Alternative Port EFI IntakesThis board is for tech discussions and questions about aftermarket port EFI such as the HSR, MR, SR, BBK, FIRST, etc.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
just a couple of pics of my install. just started her up the other day with the stock 350TPI tune
in the sig are the specs. 9.3:1 HSR 383
first pic is a before pic lol... the TPI did shine up plenty ha! best ran a 14.8 in the 1/4 due to horrible traction on street tires and a non working posi
2nd+3rd pics are the new motor
This ad is not displayed to registered members. Register your free account today and become a member on ThirdGen!
__________________ Formula 383 HSR 9.3:1
SCAT 9000 cast crank, SCAT 4340 forged rods/ARP rod bolts, SRP forged pistons/JE rings, ported HSR, HSR port matched to felpro1206, 58mm TB, grannelli MAF
30lb SVO injectors, patriot 195cc aluminum heads port matched to felpro 1206
XFI280 comp cam, 230/236, .571/.569
1.6 aluminum full roller rockers
handmade aluminum RAM AIR Headman LTs, true dual 3" with 3" xpipe
700r4, built by me, can handle 700hp, beast sunshell, billet servos, transgo shift kit, yadda yadda
march pullies, smog deleted, AC/heat removed
160 thermostat, 166 on fan switch 8pt CEE roll bar, with swing out door bars, hand made thru floor SFC, Jegster tunnel mount tubular TQ arm, Jegster drive shaft safety loop
UMI LCA relocation brackets, UMI adjustable panhard rod, hand made tubular LCA's,TDS wonderbar, KYB struts and shocks, cut moogs 5664/5665, moog suspension tierods etc
SSBC force 10 front calliper upgrade kit, slotted and drilled rotors, stainless braided lines all over car, rebuilt master, SSBC proportioning valve, rebuilt booster, ford 8.8 11.5" rear disks FORD 8.8, rear disks, 3.55 gears, rebuilt carbon fiber clutch trac lock(posi) with f150 preload spring, 28spline axles, ARP cap studs and moser aluminum support girdle.
SLP 17x8's fronts wrapped in Nitto 555 ZR rubber
rears will be 17x10.5 ford rims with 315's
NO2 150shot comin soonnnn!! or dual rear mounted turbos
Sponsored Links
Registered users do not see this ad. Click here to register for free!
last... now with homemade aluminum ram air comes directly from the RAM AIR II hood scoops! seals against the hood so no air gets around and has K&N filters in the hood scoops
thanks guys! cant wait to tune it and get her flyin!!
sry i sold the SLP runners with a ported and matched plenum and matched base with the stock TB and injectors/fuel rails for like 400$ about a year ago. the SLPs do just beg to be opened up tho
14psi, street tune 
