was for one year. But when i went looking for my bill of sale. it stated 3 months...
MikeH is offline  
Old 04-29-2006, 07:00 PM
  #9  
Supreme Member
 
shaggy56's Avatar
 
Join Date: Apr 2002
Location: Armpit state
Posts: 1,119
Likes: 0
Received 0 Likes on 0 Posts
Car: 71 Nova
Engine: Superramed 383, Topline heads
Transmission: 700r4
Axle/Gears: 8.2 posi 3.08
If hes advertising 1 year thats false advertising. You should all report him to the BBB.
shaggy56 is offline  
Old 04-29-2006, 07:04 PM
  #10  
TGO Supporter

iTrader: (2)
 
92 Formula's Avatar
 
Join Date: Feb 2000
Location: Avatar: My 34' 1989 Scarab III w/ twin 454's (502's Started!)
Posts: 1,235
Likes: 0
Received 2 Likes on 2 Posts
Car: 1989 Wellcraft Scarab III
Engine: Twin 454's
Axle/Gears: Twin Mercruiser Bravo I's
Dana at Pro-Built is very good for those that are looking for a good trans. If you do a "Pro-Built" search you will find a LOT of positive experiences. And, yes, I do have a Pro-Built 700R4 and would/will purchase another from him.

HTH
92 Formula is offline  
Old 04-29-2006, 08:20 PM
  #11  
Supreme Member

Thread Starter
iTrader: (10)
 
MikeH's Avatar
 
Join Date: Jul 1999
Location: Fla
Posts: 1,780
Likes: 0
Received 2 Likes on 2 Posts
Car: 90 IROC
Engine: 406
Transmission: GMPP 93/4L60
Axle/Gears: 9 bolt 3.27
Originally Posted by 92 Formula
Dana at Pro-Built is very good for those that are looking for a good trans. If you do a "Pro-Built" search you will find a LOT of positive experiences. And, yes, I do have a Pro-Built 700R4 and would/will purchase another from him.

HTH
yes...i wouldnt hesitate to buy one from Dana. He is one of the best from what ive been told.

I have a GMPP 4L60 bought from a fellow member that im very happy with now.
MikeH is offline  
Old 05-10-2006, 03:14 AM
  #12  
Supreme Member

 
smokefan's Avatar
 
Join Date: Nov 2004
Location: Connecticut
Posts: 1,344
Likes: 0
Received 0 Likes on 0 Posts
Car: 86 IROC w/Danko bodykit, 1988 iroc vert, 1989 k1500 pickup 6" lift and 35" tires, 2002 chevy tahoe z71
Engine: 383 stealth ram, 305 tpi, 350 tbi, 5.3l
Transmission: T56, 700r4, 700r4, 4l460
damn my friend just purchased one from them. he put it in and frove the car back to his home and its been sitting for about 3 months with out being driven. i wonder how long his is going to last
smokefan is offline  
Old 05-12-2006, 06:26 AM
  #13  
Member
iTrader: (5)
 
LadyInRed's Avatar
 
Join Date: Dec 2004
Location: Summerville, SC
Posts: 150
Likes: 0
Received 0 Likes on 0 Posts
Car: 1984 Camaro Z28
Engine: 2000 LS1
Transmission: T56
Axle/Gears: Moser 12 bolt w/4.11's
a friend of mine bought one for his 99Z, i showed him all of these threads... now he is regretting it. the transmission is enroute now, too late to turn back.
LadyInRed is offline  
Old 05-17-2006, 10:09 PM
  #14  
Senior Member

iTrader: (5)
 
TKO500's Avatar
 
Join Date: Oct 2004
Location: Pelham, NH
Posts: 608
Likes: 0
Received 0 Likes on 0 Posts
Car: 91 B4C, 17 C7 GS, 16 Denali DMax
Engine: LS3, LS3, LML
Axle/Gears: 3.23, 3.42, 3.23
Originally Posted by LadyInRed
a friend of mine bought one for his 99Z, i showed him all of these threads... now he is regretting it. the transmission is enroute now, too late to turn back.
Well just beware of his famous lines which I posted in my thread above here. If he calls him saying there is a problem with it, he will tell you the TV cable is misadjusted.

Hopefully he paid for it with a credit card. They offer the best buyer protection there is.
TKO500 is offline  
Old 05-18-2006, 07:33 PM
  #15  
Supreme Member

iTrader: (1)
 
ZZ4 86 Z28's Avatar
 
Join Date: Jul 2005
Location: Rockville, Maryland
Posts: 2,435
Likes: 0
Received 1 Like on 1 Post
Car: 1986 Z28 Camaro Gunmetal Gray with
Engine: GM Crate ZZZ HO 350, Edelbrock head
Transmission: Rebuilt 700r4 all TransGo and Beast
Axle/Gears: 10 bolt with 3.73 gears
sorry to hear about that mike.
i was looking at these kind of companies as well. i just sucked it up and paid for one with a warranty ( a rebuild, not a rebuilt unit). it took a little while and cost more than a probuilt (before shipping) for a pretty much stock tranny with beast sunshell and transgo shift kit. and the thing is, he installed it and rebuilt it, if anything happens, its his fault, and he would have no problem redoing it. going local is the way to go if you can even if it costs alot and isnt your ideal tranny. i would also look into probuilt, heard nothing but good about them. he should hook up with some shops and offer install/product warranties.

AND BY THE WAY< YOU CAN PAY LIKE 10 BUCKS OR SOMETHING TO CHANGE YOR FEEDBACK. WRITE SOMETHING LIKE DO NOT BUY FROM THIS GUY, EMAIL FOR DETAILS. and show everyone this thread and tell them your experiences. its hard to look past something like that when you are about to drop over a g on the internet.
ZZ4 86 Z28 is offline  
Old 05-28-2006, 11:30 AM
  #16  
Senior Member
 
mdricken's Avatar
 
Join Date: Mar 2003
Location: Marion, Iowa
Posts: 523
Likes: 0
Received 0 Likes on 0 Posts
Car: 92 Camaro
Engine: ZZ4 Crate Engine w/Hot Cam
Transmission: Rebuilt 700R4 with Transgo and MW 3
Axle/Gears: 3.73 Eaton Posi
You get what you pay for. Those maddog trannies cost 1/2 of what almost anything else out there does.

If you add up the labor and the parts costs in a typical 700r4 tranny it is almost impossible to rebuild it for what they charge.
mdricken is offline  
Old 05-28-2006, 09:20 PM
  #17  
Member
iTrader: (5)
 
LadyInRed's Avatar
 
Join Date: Dec 2004
Location: Summerville, SC
Posts: 150
Likes: 0
Received 0 Likes on 0 Posts
Car: 1984 Camaro Z28
Engine: 2000 LS1
Transmission: T56
Axle/Gears: Moser 12 bolt w/4.11's
Originally Posted by TKO500
Well just beware of his famous lines which I posted in my thread above here. If he calls him saying there is a problem with it, he will tell you the TV cable is misadjusted.

Hopefully he paid for it with a credit card. They offer the best buyer protection there is.

if something does go wrong, i HOPE he says its the tv cable... because 99's dont have a tv cable. that would be pretty funny.


but he had a shop do it, they installed it flushed his cooler and torque convertor. he has receits for it all, so hopefully he is covered.
LadyInRed is offline  
Old 06-01-2006, 02:19 PM
  #18  
Member

 
tuske427's Avatar
 
Join Date: Sep 2003
Location: Los Angeles
Posts: 243
Received 0 Likes on 0 Posts
Car: 1984 Trans Am
Engine: 2002 LS1
Transmission: 6 speed
Axle/Gears: 3:73
I sure hope you guys aren't talking about Maddog Lou transmissions in Florida. I purchased one for my hot Rod I'm building on ebay.

I had trouble with the torque converter (came with stripped bolt threads) They sent me another one for free, despite it being past my warranty (still building the car nad needed it for placement) and now it's in my car.

I hope I don't have to drop the trans/ replace it. Took me 4 times to get my engine successfully in without hassles/ setbacks stopping me from the job completion. The LAST THING I want to do is take the trans out because of a faulty/ cheap rebuild.
tuske427 is offline  
Old 06-01-2006, 03:00 PM
  #19  
Senior Member

iTrader: (5)
 
TKO500's Avatar
 
Join Date: Oct 2004
Location: Pelham, NH
Posts: 608
Likes: 0
Received 0 Likes on 0 Posts
Car: 91 B4C, 17 C7 GS, 16 Denali DMax
Engine: LS3, LS3, LML
Axle/Gears: 3.23, 3.42, 3.23
We are talking about the guy from eBay. He builds JUNK!!!

Do yourself a favor and toss it in the trash or use it to hold a door open. That's all it will be worth in 3 months, actually on the 91st day of the warranty.

For reference for everyone his website is:
www.maddogtransmissions.com

His eBay user name is: maddoglou

An example of an eBay auction from him is:
http://cgi.ebay.com/ebaymotors/700R4...69880751QQrdZ1
TKO500 is offline  
Old 06-01-2006, 05:21 PM
  #20  
Senior Member
 
mdricken's Avatar
 
Join Date: Mar 2003
Location: Marion, Iowa
Posts: 523
Likes: 0
Received 0 Likes on 0 Posts
Car: 92 Camaro
Engine: ZZ4 Crate Engine w/Hot Cam
Transmission: Rebuilt 700R4 with Transgo and MW 3
Axle/Gears: 3.73 Eaton Posi
Why the hell doesn't this guy have any negative feedback? Is nobody buying it off of ebay?
mdricken is offline  
Old 06-02-2006, 09:59 AM
  #21  
Member

 
tuske427's Avatar
 
Join Date: Sep 2003
Location: Los Angeles
Posts: 243
Received 0 Likes on 0 Posts
Car: 1984 Trans Am
Engine: 2002 LS1
Transmission: 6 speed
Axle/Gears: 3:73
I bought mine form ebay and received it in a timely manner, so I left him + feedback.

As I mentioned before my experience on the torque converter, and even past my warranty without the paperwork at hand they replaced the piece.

I'm hoping I have better results.

After all, if every trans he built was junk, why is he still in business?

I'm hoping mine is one of the working ones (of course), but at least now I know why if the trans doesn't work...
tuske427 is offline  
Old 06-02-2006, 05:30 PM
  #22  
Supreme Member

Thread Starter
iTrader: (10)
 
MikeH's Avatar
 
Join Date: Jul 1999
Location: Fla
Posts: 1,780
Likes: 0
Received 2 Likes on 2 Posts
Car: 90 IROC
Engine: 406
Transmission: GMPP 93/4L60
Axle/Gears: 9 bolt 3.27
Originally Posted by mdricken
Why the hell doesn't this guy have any negative feedback? Is nobody buying it off of ebay?
Because no one leaves feedback 6 months down the road. You cant change it later if your not happy.
MikeH is offline  
Old 06-02-2006, 05:39 PM
  #23  
Supreme Member

Thread Starter
iTrader: (10)
 
MikeH's Avatar
 
Join Date: Jul 1999
Location: Fla
Posts: 1,780
Likes: 0
Received 2 Likes on 2 Posts
Car: 90 IROC
Engine: 406
Transmission: GMPP 93/4L60
Axle/Gears: 9 bolt 3.27
In the ads he(lou)always talks about how great they are because he builds them himelf. Well...When i bought mine i was told by the manager at the time. He(lou)didnt build them any more. That they had someone else doing them.
MikeH is offline  
Old 06-02-2006, 05:44 PM
  #24  
Supreme Member

Thread Starter
iTrader: (10)
 
MikeH's Avatar
 
Join Date: Jul 1999
Location: Fla
Posts: 1,780
Likes: 0
Received 2 Likes on 2 Posts
Car: 90 IROC
Engine: 406
Transmission: GMPP 93/4L60
Axle/Gears: 9 bolt 3.27
Originally Posted by ZZ4 86 Z28
sorry to hear about that mike.
i was looking at these kind of companies as well. i just sucked it up and paid for one with a warranty ( a rebuild, not a rebuilt unit). it took a little while and cost more than a probuilt (before shipping) for a pretty much stock tranny with beast sunshell and transgo shift kit. and the thing is, he installed it and rebuilt it, if anything happens, its his fault, and he would have no problem redoing it. going local is the way to go if you can even if it costs alot and isnt your ideal tranny. i would also look into probuilt, heard nothing but good about them. he should hook up with some shops and offer install/product warranties.

AND BY THE WAY< YOU CAN PAY LIKE 10 BUCKS OR SOMETHING TO CHANGE YOR FEEDBACK. WRITE SOMETHING LIKE DO NOT BUY FROM THIS GUY, EMAIL FOR DETAILS. and show everyone this thread and tell them your experiences. its hard to look past something like that when you are about to drop over a g on the internet.
I didnt know you could change your feedback. I will have to look into that.

It worked out i guess the one i got from josh turned out to be a good one.
MikeH is offline  
Old 06-02-2006, 11:22 PM
  #25  
Member

 
Kwiksilverz28's Avatar
 
Join Date: Mar 2001
Location: Deltona, FL
Posts: 134
Likes: 0
Received 1 Like on 1 Post
I have 10k miles on mine and about 18 months, and it is awsome. I bought the godfather. Maybe if you buy the more expensive ones, they actually rebuild it. Shifts harder than any other trans. Just dyno'd the car, and they did a full gear run. The car shifted all over the place. Looked a lot more powerful the it actually is....
Kwiksilverz28 is offline  
Old 06-03-2006, 12:29 AM
  #26  
Member
 
BigMike92Z's Avatar
 
Join Date: Sep 2001
Location: winter springs, FL
Posts: 484
Likes: 0
Received 1 Like on 1 Post
Car: 2006 Pontiac GTO
Transmission: rowing through 6 gears
Originally Posted by Kwiksilverz28
I have 10k miles on mine and about 18 months, and it is awsome. I bought the godfather. Maybe if you buy the more expensive ones, they actually rebuild it. Shifts harder than any other trans. Just dyno'd the car, and they did a full gear run. The car shifted all over the place. Looked a lot more powerful the it actually is....
my boss has been running one in his ls1 for nearly 2 years now. was a nitrous car, now it's got a magnuson blower on it... not sure what the difference is but his has worked flawlessly.
BigMike92Z is offline  
Old 06-05-2006, 10:37 AM
  #27  
Member

 
tuske427's Avatar
 
Join Date: Sep 2003
Location: Los Angeles
Posts: 243
Received 0 Likes on 0 Posts
Car: 1984 Trans Am
Engine: 2002 LS1
Transmission: 6 speed
Axle/Gears: 3:73
It's good to hear there are some positive stories on their products.
tuske427 is offline  
Old 06-14-2006, 04:10 PM
  #28  
Senior Member

 
1990GTA's Avatar
 
Join Date: Nov 2001
Location: Orlando,Fl. USA
Posts: 692
Likes: 0
Received 1 Like on 1 Post
Car: 1990 GTA
Engine: 5.7 T.P.I.
Transmission: 700r4
Axle/Gears: 3:23
I have had mine about a year, no problems yet. Drag race at the track with slicks all the time and drive the crap out of the car!
1990GTA is offline  
Old 06-28-2006, 07:12 AM
  #29  
Member
iTrader: (5)
 
LadyInRed's Avatar
 
Join Date: Dec 2004
Location: Summerville, SC
Posts: 150
Likes: 0
Received 0 Likes on 0 Posts
Car: 1984 Camaro Z28
Engine: 2000 LS1
Transmission: T56
Axle/Gears: Moser 12 bolt w/4.11's
***UPDATE****
friends 99z

well it happened, his trans went. he said it had something to do with the 4th gear drum or overdrive shell, i didnt get the full story.

although maddog is going to repair it under warrenty, his car will just be down for 2 weeks. sucks when you race and modify your daily driver.

i made sure he had it done by a shop and everything was documented. propably save him alot of grief.

wow that trans was in his car about a month.
LadyInRed is offline  
Old 07-03-2006, 09:15 AM
  #30  
Junior Member
 
orlandofl4.8's Avatar
 
Join Date: Jul 2006
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
My mad dog transmission lasted 6 months and blew again 3 months later and it wasnt even a 65e like he said it was. His transmissions are garbage garbage garbage. Here is a link to my story about my experience with them.

Mad Dog Transmissions Ripped Me Off
orlandofl4.8 is offline  
Old 07-06-2006, 07:00 PM
  #31  
Member
iTrader: (1)
 
geoman's Avatar
 
Join Date: Nov 2002
Location: Brandon, Florida
Posts: 150
Likes: 0
Received 1 Like on 1 Post
Car: 74 Camaro
Engine: 358
Transmission: TH350
Man this is a horrible story...I thought of buying one as well....I am glad I didnt now....I heard a lot of good things about Transmission Physicians in Tampa....they are doing alot of LT1 and LS1 cars and have heard no negative feedback..They are also reasonable on price. May want to check them out.

Mike
geoman is offline  
Old 07-07-2006, 10:47 PM
  #32  
Junior Member
 
orlandofl4.8's Avatar
 
Join Date: Jul 2006
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
He wouldnt stall my transmission up to 3000 because he said that I had a 65E and his vendor didnt carry converters that high for a 65E The 60 and 65E will accept the same converter so that was bull. Then when it blew the 2nd time I looked at the pieces and it had a 60E in it because it had a 4 pinion planetary. He is a thief, a liar, and has no integrity what so ever.
orlandofl4.8 is offline  
Old 07-08-2006, 09:01 PM
  #33  
Member
iTrader: (5)
 
LadyInRed's Avatar
 
Join Date: Dec 2004
Location: Summerville, SC
Posts: 150
Likes: 0
Received 0 Likes on 0 Posts
Car: 1984 Camaro Z28
Engine: 2000 LS1
Transmission: T56
Axle/Gears: Moser 12 bolt w/4.11's
Originally Posted by orlandofl4.8
He wouldnt stall my transmission up to 3000 because he said that I had a 65E and his vendor didnt carry converters that high for a 65E The 60 and 65E will accept the same converter so that was bull. Then when it blew the 2nd time I looked at the pieces and it had a 60E in it because it had a 4 pinion planetary. He is a thief, a liar, and has no integrity what so ever.
The only real difference in the two is that the 65 has one more tooth on the planetary gear sets, or the sun gear. im not 100% on which one. that extra tooth allows it to be used up to 6500 gvw, instead of 6000 gvw.
LadyInRed is offline  
Old 07-09-2006, 05:13 PM
  #34  
Supreme Member
iTrader: (21)
 
82 Iron Duke's Avatar
 
Join Date: Dec 2005
Posts: 4,075
Likes: 0
Received 1 Like on 1 Post
Car: 04 Silverado
Engine: 4.8
Transmission: auto
Originally Posted by LadyInRed
***UPDATE****
friends 99z

well it happened, his trans went. he said it had something to do with the 4th gear drum or overdrive shell, i didnt get the full story.

although maddog is going to repair it under warrenty, his car will just be down for 2 weeks. sucks when you race and modify your daily driver.

i made sure he had it done by a shop and everything was documented. propably save him alot of grief.

wow that trans was in his car about a month.
I had the same thing happen to my friend after I warned him but he installed it himself so he is screwed!
82 Iron Duke is offline  
Old 07-09-2006, 06:09 PM
  #35  
Junior Member
iTrader: (2)
 
DragRacer383's Avatar
 
Join Date: Jun 2004
Location: Pocahontas,Arkansas
Posts: 64
Likes: 0
Received 0 Likes on 0 Posts
Car: 84 Z28, 84 Silverado
Engine: 355 Mild
Transmission: 350th
Axle/Gears: 2.41 Gears and a Posi
A friend of mine has a 97 Vortec truck. The mods are Headers, small cam, Hyper tech programmer. Nitrous. He has only used one bottle ever though. Mostly for looks.

He bought one when his trans went out. He bought the "good" one. With a 2,300 stall. got it all in. The dang thing would stall 3,000 before it would move and 5,000 with some throttle. They swapped that out for stock converter. Trans did good. for about a month. Then it went south. had it replaced under warranty. The next one lasted about 6 month and left him 200 miles from home. Big tow bill. There was more trouble than this. Since I can't remember all the details that is a summary.

He spent enough he could have had a 400th and gear venders OD.
DragRacer383 is offline  
Old 07-17-2006, 09:13 AM
  #36  
Member
iTrader: (1)
 
macdadyZ28's Avatar
 
Join Date: Aug 2004
Location: Melbourne Florida
Posts: 202
Likes: 0
Received 0 Likes on 0 Posts
Car: 87 Formula
Engine: '00 LM7
Transmission: 4L60e
Axle/Gears: 3.23 posi
*jaw drops* unbelievable. i was really looking into this guy to get a trans from because it was lower price and pretty close to where i am. but these stories are rediculous. I'm going with a local to do my transmission instead.
macdadyZ28 is offline  
Old 07-17-2006, 11:42 AM
  #37  
Member

iTrader: (8)
 
92rsvortec350's Avatar
 
Join Date: Mar 2006
Location: TN
Posts: 205
Likes: 0
Received 1 Like on 1 Post
Car: 92 rs z28 clone
Engine: forged 350
Transmission: 700r4 fully built
Axle/Gears: moser axles eaton posi 3.73 gears
just for everyone that doesnt know a 700r4 and 4l60e only has one band and it's for the 2 and 4 gears only and kevlar bands came stock in the 4l60e most people just put them in 700r4's and as far as price goes most upgrades for a 700r4 are cheap I built mine and it cost me $700 in parts but it has the same parts as the $2,400 raptor trans. has most of the money goes to labor just look at the price of rebuild kits and stuff like servos cost $10, a kevlar band $13, .500 bost valve $9,13 vaine pump kit $20, z pack that uprages the 3 and 4 gear clutches from 6 to 9 cost $49 so you see most of the parts are cheap and most of the time free tricks are done that make the trans. shift hard not even the parts.

this is just some info not to sound like a **s
92rsvortec350 is offline  
Old 07-28-2006, 12:10 PM
  #38  
Senior Member
iTrader: (-1)
 
IceManRS305's Avatar
 
Join Date: Jan 2004
Location: hamilton nj
Posts: 776
Likes: 0
Received 0 Likes on 0 Posts
Car: 91 Camaro RS
Engine: 350 bored .030 carbed
Transmission: t5
Axle/Gears: 3.08
hate to say it but yea mad dog tanny's are garbage, me and my buddy both bought the "Godfather" tranny, one for his 94 caprice, and one for my 91 camaro, both did arrive promptly, but they were both gone in 4 months.... and it wasnt even like we had Big horsepower motors, we both had about 300-375 at the fly
IceManRS305 is offline  
Old 01-05-2007, 02:46 PM
  #39  
Junior Member
 
MonteC's Avatar
 
Join Date: Sep 2003
Location: Summerville, SC
Posts: 39
Likes: 0
Received 0 Likes on 0 Posts
Car: 86 Monte Carlo SS
Engine: LC2
Transmission: 2004r
Axle/Gears: 3.42 8.5" 10 bolt posi
Originally Posted by LadyInRed
***UPDATE****
friends 99z

well it happened, his trans went. he said it had something to do with the 4th gear drum or overdrive shell, i didnt get the full story.

although maddog is going to repair it under warrenty, his car will just be down for 2 weeks. sucks when you race and modify your daily driver.

i made sure he had it done by a shop and everything was documented. propably save him alot of grief.

wow that trans was in his car about a month.
just for everyone to know, im going to be tearing one of these transmissions down and taking a look at mr mad dogs work. Probably sometime in february. ill post up details when i do. (its the one that ladyinred is refering to.)
MonteC is offline  
Old 01-05-2007, 04:15 PM
  #40  
Member
 
ws6gta89's Avatar
 
Join Date: Oct 2006
Location: Melbourne,Fl
Posts: 365
Likes: 0
Received 0 Likes on 0 Posts
Car: 1989 TRANS AM GTA
Engine: 355 L98
Transmission: Built 700r4
Axle/Gears: BW 3.27
My dad owns a tranny shop and they do everything but front end alignments so i got mine done for the ''cost'' not retail of the parts and all i had to do was pull it and push it myself which is super easy with all the lifts and tools and if i ever have a problem one of the guys is always willing to help,one problem that i have noticed is that just like a new motor you have to let them break in and alot of people dont do that then wonder why there unit messed up....
ws6gta89 is offline  
Old 01-05-2007, 05:01 PM
  #41  
Supreme Member

Thread Starter
iTrader: (10)
 
MikeH's Avatar
 
Join Date: Jul 1999
Location: Fla
Posts: 1,780
Likes: 0
Received 2 Likes on 2 Posts
Car: 90 IROC
Engine: 406
Transmission: GMPP 93/4L60
Axle/Gears: 9 bolt 3.27
Originally Posted by MonteC
just for everyone to know, im going to be tearing one of these transmissions down and taking a look at mr mad dogs work. Probably sometime in february. ill post up details when i do. (its the one that ladyinred is refering to.)
I would be interested to know the out come of this.
MikeH is offline  
Old 01-05-2007, 05:13 PM
  #42  
Supreme Member
 
formul8!!'s Avatar
 
Join Date: Jan 2001
Location: www.thirdgentech.com
Posts: 1,609
Likes: 0
Received 0 Likes on 0 Posts
Car: 2004 GTO
Engine: LS1
Transmission: T-56
The stock trans in my '89 Formula 350 went 80K before losing 3rd gear after many many drag strip passes.
formul8!! is offline  
Old 01-05-2007, 10:09 PM
  #43  
Senior Member

 
1990GTA's Avatar
 
Join Date: Nov 2001
Location: Orlando,Fl. USA
Posts: 692
Likes: 0
Received 1 Like on 1 Post
Car: 1990 GTA
Engine: 5.7 T.P.I.
Transmission: 700r4
Axle/Gears: 3:23
I am not promoting this guy because I had my own issues with him, he sold me a Vette tranny when he knew it was going in a Trans Am (I don't know who "he" was, but it was not Mad Dog). I could not tell the difference until I had it in the car and noticed there was nowhere to bolt the crossmember to. So I had to take it out and take it back to him to get another one, which was a 3 hour drive.

...Besides that, the tranny has been in the car for over a year with over 10,000 miles and many drag strip passes on slicks. When it goes into 2nd gear it will yank the fillings out of your teeth, I love it. Hopefully I got lucky *crosses fingers*.
1990GTA is offline  
Old 01-10-2007, 11:09 AM
  #44  
Member
 
pmpnavt's Avatar
 
Join Date: Aug 2005
Location: Chicago, IL
Posts: 220
Likes: 0
Received 0 Likes on 0 Posts
Car: 1988 Pontiac Trans Am GTA
Engine: L98 350
Transmission: 700r-4
i have a god father from mad dog and its great. from the sound of alot of these posts it is installer error. i use a pressure gauge to set my TV cable. my trans also came with the tailshaft housing missing so i guess i could see where the issue with the crossmember would be, but installing it on the new trans was easy. all the reviews ive read on here sound like people who have set up a 700 before have no problems and people who havent say the trans sucks.

just my opinion
pmpnavt is offline  
Old 01-10-2007, 12:27 PM
  #45  
TGO Supporter

iTrader: (2)
 
92 Formula's Avatar
 
Join Date: Feb 2000
Location: Avatar: My 34' 1989 Scarab III w/ twin 454's (502's Started!)
Posts: 1,235
Likes: 0
Received 2 Likes on 2 Posts
Car: 1989 Wellcraft Scarab III
Engine: Twin 454's
Axle/Gears: Twin Mercruiser Bravo I's
Originally Posted by pmpnavt
i have a god father from mad dog and its great. from the sound of alot of these posts it is installer error. i use a pressure gauge to set my TV cable. my trans also came with the tailshaft housing missing so i guess i could see where the issue with the crossmember would be, but installing it on the new trans was easy. all the reviews ive read on here sound like people who have set up a 700 before have no problems and people who havent say the trans sucks.

just my opinion
Interesting point, but playing Devil's Advocate, why aren't there as many posts about Pro-Built tranny's being trash if it's inexperienced people doing the installs and setting them up? You rarely if ever see complaints about Pro-Builts, which I happen to be an advocate of, as they have an EXCELLENT reputation and mine has been perfect.

Not arguing with you or dismissing your point, just a counter point.
92 Formula is offline  
Old 01-10-2007, 12:45 PM
  #46  
Supreme Member

 
MrDude_1's Avatar
 
Join Date: Jun 2001
Location: Charleston, SC
Posts: 9,550
Likes: 0
Received 2 Likes on 2 Posts
Car: 91 Camaro Vert
Engine: 02 LS1, HX40
Transmission: 2002 LS1 M6
Originally Posted by 92 Formula
Interesting point, but playing Devil's Advocate, why aren't there as many posts about Pro-Built tranny's being trash if it's inexperienced people doing the installs and setting them up? You rarely if ever see complaints about Pro-Builts, which I happen to be an advocate of, as they have an EXCELLENT reputation and mine has been perfect.

Not arguing with you or dismissing your point, just a counter point.
the answer to that is...... he blames installer error or improper TV cable setup for EVERYTHING.
MrDude_1 is offline  
Old 01-10-2007, 12:52 PM
  #47  
Member

 
ZimGTA's Avatar
 
Join Date: Dec 2003
Location: twin cities
Posts: 154
Likes: 0
Received 0 Likes on 0 Posts
Car: 88 GTA
Engine: 383
Transmission: 700 r
Ws6gta89, what is the proper way to break in a transmission? Some more info might save people some needless work and trouble.
ZimGTA is offline  
Old 01-10-2007, 10:21 PM
  #48  
Member
 
pmpnavt's Avatar
 
Join Date: Aug 2005
Location: Chicago, IL
Posts: 220
Likes: 0
Received 0 Likes on 0 Posts
Car: 1988 Pontiac Trans Am GTA
Engine: L98 350
Transmission: 700r-4
Originally Posted by 92 Formula
Interesting point, but playing Devil's Advocate, why aren't there as many posts about Pro-Built tranny's being trash if it's inexperienced people doing the installs and setting them up? You rarely if ever see complaints about Pro-Builts, which I happen to be an advocate of, as they have an EXCELLENT reputation and mine has been perfect.

Not arguing with you or dismissing your point, just a counter point.

thats a good question, and i have done little research on pro-built, if any at all. all i know from my own experiences, is that the 700 is very easy to misadjust.

its just very easy to point fingers to someone else....be it the installer or the rebuilder
pmpnavt is offline  
Old 01-11-2007, 10:36 AM
  #49  
Member
iTrader: (5)
 
LadyInRed's Avatar
 
Join Date: Dec 2004
Location: Summerville, SC
Posts: 150
Likes: 0
Received 0 Likes on 0 Posts
Car: 1984 Camaro Z28
Engine: 2000 LS1
Transmission: T56
Axle/Gears: Moser 12 bolt w/4.11's
Originally Posted by pmpnavt
thats a good question, and i have done little research on pro-built, if any at all. all i know from my own experiences, is that the 700 is very easy to misadjust.

its just very easy to point fingers to someone else....be it the installer or the rebuilder
so how do you install a 4l60e wrong? stock tune on a 99z, cooler flushed, everything installed by a professional shop, new torqure converter, NO TV CABLE to misadjust.

trans still takes a dump 3 months down the road.

when you start getting more complaints then compliments, there is something wrong with the product.
LadyInRed is offline  
Old 01-11-2007, 11:00 AM
  #50  
Member
 
pmpnavt's Avatar
 
Join Date: Aug 2005
Location: Chicago, IL
Posts: 220
Likes: 0
Received 0 Likes on 0 Posts
Car: 1988 Pontiac Trans Am GTA
Engine: L98 350
Transmission: 700r-4
easy there buddy i just gave my opinion so i FEEL that alot of people misinstall 700's

i didnt ever say any other
pmpnavt is offline  

Thread Tools
Search this Thread
Quick Reply: How long has your maddog tranny lasted?



All times are GMT -5. The time now is 08:52 PM.