ok this is something ive been trying to cook up for awhile and im just wondering what everyone thinks about it , and if so has anyone seen something like this before or have a website or pics of this , ive seen camaro with suicide doors they are ok but nerver with a exotic door that opens vertical up , it would be alot of work , but very cool when you pull up at the mall with lowered black camaro,just a idea

Would be cool, but would probably cost almost the price of a Lamborghini. Way to expensive and probably not worth all of the effort and work.

Andy

------------------
1987 Iroc w/ LT1
350 Turbo trans
2.25 inch Cowl Hood
Adjustable Nitrous Setup(75-175 Hp)
T-tops

i doubt it would work, the way the tops of out windows fit into the t-tops or roof would be extremly hard to modify to allow the door to open upwards.....

------------------
'87 Trans Am
eXotic F-Body Webpage Webmaster
http://efbody.tripod.com

You coudlnt do it with the doors on the car now. You'd have to use doors that were intended to be gull wing doors, they'd have to be cut to fit, and you'd have to figure out somehow to make the hinges work, and the latch. In other words, you'd need a lot of patience and money and a body shop at your disposal

------------------
86 Trans Am WS6: The muscle car lives

thanks for the comments , well i thought about this alot and yeah the window sits in it wont work inless you can somehow have the whole door slide out about 2 inches then go up would have to trim about a half an inch form the windsheild ledge and bend the front fender out a tad to make the door slide in behind it but you be amazed with what a body shop can do , allso i thought about the old dolorien doors the kind that go out and up , but would be a pain in tight aeras but still cool

better get some lighter doors. One of these heavy a$$ mofos come crashing down on your skull and you'll dead in a mug.

------------------
'91 Z28 Blue/Silver ZZ4/ZF6
328.4 RWHP 363.5 RWTQ

lol @ ZBRA, i was thinking the same thing. OUr doors are definitely some of the heaviest made, no way i'd want to lift 'em to get out. Custom 'glass doors would be in order, probably best to modify the roof and use a full window frame set-up too.
ed

yeah the doors might not feel to good if they come down on ya , ,

Actually Lambo doors open on an angle, not straight up, which I think would be better anyway than Gull-Wing type doors that do open straight up.

------------------
1992 GTA (226 made), 1 of only 18 "Dk. Jade Gray Met. Primar" 92 GTA's, Window Sticker, 305 TPI, 700R4 4-Speed, T-Tops, Grey Leather, every option except rear disk brakes (Oh well, makes it 1 of a kind), and CD.
Current Mods/Upgrades: 80 Series Dual Outlet Flowmaster, TPIS Air Foil, Quaker State HyPo Synthetic 20W-50, and a K&N Oil Filter. THAT'S IT! 98% STOCK!
Future Mods/Upgrades: Subframe Connectors, OE Replacement K&N Air Filter, and Gold 2 1/2 Inch Exhaust Tips.

ICQ #:83285698
"If it ain't broke, fix it til it is!"

[This message has been edited by 92GTA (edited July 27, 2000).]

No kidding ZBRA~ OUCH!! lol. The doors on these pigs aren't full-framed anyways, the glass would never be able to hold the weight of one of these midieval drawbridges. Cool idea, though. Maybe you should submit it to Ron Popeil (you know, the guy who sells spray-on hair in a can), and he can figure somethin' out. Late ~J~

------------------
`85 Z28 5.0L TBI
Don't ever be:
Found On Road Dead!

Just a thought but what if you put the hinge in the middle by the bar between the T-tops and made the tops and doors one piece? Definitely sounds like custom work involving some lexan or plexiglass and a lot of fiberglass.

What would be cooler, is a DeLorean.



------------------
Ryan MacEwen Pruyn
MacEwen Motorsports

1987 GTA 350 6spd, White OEM instruments, 17" Borbet Type A's, 275/40ZR17's, 255/45ZR17's, Koni Sport Adjustables, Eichbach Sport Springs, Poly U, everywhere, Guldstrand Engineering Panhard rod, LCA's

man im kinda shocked that no one has seen anything like this before, hummmmmmm would be diffrent and maybe worth the effort if nowone has done it

I've got pics of a mustang that has had the doors converted to Lambo style.

Are you still thinking about this?

Rob

I asked about this earlier today in the Body and Interior post. I can't believe there's no pekerhead rice comments yet.

Gull-wing doors on a maro/bird could look sweet and they could look retarded.. it all depends

umm not seeing a pic....

lamborghini doors? Sounds like a pekerhead rice idea Haha, no really I would kill to have doors like that...I would also kill for that kind of cash...and if I had that kinda cash i would probably get a 383 stroker instead. Oh well

Maybe or maybe not... but I would have to give some serious "we're not worthy" props to someone who could pull it off and make it work reliably and safely.

Right, to all the duct tape guys out there, don't try this at home.

Like on of the other uys mentioned.. what about if the doors rotated forward instead of a gull wing.. I think these doors first move out then rotate up.. so it would be no problem for our doors.. I wonder if there is enough metal to do this..

I'd assume a frameless window wouldn't be a problem.

http://www.overboost.com/pix.asp?ima...l/DSCN7682.jpg

------------------

• My Firebird

The mind is like a parachute, it only works when its open

[This message has been edited by deadbird (edited July 08, 2001).]

Well if any have actually looked at a eclipse their doors work the same as ours. No upper frame rail, just a soft rubber seal. How I would say it works on that eclipse is the door is loaded an a expandable rod(so it can move out some) and set at a slight outward angle(so it opens slightly sideways). The rubber can "form" over the closed window the same as it does now.
So what can support the weight of the door you ask?. Try an automobile shock. Yes amazed fans I am sure this will be more than able to support the 60-70 pound doors of ours. Now you have to be like the lambo and have a grab strap to pull the door down, which should not be that much effort considering the shock already has 60-70 pounds or so to push it down. So I would guess a slight tug would suffice.
As we all know the challenge would be to find the area and angles to mount the shock in. But I do not think it would be hard to mount a 3 inch by 14 inch shock anywhere though. You would have to mount it to a bracket so it expanded down and not up though.

So if any besides me are really curious to get some ideas to get this to work have fun...Its gonna be a mind frier.

hi guys, that was my old name , and my old post lol, well i was going to try that on my camaro , but its up for sale now, and i went with swapping 4th gen stuff in my firebird, i wanted something diffrent prehaps after i finish my firebird and my buick , ill get another camaro and try it

Well, never seen a pic of one either, but I've thought of this for ever. I've seen the mustang with them and it cost a crap load. I was thinking if someone could make a circular thing to be placed around where the upper hing is and it could push the door outwards and then turn so the door would go up, I've never went out and looked at my door to plan something like that though. But the weight of the door might be a problem. Well now I've gave my secrete away, I'll never be a millionaire
-Carl


------------------
1989 Camaro rs 2.8 v6
Blue w/white stripe
T-Tops 2-15" PG x-max's

1999 Blazer 4dr 4x4
For Sale

A guy that lives near me did this to his Eclipse. I was asking him about them at a local car show and he said it cost about $20000 to do it all, and he did alot of the work himself. Its friggen awesome though. He has hydrolic arms build into the door jambs that lift the doors at the push of a button. Very cool, but VERY complicated and expensive. Oh yeah, you can see a pic by clicking on this message

Eric

------------------
My 1986 Z28
GM350, T-5, 3.23's, lots of go fast goodies, 4th gen Firebird interior etc...
85 IROC w/ 1364 miles!

You'll always find what you've lost in the last place you look

R.I.P Dale Earnhardt

There is an article in one of those ford and mustang mags about a gull-wing mustang, the doors popout about 4-6 in. and then rotate up they also have a feature to where they can open normally for emergencies or battery failure. They opened with the push of a button. They said the guys that did it own a body shop in Michigan or something and can do it to just about any car for $10,000 or some ungodly amount of $ to spend on cool doors.

------------------
89 RS 350 TBI auto Hooker SC/LT headers Open element 3in K&N CVT protorque mini-starter

Daily driver 91 RS auto LO3 63k

New project- 89 Formula 350 WS6
383 or 400 to come!