I used to have an 83 that made me want to jump off a bridge from all its problems.. Sold it a few months ago and bought a fox body mustang.. Now i got an offer for another camaro that is super nice.. Its a 91 z28 with new paint 350 tpi.. The one thing i hate about third gen camaros is the 4 x 4 look to them.. especially the big gap in the back wheels. So the first thing im going to do if i get the car is lower it. Im just looking for some pics of your lowered cars. LMK how many inches you dropped it and what kind of springs. Thanks for helping looking to get back into the camaro game once again

eibach sportline.. suppose to be 1 inch all 4 corners but i beleive the front went down 1 1/2.

Eibach is usually a good spring H&R make a good spring also.

air ride technologies...put it at any height you want:

2' belltech dropped spindles & eibach sportline kit...

That looks perfect.. Do you have any side shots by any chance?

Anyone have a 3" drop?

This is when I installed the new eibach sportline springs, the dropped spindles have been in the car since 1993...way too low!



...and this is what it looks like now after I had to raise the front 1" back up and cut a coil off the back!

love your car sinister. i think you were one of the first to do the hockey stripe and still is the best of that done.

im gonna be dropping my front about an inch or so. gonna chop a coil out of my springs, so i know i prolly need new struts, what type of strut do i need. im gonna get them from my local parts house so im not ordering online, im lookin for some pretty cheap ones. moneys tight (duh)

and if i drop the back dont i have to relocate my brakcets and what not?

sickness how much did you pay for that air ride system and where did you get it form?? (i see a future project)

Pro kit. I believe it drops it an inch all around.

I think I bought it through Summit Racing..but I also bought some extra air ride stuff at a local indoor show. I've got roughly $3000.00 in the setup with installation.

is this too low, intrax spings on 35 series tires, i personally like the height physically but drive wise its a different feeling

That car looks good!

Custom heavy duty springs...cut to height:

s

your car looks great! what rims arew those? and where can i get them?

Those are C6 Corvette rims and you can get them at OE Wheels.

MAN!! great lookin camaro i will soon be as low!!

i dont know what it is about sinister's camaro, but it is probably one of the most fantastic looking third gens here IMO of course

Old post but some one dug it up so...

http://s299.photobucket.com/albums/m...8-16-08004.jpg

87 IROC with iebach sportline spings, stock 245/50/16's and about 150#'s removed from the front end with AC delete, headers and AL heads. The Hamburger oil pan and front ground effects rub on everthing. The rearend didnt drop much from stock.

sickness an sinister you guys have 2 of the best camaros i have ever seen and you guy set thebar really high for the rest of us....giving tons of new and great ideas for our thirdgens...good job guys
here is my 82 camaro berlinetta/ z28 clone ...it has eibach sportline springs....i would like to go lower in the front...but where i live...i already drag exhaust tips on the entrance ways and when i pull into my steep driveway i come 1 inch front dragging chin spoiler...plus ride is stiff as it is..

2" Dropzone springs.

Here's a few of mine, with Hotchkis lowering springs.

heres mine. stock springs cut 3/4's of a coil in the front and 1/2 coil in the back. still rides fine with no problems.

Im runnin intrax here: 2in front and rear

i have summit racings brand of springs

Here is mine with Eibach Sportlines.



I love the look but it does make the car that little bit more impractical.

I second bags!
Was about 2800 into my setup but low when ya want it and great clearance when you live in a state with terrible roads

very nice and clean camaro...love everything bout it ...nicely done...maybe air ride will be in my future....