Tinted Rear Tail-lights who's done it?
#102
Senior Member
iTrader: (1)
Re: Tinted Rear Tail-lights who's done it?
Going to have to call you out on this. How did you manage this with the tails being rippled? Any tips/hints/tricks would be truly appreciated. My tails are starting to look dull and I'm looking for that gloss tinted shine back.
Looks good. Can you still see the red through it in the day?
Looks good. Can you still see the red through it in the day?
i painted them. I only used one coat of VHT then clear. They are
very glossy and the lights show up great in the day time.
P.S. these lights already appeared tinted from the factory!
#103
Member
iTrader: (7)
Join Date: Mar 2007
Location: NYC
Posts: 416
Likes: 0
Received 1 Like
on
1 Post
Car: 82,83,99 T/As
Engine: 350,350,383
Transmission: ST-10,700r4,4l60e
Axle/Gears: P-3.23,P-3.42?,P-4.10
Re: Tinted Rear Tail-lights who's done it?
Polish them before... got it.
My lights are also tinted from factory, but like I said they are looking a bit faded. I want them glossy tinted. I'll give 1 coat of VHT and clear a shot once bodywork commences.
Thanks!
If you can get a close up pic, that'd be cool.
My lights are also tinted from factory, but like I said they are looking a bit faded. I want them glossy tinted. I'll give 1 coat of VHT and clear a shot once bodywork commences.
Thanks!
If you can get a close up pic, that'd be cool.
#104
Member
Join Date: Jun 2010
Location: New Jersey
Posts: 215
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 Camaro Iroc Z
Engine: V8 305 TPI
Transmission: 700R4
#105
Re: Tinted Rear Tail-lights who's done it?
VHT Nightshade'd. Wipe tail light down with alcohol wipe, spray. let dry. Spray real clear coat, no rattle can, and be done. No polish or sanding or any of that.
Sorry for crappy quality. These were taken with my phone.
Sorry for crappy quality. These were taken with my phone.
#106
Re: Tinted Rear Tail-lights who's done it?
Looks good. So the real clear, versus rattle can clear seems to have made the difference!
#109
Member
iTrader: (10)
Join Date: Jul 2008
Location: Binghamton, NY
Posts: 426
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1986 IROC-Z
Engine: 360cu @ 10.5:1
Transmission: T56 - Pro 5.0
Axle/Gears: 4.10 - Zexel Torsen - Moser Axles
Re: Tinted Rear Tail-lights who's done it?
Tried my hand with VHT Red and Niteshade. I am going to grab another set of tails and do just an amber delete/clearcoat on that set and change between this set I finished and that one based on my mood =P
Stock:
Taped off the grids to keep them black when applying VHT Red:
VHT Red amber delete results (no clearcoat on this, the next set will be like this with clear):
VHT Red, 2 coats VHT Niteshade (3 on reverse lights), and 4 coats of clear drying:
Finished product after 2000 grit wetsanding, Meguire's PlastX, and Meguire's Gold Class paste wax:
They came out a little darker than I wanted, but in the daylight you can easily see the amber delete and the colors in the tailight. That last picture makes them look really black. I would've liked 1 coat of Niteshade, but 1 coat does not cover enough - it speckles pretty badly. Overall though, I'm pleased
Stock:
Taped off the grids to keep them black when applying VHT Red:
VHT Red amber delete results (no clearcoat on this, the next set will be like this with clear):
VHT Red, 2 coats VHT Niteshade (3 on reverse lights), and 4 coats of clear drying:
Finished product after 2000 grit wetsanding, Meguire's PlastX, and Meguire's Gold Class paste wax:
They came out a little darker than I wanted, but in the daylight you can easily see the amber delete and the colors in the tailight. That last picture makes them look really black. I would've liked 1 coat of Niteshade, but 1 coat does not cover enough - it speckles pretty badly. Overall though, I'm pleased
#111
Junior Member
Join Date: Dec 2010
Location: Florida
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro RS
Engine: LT1
Transmission: Stalled 700R4
Axle/Gears: 3.23 Posi
Re: Tinted Rear Tail-lights who's done it?
I had the body shop paint mine with some over reduced black. What do you think?
Chris
Chris
#112
Supreme Member
iTrader: (25)
Join Date: Feb 2006
Location: Manteca,California. Nor Cal.
Posts: 7,260
Likes: 0
Received 5 Likes
on
5 Posts
Car: SOLD IT. Mopar guy only now.
Engine: gone
Transmission: gone
Axle/Gears: gone
Re: Tinted Rear Tail-lights who's done it?
I like them. I really hate the amber on my taillights that is my main goal to eliminate the amber then i'll try and do a coat or two of nightshades and see how it looks
#114
Supreme Member
iTrader: (25)
Join Date: Feb 2006
Location: Manteca,California. Nor Cal.
Posts: 7,260
Likes: 0
Received 5 Likes
on
5 Posts
Car: SOLD IT. Mopar guy only now.
Engine: gone
Transmission: gone
Axle/Gears: gone
Re: Tinted Rear Tail-lights who's done it?
Oh yeah deffiantely will do the red first and see how I like them. That may be enough. The blacked out taillights would match my car but I dont like dealing with the cops on stuff like that
#115
Supreme Member
Join Date: Feb 2006
Location: St.Louis, IL
Posts: 1,366
Likes: 0
Received 1 Like
on
1 Post
Car: 1988 Camaro
Engine: 377
Transmission: TH350; Circle D 4200 converter
Axle/Gears: Ford 9"
Re: Tinted Rear Tail-lights who's done it?
The last set I did with VHT. I have a gun now, so it's probably going to be my last set rattlecanning.. but the end result isn't bad once you get the hang of it.
I did a complete writeup on exactly how to do this on one of the Thunderbird forums somewhere. I can dig it up if any of you need to look at it for step-by-step directions.
I did a complete writeup on exactly how to do this on one of the Thunderbird forums somewhere. I can dig it up if any of you need to look at it for step-by-step directions.
#120
Member
iTrader: (2)
Join Date: Feb 2003
Location: ME
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 IROC-Z
Engine: LS1-ish
Transmission: T56 stage II
Axle/Gears: S60 4:10's
Re: Tinted Rear Tail-lights who's done it?
I tinted mine with Niteshade. I removed the lens from the housing in sprayed them from the inside. They have been done for about ten years now. Easy maintenance, I just wax the lens each time I wax the car.
#121
Member
iTrader: (2)
Join Date: Sep 2010
Location: Birmingham, AL
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Camaro Z28 Clone
Engine: Bored .030, vortec sbc350
Transmission: Built T5 WC
Axle/Gears: 1999 Torsen 4:10 Locker
Re: Tinted Rear Tail-lights who's done it?
Had sometime this weekend and got some little projects out of the way... VHT + Clear
Rainy outside so sorry its dark
Rainy outside so sorry its dark
#123
Re: Tinted Rear Tail-lights who's done it?
VHT always looks dull. Gotta clear them. Having a shop do it is night and day differance. Mirror finish. I've vht'd a few and I always remove it.
#124
Re: Tinted Rear Tail-lights who's done it?
#125
Supreme Member
iTrader: (3)
Join Date: Jan 2004
Location: Las Vegas
Posts: 2,663
Likes: 0
Received 239 Likes
on
179 Posts
Car: 1987 Formula (original owner)
Engine: 305 TPI
Transmission: T5
Axle/Gears: 9-bolt/3.45
Re: Tinted Rear Tail-lights who's done it?
Updated in reply #129
Last edited by LAFireboyd; 04-16-2012 at 05:06 PM.
#127
Supreme Member
iTrader: (1)
Join Date: Jan 2000
Location: san jose, ca
Posts: 1,110
Likes: 0
Received 6 Likes
on
6 Posts
Car: 1990 IROC-Z (De-Badged-Carbon Hood)
Engine: Superram 383
Transmission: T-56 w/upgraded Viper Internals
Axle/Gears: 3.73 18x8 and 18x11 irocs
Re: Tinted Rear Tail-lights who's done it?
nice ****....
#128
Junior Member
Join Date: Feb 2012
Location: Illinois
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 RS vert
Engine: forged 383
Transmission: a busted one for now ;)
Axle/Gears: 4th gen 3.73
Re: Tinted Rear Tail-lights who's done it?
I got covers, because I don't like them being permanent but the covers look flush and stock and really nice.Used VHT on my truck though, 4 coats and I cn see them perfectly
#129
Supreme Member
iTrader: (3)
Join Date: Jan 2004
Location: Las Vegas
Posts: 2,663
Likes: 0
Received 239 Likes
on
179 Posts
Car: 1987 Formula (original owner)
Engine: 305 TPI
Transmission: T5
Axle/Gears: 9-bolt/3.45
Re: Tinted Rear Tail-lights who's done it?
The topic does say tinted, so that doesn't necessarily mean black. So I redded-out the amber sections.
First experimenting with a damaged set of Formula taillights, I tried "smoking" the lenses and then blacking them out, and I didn't like how either looked.
So with a good set of taillights and Nite Shades Red, I "redded" and clearcoated only the amber sections(leaving the rest of the lenses as natural plastic), and I worked only on the outside of the lenses. They came out transparent, smooth, glossy and very natural-looking.
Then with a simple wiring mod to the base 'bird taillight harness, allowing you to change the turn signals into turn/tail lights(as outlined in the linked thread), then moving them up to the red sections, these taillights can be made to work similarly to TA taillights. It's an alternative to swapping to TA taillights.
https://www.thirdgen.org/forums/auto...ula-trans.html
And for the record, redding-out the amber lense on the inside doesn't work(unless you're blacking-out the entire lense); I opened-up a damaged taillight and tried this. The amber lense is thick, so from the outside it still looks very amber.
First experimenting with a damaged set of Formula taillights, I tried "smoking" the lenses and then blacking them out, and I didn't like how either looked.
So with a good set of taillights and Nite Shades Red, I "redded" and clearcoated only the amber sections(leaving the rest of the lenses as natural plastic), and I worked only on the outside of the lenses. They came out transparent, smooth, glossy and very natural-looking.
Then with a simple wiring mod to the base 'bird taillight harness, allowing you to change the turn signals into turn/tail lights(as outlined in the linked thread), then moving them up to the red sections, these taillights can be made to work similarly to TA taillights. It's an alternative to swapping to TA taillights.
https://www.thirdgen.org/forums/auto...ula-trans.html
And for the record, redding-out the amber lense on the inside doesn't work(unless you're blacking-out the entire lense); I opened-up a damaged taillight and tried this. The amber lense is thick, so from the outside it still looks very amber.
Last edited by LAFireboyd; 05-05-2012 at 02:24 AM.
#130
Member
iTrader: (2)
Join Date: Mar 2012
Location: SoCali
Posts: 361
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Pontiac Firebird Formula
Engine: V8 5.0 305 TBI
Transmission: 700R4 with B&M MegaShifter
Axle/Gears: Gear Ratio: 2.73 Ring Gear: 7 5/8
Re: Tinted Rear Tail-lights who's done it?
The topic does say tinted, so that doesn't necessarily mean black. So I redded-out the amber sections.
First experimenting with a damaged set of Formula taillights, I tried "smoking" the lenses and then blacking them out, and I didn't like how either looked.
So with a good set of taillights and Nite Shades Red, I "redded" and clearcoated only the amber sections(leaving the rest of the lenses as natural plastic), and I worked only on the outside of the lenses. They came out transparent, smooth, glossy and very natural-looking.
Then with a simple wiring mod to the base 'bird taillight harness, allowing you to change the turn signals into turn/tail lights(as outlined in the linked thread), then moving them up to the red sections, these taillights can be made to work similarly to TA taillights. It's an alternative to swapping to TA taillights.
https://www.thirdgen.org/forums/auto...ula-trans.html
And for the record, redding-out the amber lense on the inside doesn't work(unless you're blacking-out the entire lense); I opened-up a damaged taillight and tried this. The amber lense is thick, so from the outside it still looks very amber.
First experimenting with a damaged set of Formula taillights, I tried "smoking" the lenses and then blacking them out, and I didn't like how either looked.
So with a good set of taillights and Nite Shades Red, I "redded" and clearcoated only the amber sections(leaving the rest of the lenses as natural plastic), and I worked only on the outside of the lenses. They came out transparent, smooth, glossy and very natural-looking.
Then with a simple wiring mod to the base 'bird taillight harness, allowing you to change the turn signals into turn/tail lights(as outlined in the linked thread), then moving them up to the red sections, these taillights can be made to work similarly to TA taillights. It's an alternative to swapping to TA taillights.
https://www.thirdgen.org/forums/auto...ula-trans.html
And for the record, redding-out the amber lense on the inside doesn't work(unless you're blacking-out the entire lense); I opened-up a damaged taillight and tried this. The amber lense is thick, so from the outside it still looks very amber.
#131
Senior Member
Join Date: Mar 2010
Location: LI, NY
Posts: 864
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1985 IROC-Z
Engine: 355
Transmission: T5
Axle/Gears: 3.42 10 Bolt Posi
Re: Tinted Rear Tail-lights who's done it?
Lots of people do it, few do it right.
I am not saying I do it right per say but its better than slapping the rattle can VHT on some non prepped. Not knocking VHT nightshades, its a good product and I have used it. There are better ways though.
Wet sand the lights w 800 grit. Clean with wax/grease remover. Apply adhesion promoter. I use sikkens clear/ jet black mixed to a certain ratio. Even coat to desired darkness. One heavy coat of sikkens clear over top. I use my sharpe detail gun 1.0mm tip. You can use other brands of course but this is what I use.
I am not saying I do it right per say but its better than slapping the rattle can VHT on some non prepped. Not knocking VHT nightshades, its a good product and I have used it. There are better ways though.
Wet sand the lights w 800 grit. Clean with wax/grease remover. Apply adhesion promoter. I use sikkens clear/ jet black mixed to a certain ratio. Even coat to desired darkness. One heavy coat of sikkens clear over top. I use my sharpe detail gun 1.0mm tip. You can use other brands of course but this is what I use.
Last edited by blackbmagic; 05-09-2012 at 12:02 PM.
#132
Member
iTrader: (3)
Join Date: Apr 2009
Location: D Heights, Mi
Posts: 249
Received 0 Likes
on
0 Posts
Car: 1989 Camaro
Engine: Sbc 355
Transmission: TH350
Axle/Gears: 3.42 Detroit locker
Re: Tinted Rear Tail-lights who's done it?
I used VHT. sorry for little darker image. but can see the lenses are blacked out with the reverse cleared out.
#133
Member
iTrader: (2)
Join Date: Sep 2010
Location: Birmingham, AL
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Camaro Z28 Clone
Engine: Bored .030, vortec sbc350
Transmission: Built T5 WC
Axle/Gears: 1999 Torsen 4:10 Locker
Re: Tinted Rear Tail-lights who's done it?
I happen to think that looks good. I like it. Different.
~~~
Mine aren't blacked...but are tinted. Thinking about going a shade darker...
#134
Member
iTrader: (3)
Join Date: Apr 2009
Location: D Heights, Mi
Posts: 249
Received 0 Likes
on
0 Posts
Car: 1989 Camaro
Engine: Sbc 355
Transmission: TH350
Axle/Gears: 3.42 Detroit locker
Re: Tinted Rear Tail-lights who's done it?
thanks. Try to be alittle different. They are glossy too cause I wet sanded them when I was finished and cleared them.
(side note.. what springs are on you car I like the stance?) (nevermind seen your sig. lol.) intrax
(side note.. what springs are on you car I like the stance?) (nevermind seen your sig. lol.) intrax
#135
Member
iTrader: (2)
Join Date: Sep 2010
Location: Birmingham, AL
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Camaro Z28 Clone
Engine: Bored .030, vortec sbc350
Transmission: Built T5 WC
Axle/Gears: 1999 Torsen 4:10 Locker
Re: Tinted Rear Tail-lights who's done it?
They are a true 2in drop. They drive nice, not horribly stiff, the few corvettes Ive driven where worse on the road bounce.
I paired them with the kybgr2 shocks and I love it! Car handles like its half its size.
#136
Member
iTrader: (3)
Join Date: Apr 2009
Location: D Heights, Mi
Posts: 249
Received 0 Likes
on
0 Posts
Car: 1989 Camaro
Engine: Sbc 355
Transmission: TH350
Axle/Gears: 3.42 Detroit locker
Re: Tinted Rear Tail-lights who's done it?
very nice.. anything to compare to those..
Sry to op not trying to thread jack.
Sry to op not trying to thread jack.
#139
Junior Member
Join Date: Feb 2012
Location: Illinois
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 RS vert
Engine: forged 383
Transmission: a busted one for now ;)
Axle/Gears: 4th gen 3.73
Re: Tinted Rear Tail-lights who's done it?
I want to spray mine but when i dId my bumper lenses with VHT, my newer lamp came out perfect and my older one was cracked and spider webbing..anyone ever get this?
#140
Junior Member
Join Date: May 2012
Location: Santa fe, New Mexico
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Iroc-z
Engine: Stock 305 lb9
Transmission: 700R4
Axle/Gears: Really dont know
Re: Tinted Rear Tail-lights who's done it?
When i did mine im not sure witch one i used cuz i have them both the rust-oleum and the vht one of them faded away in like 4 months and im pretty sure it was the rust-oleum one cuz i did my parking lights,side markers and my foglights and they look darker then my taillights when i did them
#141
Member
iTrader: (3)
Join Date: Apr 2009
Location: D Heights, Mi
Posts: 249
Received 0 Likes
on
0 Posts
Car: 1989 Camaro
Engine: Sbc 355
Transmission: TH350
Axle/Gears: 3.42 Detroit locker
Re: Tinted Rear Tail-lights who's done it?
I have had the webbing cracks in the front turn lamps, I sanded them out completely then went with lighter and lighter sand paper. Once that was done then I blacked them out with great success.
#142
Junior Member
Join Date: Feb 2012
Location: Illinois
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 RS vert
Engine: forged 383
Transmission: a busted one for now ;)
Axle/Gears: 4th gen 3.73
Re: Tinted Rear Tail-lights who's done it?
What grits did you use?
Even then im afraid of doing it on my tails. I did them
On my brand new Tahoe tail lights with perfect success. I dont want to be sanding and sanding and sanding my tails
Even then im afraid of doing it on my tails. I did them
On my brand new Tahoe tail lights with perfect success. I dont want to be sanding and sanding and sanding my tails
#143
Member
iTrader: (3)
Join Date: Apr 2009
Location: D Heights, Mi
Posts: 249
Received 0 Likes
on
0 Posts
Car: 1989 Camaro
Engine: Sbc 355
Transmission: TH350
Axle/Gears: 3.42 Detroit locker
Re: Tinted Rear Tail-lights who's done it?
um.. If I remember correctly I used like 1000 grit, then worked way up to wet sanding with like 3000. IIRC
#144
Junior Member
Join Date: Dec 2010
Location: wv
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 trans am gta
Engine: 350 tpi
Transmission: 700r4
Axle/Gears: 3.27
Re: Tinted Rear Tail-lights who's done it?
Cant wait to do this to my 87 ta hopefully it will hide the delamination of grid!
#145
Member
iTrader: (3)
Join Date: Oct 2009
Location: Newton, Massachusetts
Posts: 314
Likes: 0
Received 3 Likes
on
3 Posts
Car: '83 Sport Coupe
Engine: 360
Transmission: T5
Axle/Gears: 10 bolt 3.73 TrueTrac
Re: Tinted Rear Tail-lights who's done it?
2 coats of tint on the amber lenses only... The full black out didn't flow well with my car.
http://www.flickr.com/photos/53106660@N03/7292445268/
http://www.flickr.com/photos/53106660@N03/7292445268/
#147
Junior Member
Join Date: Dec 2010
Location: wv
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 trans am gta
Engine: 350 tpi
Transmission: 700r4
Axle/Gears: 3.27
Re: Tinted Rear Tail-lights who's done it?
looks great fredbear, are you going to tint the brake light?
#150
Supreme Member
iTrader: (1)
Join Date: Jun 2001
Location: Tacoma, Wa
Posts: 3,109
Likes: 0
Received 25 Likes
on
17 Posts
Car: '91 TA vert
Engine: turboLSx
Transmission: T56
Axle/Gears: 3.23
Re: Tinted Rear Tail-lights who's done it?
I think they look best when tinted/sanded/polished. Dull tail lights really kill the backend of the car.