Alternative Port EFI IntakesThis board is for tech discussions and questions about aftermarket port EFI such as the HSR, MR, SR, BBK, FIRST, etc.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
went to search this forum in the alternate intake section and realized it had been erased except for 2 pages!?!
need to kno the size of a silicone hose coupler to fit around my 58mm TB so i can connect the TB to the 3" grannelli MAF. i cant remember if its a 4" to 3" coupler or a 4.5" to 3" coupler... any links would be appreciated
__________________ In the process:
521cuin Big block ford
Ford C-6 trans
Ford 8.8 w/3.55gears, custom shorty Tq arm
went to search this forum in the alternate intake section and realized it had been erased except for 2 pages!?!
need to kno the size of a silicone hose coupler to fit around my 58mm TB so i can connect the TB to the 3" grannelli MAF. i cant remember if its a 4" to 3" coupler or a 4.5" to 3" coupler... any links would be appreciated
The default sort option is for last 75 days.
If you look at the bottom left of the page, select a larger date range and you will get many pages.
And yes, as formularpm said, 4" for a twin bore tpi/lt1 throttle body.
