Matthew91-Z28

I was curious how 'black' the ZR1's looked. They have a pic of them at SLPonline, but I wanted to see them mounted with pictures taken in the sunlight. They seem to be a great deal (set of 4 for $599). Sadly I could not find any f-bod pics! I hope someone here can provide me with a 3rd gen picture with them.

This ad is not displayed to registered members. Register your free account today and become a member on ThirdGen!

Attached Images

s2010059.jpg (140.1 KB, 141 views)

__________________
Suspension Eiback prokit springs, boxed-in stock LCA's with poly bushings, Lakewood panhard rod, boxed panhard bar brace, WS6 36mm front sway bar and 32mm rear sway bar, Koni reds, BMR tubular non-adj torque arm.
ChassisCustom b-pillar brace, custom front subframe reinforcement, custom STB, MAC sfc's, Wonderbar.
Interior 4th gen leather seats, in-dash fan control switch.
Engine Reman/ rebuilt 350, Moroso 8mm spiral core wires, homemade CAI, Edelbrock aluminum H2O pump, K&N air filters.
Exhaust hi-flo cat, Flowmaster cat back exhaust, custom exhaust tips,
Drivetrain rebuilt 3.23 rear with gov-loc posi, HD transmission servo.
Brakes LS1 front brakes.

Jesus built my hotrod: "Where you are doesn't matter unless you can get away from it."

Matthew91-Z28

I think they look great....shiny but more subtle than chrome, budget friendly, and definitely a step up from stock.

Attached Images

s2010058.jpg (159.5 KB, 69 views)

BigBadGTA

this black GTA on ebay has them. edit, I just noticed you were looking for pics of that finish. I personally do not like that dull look. I like chrome.. To me it looks like the rims on that T type are really dirty polished aluminum. I just have the urge to go and clean them and make them shiny...

LINK

__________________


My Cardomain Link

longmire92RS

Here is a couple. The Car belongs to a gentlemen here on this site. I saved these two pics a while ago, the ZR1's in hyper black are "one" of my wheel options...lol.

longmire92RS

OH...almost forgot..and as you can see...they look absolutley SICK!! And yes, very budget friendly deal for a great looking wheel. Hope the pics help!

usamuscle892

do it...! this was one of my wheel options back in the day. can't beat something that was MADE for a thirdgen.

InfernalVortex

Hyperblack looks so much better than chrome. Im thinking about painting my ROH ZR6's hyperblack after I get done restoring them... they're the ones that look like Impala SS wheels...

I think those SLP ZR1's are pretty much the only other wheel I'd want on my car aside from a few serious road racing wheels.

Here's waht I've collected:









These are TGO'ers...


but I thought they didnt make those wheels anymore?

__________________

ziggy89

any pics of them on a bird?

__________________
Its not what you buy its what you build

Stephen

That's Hyper Black? Hyper gray would be a more accurate color.... Look like my Snypers were, when they were stock, before I had them powder coated flat black.

__________________

Custom powder coated flat black ROH Snypers w/the correct 3rd gen offset (no spacers needed, front or rear) Front--275/40R17s on 17"x9"--5" bs & custom widened & custom powder coated Rear--315/35R17s on 17"x11"--7" bs,
4th gen front seats, OEM 2001 TA rear wing, OEM 1997 TA side mirrors
TSP LS1 Cat-back exhaust-UMI Rod Ended STB-UMI Double Rod Ended On-car Adjustable PHB-UMI Performance Adjustable Control Arms with Off-Set Bushings - Ground Control Weight Jacks, Eibach Springs 9.5"-600lb/10"-150lb


To be Installed:
UMI Performance Tie Rod Adjusters-Kenny Brown Double Diamond SFCs

Home of the STS (Sequential Turn Signal) mod
Parting Out - 1989 Pontiac Trans Am GTA


GOD Bless America