Go Back   Third Generation F-Body Message Boards > Tech Boards > Aftermarket Vendor Review

Aftermarket Vendor Review Provide questions and comments about aftermarket part vendors for the Third Gen F-Body.

Welcome to ThirdGen.org!
Welcome to ThirdGen.org.

You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!


Reply
 
Thread Tools
Old 03-10-2008, 05:46 PM   #1
Member
 
Join Date: Aug 2006
Location: NJ
Posts: 108
Car: 1988 t/a gta
Engine: 350
Transmission: manual

Classifieds Rating: (1)
G&T Fiberglass - Hoods

I am looking to buy a Ram Air II Hood from them for my 88 trans am, I was wondering if anybody has dealt with them in the past and has an opinion to share regarding the company or their hoods. How is the construction of the hood?? Overall is it ok to spend the 400 on the hood or should i get one from ramairhoods.com who charge 850? Thanks in advance

-pete
This ad is not displayed to registered members.
Register your free account today and become a member on ThirdGen!
Snowblind is offline vBGarage Page   Reply With Quote
Sponsored Links
Registered users do not see this ad.
Click here to register for free!
Old 03-10-2008, 06:06 PM   #2
Senior Member
 
goalieforlife's Avatar
 
Join Date: Jan 2007
Location: Newfoundland, Canada
Posts: 683
Car: 1992 Pontiac Firebird
Engine: V8 305
Transmission: Automatic Transmission

Classifieds Rating: (3)
Re: G&T Fiberglass - Hoods

Quote:
Originally Posted by Snowblind View Post
I am looking to buy a Ram Air II Hood from them for my 88 trans am, I was wondering if anybody has dealt with them in the past and has an opinion to share regarding the company or their hoods. How is the construction of the hood?? Overall is it ok to spend the 400 on the hood or should i get one from ramairhoods.com who charge 850? Thanks in advance

-pete

bad reviews for them i am afraid
goalieforlife is offline vBGarage Page   Reply With Quote
Old 03-10-2008, 06:56 PM   #3
Senior Member
 
Join Date: Dec 2006
Location: Guilford, Connecticut
Posts: 1,093
Car: 1987 Trans Am
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: 2:73

Classifieds Rating: (1)
Re: G&T Fiberglass - Hoods

GT fiberglass was recently bought out by north county fiberglass, heres their website www.northccountryfiberglass.com

but my Ram Air II hood is from GT Fiberglass, and so far (couple months) I think its great quality.
__________________

87' Trans am - 305 TPI, 700R4, Bone stock.
future plans - built 700r4, disc rear, then mild 350 (shooting for atleast 300 rwhp)
http://www.cardomain.com/ride/2535588
"some teens still have a good taste in cars"
Tmic87TPI is offline vBGarage Page   Reply With Quote
Old 03-10-2008, 08:16 PM   #4
Member
 
Join Date: Aug 2006
Location: NJ
Posts: 108
Car: 1988 t/a gta
Engine: 350
Transmission: manual

Classifieds Rating: (1)
Re: G&T Fiberglass - Hoods

Quote:
Originally Posted by Tmic87TPI View Post
GT fiberglass was recently bought out by north county fiberglass, heres their website www.northccountryfiberglass.com

but my Ram Air II hood is from GT Fiberglass, and so far (couple months) I think its great quality.
does it have any steel reinforcements in it to support the hood at all? Since im looking to get that same exact hood any and all information (such as fit) would be greatly appreciated.

and to the poster above what were the general complaints?
Snowblind is offline vBGarage Page   Reply With Quote
Old 03-10-2008, 10:13 PM   #5
Senior Member
 
Join Date: Dec 2006
Location: Guilford, Connecticut
Posts: 1,093
Car: 1987 Trans Am
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: 2:73

Classifieds Rating: (1)
Re: G&T Fiberglass - Hoods

I'm not sure if it has any metal reinforcements but judging by how light it is I doubt it.
__________________

87' Trans am - 305 TPI, 700R4, Bone stock.
future plans - built 700r4, disc rear, then mild 350 (shooting for atleast 300 rwhp)
http://www.cardomain.com/ride/2535588
"some teens still have a good taste in cars"
Tmic87TPI is offline vBGarage Page   Reply With Quote
Old 03-10-2008, 10:22 PM   #6
Member
 
Join Date: Aug 2006
Location: NJ
Posts: 108
Car: 1988 t/a gta
Engine: 350
Transmission: manual

Classifieds Rating: (1)
Re: G&T Fiberglass - Hoods

ok cause ram air hood touts theres having steel reinforcements but if its not flimsy and is light enough i dont see why u would need them lol
Snowblind is offline vBGarage Page   Reply With Quote
Old 03-12-2008, 12:23 PM   #7
Senior Member
 
Join Date: Apr 2002
Location: louisville, co
Posts: 312
Car: 86 T/A
Engine: 383
Transmission: ProBuilt 700R4 2800 Stall
Axle/Gears: 3.27 9 bolt

Classifieds Rating: (2)
Send a message via AIM to d4nk
Re: G&T Fiberglass - Hoods

avoid them like the pleague!!!

http://www.thirdgen.org/techboard/af...tml?highlight= (G&T Fiberglass)
d4nk is offline vBGarage Page   Reply With Quote
Old 03-12-2008, 04:13 PM   #8
Member
 
Join Date: Aug 2006
Location: NJ
Posts: 108
Car: 1988 t/a gta
Engine: 350
Transmission: manual

Classifieds Rating: (1)
Re: G&T Fiberglass - Hoods

there owned by north country now, ive emailed Jim who replied once to my email and now he has gone silent. I want to do business if the price is right, but they wont even answer the damn phone~!!
Snowblind is offline vBGarage Page   Reply With Quote
Old 03-12-2008, 04:32 PM   #9
Member
 
Join Date: Jun 2007
Location: Covington, In
Posts: 128
Car: '82 Camaro Z28
Engine: 383
Transmission: 700r4
Axle/Gears: 3.73 with powetrax

Classifieds Rating: (0)
Re: G&T Fiberglass - Hoods

I emailed north country a day or two about a 5 inch jongbloed hood for my camaro and i havent heard anything back yet. I hope their hoods arent too bad they are the only ones that make the jongbloed hood and its the best hood for a 82-92 camaro by far.
awilson82 is offline vBGarage Page   Reply With Quote
Old 03-12-2008, 06:58 PM   #10
Junior Member
 
Join Date: Dec 2007
Location: Janesville, WI
Posts: 54
Car: 1989 Trans Am
Engine: 305 tpi
Transmission: 4speed overdrive automatic

Classifieds Rating: (2)
Re: G&T Fiberglass - Hoods

I would love to find a good quality ram air II hood for my 89 also
ttoplover is offline vBGarage Page   Reply With Quote
Old 03-12-2008, 06:58 PM   #11
Junior Member
 
Join Date: Aug 2003
Location: CT
Posts: 72
Car: 1986 Trans AM
Engine: 396 LT1 Stroker
Transmission: 4L60E
Axle/Gears: Ford 9 Inch w/ 3:70 Gears

Classifieds Rating: (0)
Re: G&T Fiberglass - Hoods

Yeah these guys suck big time. I ordered a spoiler for my 86 Ta. The mounting holes wont even line up to bolt the thing on the car. I called the next day to return it they said it was fine that i could come up on friday afternoon to return the spoiler for cash. I went there and the place was closed and now they wont even pick up the phone. I called the BBB and the becon falls police and they cant do anything to help me. STAY AWAY. The best thing is these fools are in my car club so i cant wait to see them at a show and beat my $300 out of them.
1986lt1boy is offline vBGarage Page   Reply With Quote
Old 03-13-2008, 12:20 AM   #12
Senior Member
 
Stephen's Avatar
 
Join Date: Jul 1999
Location: Austin, TX
Posts: 8,191
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi

Classifieds Rating: (12)
Send a message via AIM to Stephen
Re: G&T Fiberglass - Hoods

Look up the URL registration.....I think G&T simply renamed themselves because of their BAD reputation.
__________________

Custom powder coated flat black ROH Snypers w/the correct 3rd gen offset (no spacers needed, front or rear) Front--275/40R17s on 17"x9"--5" bs & custom widened & custom powder coated Rear--315/35R17s on 17"x11"--7" bs,
4th gen front seats, OEM 2001 TA rear wing, OEM 1997 TA side mirrors
TSP LS1 Cat-back exhaust-UMI Rod Ended STB-UMI Double Rod Ended On-car Adjustable PHB-UMI Performance Adjustable Control Arms with Off-Set Bushings - Ground Control Weight Jacks, Eibach Springs 9.5"-600lb/10"-150lb


To be Installed:
UMI Performance Tie Rod Adjusters-Kenny Brown Double Diamond SFCs

Home of the STS (Sequential Turn Signal) mod
Parting Out - 1989 Pontiac Trans Am GTA


GOD Bless America
Stephen is offline vBGarage Page   Reply With Quote
Old 03-13-2008, 12:35 AM   #13
Member
 
Join Date: Aug 2006
Location: NJ
Posts: 108
Car: 1988 t/a gta
Engine: 350
Transmission: manual

Classifieds Rating: (1)
Re: G&T Fiberglass - Hoods

this is very dissapointing, i would like to believe it is a fresh rep being under new ownership but this is not a good way to start out. And if they are simply rehashing the name.. then that is 10000x worse. where else could i get a hood in that price range???
Snowblind is offline vBGarage Page   Reply With Quote
Old 03-13-2008, 01:34 AM   #14
Member
 
Join Date: Jun 2007
Location: Covington, In
Posts: 128
Car: '82 Camaro Z28
Engine: 383
Transmission: 700r4
Axle/Gears: 3.73 with powetrax

Classifieds Rating: (0)
Re: G&T Fiberglass - Hoods

I agree it sucks big time. SOME ONE ELSE MAKE JONGBLOEDS AND OTHER KICK *** HOODS ALREADY. Sorry for the caps but Im irked. Even if the quality is bad what the hell are they doing? You are a business...those people that call and email you....they will buy things from you if you talk to them...DUMBASSES!
awilson82 is offline vBGarage Page   Reply With Quote
Old 03-13-2008, 01:36 AM   #15
Senior Member
 
Stephen's Avatar
 
Join Date: Jul 1999
Location: Austin, TX
Posts: 8,191
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi

Classifieds Rating: (12)
Send a message via AIM to Stephen
Re: G&T Fiberglass - Hoods

Simply renamed himself, SAYING G&T was sold....

Registrant:
george ostrom
141 s main st box 25
beacon falls, ct 06403
US

Domain name: GTFIBERGLASS.COM

Administrative Contact:
ostrom, george gtfiberglass@yahoo.com
141 s main st box 25
beacon falls, ct 06403
US
+1.2037291937

And.....

Registrant:
george ostrom
35 highland ave
beacon falls, ct 06403
US

Domain name: NORTHCOUNTRYFIBERGLASS.COM

Administrative Contact:
ostrom, george gostr@yahoo.com
35 highland ave
beacon falls, ct 06403
US
+1.2037291937

What a LOSER! Tries to pretend the company was sold, when he simply renamed it. I trust him even LESS now! Changed from a P.O. box to a street address...Big deal!
__________________

Custom powder coated flat black ROH Snypers w/the correct 3rd gen offset (no spacers needed, front or rear) Front--275/40R17s on 17"x9"--5" bs & custom widened & custom powder coated Rear--315/35R17s on 17"x11"--7" bs,
4th gen front seats, OEM 2001 TA rear wing, OEM 1997 TA side mirrors
TSP LS1 Cat-back exhaust-UMI Rod Ended STB-UMI Double Rod Ended On-car Adjustable PHB-UMI Performance Adjustable Control Arms with Off-Set Bushings - Ground Control Weight Jacks, Eibach Springs 9.5"-600lb/10"-150lb


To be Installed:
UMI Performance Tie Rod Adjusters-Kenny Brown Double Diamond SFCs

Home of the STS (Sequential Turn Signal) mod
Parting Out - 1989 Pontiac Trans Am GTA


GOD Bless America
Stephen is offline vBGarage Page   Reply With Quote
Old 03-13-2008, 01:59 AM   #16
Member
 
Join Date: Aug 2006
Location: NJ
Posts: 108
Car: 1988 t/a gta
Engine: 350
Transmission: manual

Classifieds Rating: (1)
Re: G&T Fiberglass - Hoods

i spoke with a guy named jim. grrrr they should get on this site and justify themselves...

good digging stephen
Snowblind is offline vBGarage Page   Reply With Quote
Old 03-13-2008, 09:30 AM   #17
Member
 
Join Date: Jun 2007
Location: Covington, In
Posts: 128
Car: '82 Camaro Z28
Engine: 383
Transmission: 700r4
Axle/Gears: 3.73 with powetrax

Classifieds Rating: (0)
Re: G&T Fiberglass - Hoods

If they ever wanna sell anything to people with third gens they better lol!
awilson82 is offline vBGarage Page   Reply With Quote
Old 03-13-2008, 10:20 AM   #18
Member
 
Join Date: Jun 2007
Location: Covington, In
Posts: 128
Car: '82 Camaro Z28
Engine: 383
Transmission: 700r4
Axle/Gears: 3.73 with powetrax

Classifieds Rating: (0)
Re: G&T Fiberglass - Hoods

I just got a reply email from Jim at G&T/ North Country about the 5 inch jongbloed for camaros. Before I knew they had just changed their name I had asked if they had acquired the mold because the hood wasnt listed on the site. Apparently the mold is in need of repair (perhaps why there arent any good pics of the 5inch ANYWHERE if you have one sent it to me) He said it should be repair in the next couple months. Now I just wonder about the quality and if I should trust them........
awilson82 is offline vBGarage Page   Reply With Quote
Old 03-13-2008, 12:19 PM   #19
Member
 
Join Date: Aug 2006
Location: NJ
Posts: 108
Car: 1988 t/a gta
Engine: 350
Transmission: manual

Classifieds Rating: (1)
Re: G&T Fiberglass - Hoods

yea jim emailed me at 930 this morning should be giving me ring soon. will see
Snowblind is offline vBGarage Page   Reply With Quote
Old 03-13-2008, 03:19 PM   #20
Junior Member
 
jeffthebutcher's Avatar
 
Join Date: Apr 2004
Location: Western MA
Posts: 21
Car: 1987 Formula
Engine: 305
Transmission: 700R4
Axle/Gears: 2.73

Classifieds Rating: (0)
Send a message via AIM to jeffthebutcher
Re: G&T Fiberglass - Hoods

just my two cents but i have the ram air hood and 4th gen spoiler from them and it bolted right up with no problems, ya i had to drill new holes for the spoiler but their templet was easy to use. i cannot complane with the construction. i would buy from them again. jeff
jeffthebutcher is offline vBGarage Page   Reply With Quote
Old 03-13-2008, 06:10 PM   #21
Member
 
Join Date: Aug 2006
Location: NJ
Posts: 108
Car: 1988 t/a gta
Engine: 350
Transmission: manual

Classifieds Rating: (1)
Re: G&T Fiberglass - Hoods

how much did they charge u for each piece?
Snowblind is offline vBGarage Page   Reply With Quote
Old 03-23-2008, 04:26 PM   #22
Junior Member
 
Join Date: Mar 2008
Posts: 1

Classifieds Rating: (0)
Re: G&T Fiberglass - Hoods

I bought a gen 3 ram air hood and filter kit from them. The hood is over an inch out of square and slops under the fender curve bad. I e-mailed them and got a responce of how to install the hood .So I sent pics of how far off it was. I was told I must have stored it wrong and it warped. So my reply was it was on the car and never fit....... No more responce!
So I sent an e-mail to the "NEW COMPANY" today I will let you know what happens
89ff350 is offline vBGarage Page   Reply With Quote
Old 03-27-2008, 12:05 PM   #23
Junior Member
 
Quick86Camaro's Avatar
 
Join Date: Oct 2005
Location: Charlotte, Nc
Posts: 10

Classifieds Rating: (0)
Send a message via AIM to Quick86Camaro
Re: G&T Fiberglass - Hoods

I'm a vendor of hoods and spoilers, and based on what i've seen with others that used to have accounts with them, the owner of G&T would just quit answering his phone, and pop up like 6 months later ready for orders. Very strange. but everything they offer is made by others as well. i have the hoods and spoilers they sell as well. www.restoreandcustom.com
Quick86Camaro is offline vBGarage Page   Reply With Quote
Old 03-27-2008, 04:09 PM   #24
Senior Member
 
Stephen's Avatar
 
Join Date: Jul 1999
Location: Austin, TX
Posts: 8,191
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi

Classifieds Rating: (12)
Send a message via AIM to Stephen
Re: G&T Fiberglass - Hoods

Quote:
Originally Posted by Quick86Camaro View Post
I'm a vendor of hoods and spoilers, and based on what i've seen with others that used to have accounts with them, the owner of G&T would just quit answering his phone, and pop up like 6 months later ready for orders. Very strange. but everything they offer is made by others as well. i have the hoods and spoilers they sell as well. www.restoreandcustom.com
EVERYTHING? Where is the Jongbloed-style hood on your site?
__________________

Custom powder coated flat black ROH Snypers w/the correct 3rd gen offset (no spacers needed, front or rear) Front--275/40R17s on 17"x9"--5" bs & custom widened & custom powder coated Rear--315/35R17s on 17"x11"--7" bs,
4th gen front seats, OEM 2001 TA rear wing, OEM 1997 TA side mirrors
TSP LS1 Cat-back exhaust-UMI Rod Ended STB-UMI Double Rod Ended On-car Adjustable PHB-UMI Performance Adjustable Control Arms with Off-Set Bushings - Ground Control Weight Jacks, Eibach Springs 9.5"-600lb/10"-150lb


To be Installed:
UMI Performance Tie Rod Adjusters-Kenny Brown Double Diamond SFCs

Home of the STS (Sequential Turn Signal) mod
Parting Out - 1989 Pontiac Trans Am GTA


GOD Bless America
Stephen is offline vBGarage Page   Reply With Quote
Old 03-27-2008, 10:46 PM   #25
Senior Member
 
goalieforlife's Avatar
 
Join Date: Jan 2007
Location: Newfoundland, Canada
Posts: 683
Car: 1992 Pontiac Firebird
Engine: V8 305
Transmission: Automatic Transmission

Classifieds Rating: (3)
Re: G&T Fiberglass - Hoods

Quote:
Originally Posted by Quick86Camaro View Post
I'm a vendor of hoods and spoilers, and based on what i've seen with others that used to have accounts with them, the owner of G&T would just quit answering his phone, and pop up like 6 months later ready for orders. Very strange. but everything they offer is made by others as well. i have the hoods and spoilers they sell as well. www.restoreandcustom.com
This guy has higher prices than most. Are carb air boxes still available to buy?
goalieforlife is offline vBGarage Page   Reply With Quote
Old 05-10-2008, 06:47 PM   #26
Member
 
Join Date: Dec 2004
Location: Rhode Island
Posts: 164
Car: 1988 Trans Am
Engine: 305, Better than Ultimate TBI
Transmission: Built 700R4 w/ Corvette servos
Axle/Gears: Good gas mileage gearing w/ posi

Classifieds Rating: (0)
Send a message via AIM to t/adreams
Re: G&T Fiberglass - Hoods

Quote:
Originally Posted by Quick86Camaro View Post
I'm a vendor of hoods and spoilers, and based on what i've seen with others that used to have accounts with them, the owner of G&T would just quit answering his phone, and pop up like 6 months later ready for orders. Very strange. but everything they offer is made by others as well. i have the hoods and spoilers they sell as well. www.restoreandcustom.com
I just wrote you an email regarding your spoilers. Hoping to hear back from you soon!
t/adreams is offline vBGarage Page   Reply With Quote
Old 05-10-2008, 07:45 PM   #27
Senior Member
 
Stephen's Avatar
 
Join Date: Jul 1999
Location: Austin, TX
Posts: 8,191
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi

Classifieds Rating: (12)
Send a message via AIM to Stephen
Re: G&T Fiberglass - Hoods

Quote:
Originally Posted by Quick86Camaro View Post
I'm a vendor of hoods and spoilers, and based on what i've seen with others that used to have accounts with them, the owner of G&T would just quit answering his phone, and pop up like 6 months later ready for orders. Very strange. but everything they offer is made by others as well. i have the hoods and spoilers they sell as well. www.restoreandcustom.com
Interesting how, after criticizing G&T for lack of response, a month later, and HE won't respond to me....
__________________

Custom powder coated flat black ROH Snypers w/the correct 3rd gen offset (no spacers needed, front or rear) Front--275/40R17s on 17"x9"--5" bs & custom widened & custom powder coated Rear--315/35R17s on 17"x11"--7" bs,
4th gen front seats, OEM 2001 TA rear wing, OEM 1997 TA side mirrors
TSP LS1 Cat-back exhaust-UMI Rod Ended STB-UMI Double Rod Ended On-car Adjustable PHB-UMI Performance Adjustable Control Arms with Off-Set Bushings - Ground Control Weight Jacks, Eibach Springs 9.5"-600lb/10"-150lb


To be Installed:
UMI Performance Tie Rod Adjusters-Kenny Brown Double Diamond SFCs

Home of the STS (Sequential Turn Signal) mod
Parting Out - 1989 Pontiac Trans Am GTA


GOD Bless America
Stephen is offline vBGarage Page   Reply With Quote


Reply

Go Back   Third Generation F-Body Message Boards > Tech Boards > Aftermarket Vendor Review

Tags
fiberglass, george, ostrom
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

 






1982 Camaro '82 || 1983 Camaro '83 || 1984 Camaro '84 || 1985 Camaro '85 || 1986 Camaro '86 || 1987 Camaro '87 || 1988 Camaro '88 || 1989 Camaro '89 || 1990 Camaro '90 || 1991 Camaro '91 || 1992 Camaro '92


All times are GMT -5. The time now is 01:38 AM.


Powered by vBulletin® Version 3.7.5
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.2.0
All content copyright © 1997 - 2009 ThirdGen.org. All rights reserved. No part of this website may be reproduced without the expressed, documented, and written consent of ThirdGen.org's Administrators.